Independent Australian Cost Guides
Updated November 2026
← All commercial trades

How much do commercial garage doors cost in Adelaide?

Commercial garage doors run $2,750–$24,250
installed, depending on door type, size and automation
In Adelaide, the $2,750–$24,250 span runs from an installed industrial roller shutter at the bottom to a high-speed rapid-roll door, supplied and installed, at the top. A Lonsdale workshop pricing a sectional overhead door is looking at $3,350–$19,200 installed, then $145–$340 per door per year for servicing.
+5.6% Commercial garage door prices are up around 5.6% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Industrial Roller Shutter
$4,400
per commercial roller door, installed
Roller Shutter
$2,750–$11,650
Insulated
$280–$380/m²
Sectional
$3,350–$19,200
Roller $2,750Sectional $9,400High-speed $24,250

A commercial garage door in Adelaide costs $2,750–$24,250 installed, from a basic industrial roller shutter at the bottom of that span to a high-speed rapid-roll door at the top. Within each door type, the opening size and whether a motor is fitted move the price most: a manual roller door around 3m x 3m is $1,950–$3,500 installed, and $3,100–$5,350 once motorised.

Most of the city's door work is on the industrial flats north and west of the CBD, where warehouses, food and wine storage and transport depots need wide openings, plus workshops and showrooms along the main arterial roads. Hot summers are the local factor, and insulated sectional panels, at $280–$380 per m² supplied, are often specified for docks and temperature-controlled rooms.

Ongoing costs are a door service at $145–$340 a year and, eventually, a replacement motor or operator at $730–$2,425 per door. Roller door and shutter prices include GST; sectional, insulated-panel and rapid-roll figures are ex GST, as the table marks them.

Comparing cities, or after the Australia-wide picture? See the national guide: How much do commercial garage doors cost in Australia?

Quick answerA commercial garage door costs $2,750–$24,250 installed depending on type — roller shutters at the low end, high-speed rapid-roll doors at the top. Get free commercial quotes →

Commercial Garage Door Prices in Adelaide 2026: Cost Table and Price List

ServiceLowTypicalHigh
Industrial roller shutter (per door, installed)$2,750installed$4,400$11,650
Insulated commercial door (PU-core sectional, supply only, per sqm of door, ex GST)$280/sqm$330$380
Commercial sectional overhead door (installed, ex GST)$3,350installed$9,400$19,200
High-speed / rapid-roll door (supply + install, ex GST)$10,650supply+install$14,550$24,250
Roller door ~3m x 3m, manual (installed)$1,950installed$2,575$3,500
Roller door ~3m x 3m, motorised (installed)$3,100installed$4,075$5,350
Roller door ~4m x 4m, motorised (installed)$4,475installed$5,550$7,300
Roller door ~5m x 5m, motorised (installed)$5,850installed$7,100$9,700
Door motor / operator replacement$730per door$1,225$2,425
Annual door service (per door)$145per year$245$340
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local installer will be in touch about your job. No spam, no call centre.

Scoping a commercial garage door? Get a quote from an Australian commercial door installer — free, no obligation.

Get commercial quotes →
Prices verified November 2026 · Cross-referenced against Australian commercial garage door suppliers · See methodology

Prices include GST unless the row says ex GST. Adelaide-wide, November 2026. Large or custom openings vary.

Commercial garage door types and what they cost

Industrial roller shutters

$2,750–$11,650 installed

Many bays across Wingfield, Regency Park and Gepps Cross close with one, from transport depots to recycling sheds. A single forklift opening with a modest motor sits low; a wide, heavy-gauge curtain on a three-phase drive moves towards the higher end.

Commercial sectional doors

$3,350–$19,200 installed, ex GST

They suit car dealerships along Main North Road and trade showrooms in Mile End and Thebarton, where the door faces the public and an insulated panel helps keep summer heat off the floor.

Rapid-roll doors

$10,650–$24,250 supplied and installed, ex GST

They fit busy chilled openings at the produce market in Pooraka, food and beverage plants in the northern suburbs and wine logistics sheds, where the door cycles through the day and refrigeration costs climb every second it stays open.

Insulated sectional doors

$280–$380 per m² of door, supply only, ex GST

Installation is quoted on top of the supply figure. Adelaide cold stores and temperature-controlled wine storage specify them, because heatwave days drive refrigeration hard and an uninsulated door lets heat straight in.

Pedestrian access doors

quoted per door

A walk-through door within the main door or beside it, so staff come and go without raising a big shutter and letting hot air in. Each is priced per door to its frame, lock and closer.

Commercial vs residential garage doors — why commercial costs more

A Port Adelaide or Edinburgh Parks door is built for loads a house door never sees. Trucks and forklifts can pass through dozens of times a shift, so the operator is duty-rated and often three-phase, the curtain or panels are heavier gauge, and springs and barrels are sized for wider, taller spans. Heat adds strain, with summer days over 40 degrees testing seals and motors. Interlocks and work scheduled around trading round out a price well clear of any household door.

Commercial garage door sizes and how size drives price

Adelaide roller door prices climb with the opening. A manual door around 3m x 3m costs $1,950–$3,500 installed, and motorising it brings that to $3,100–$5,350, fine for a van at a Lonsdale trade unit. About 4m x 4m, for light trucks, is $4,475–$7,300 motorised. Around 5m x 5m, enough for a rigid truck at a Dry Creek depot, the price is $5,850–$9,700. Beyond those sizes the job is quoted as an industrial shutter.

What Actually Moves the Commercial Garage Door Cost in Adelaide

How to Keep the Commercial Garage Door Cost Sane in Adelaide

1
Note the clear opening, headroom, side room and daily cycles on one sheet and give it to every installer, so the quotes describe one door.
2
Service each door yearly at $145–$340 a year, ideally in spring, so springs and seals are right before the heat arrives.
3
Replace a worn operator rather than a sound door, and ask whether the existing guides and barrel can stay.
4
Ask for a quote that separates the door, operator, electrical work and old-door removal, so extras can be trimmed without downgrading the door.
5
Leave a manual roller door on a store that opens once a day, and keep the motor budget for bays that cycle through every shift.

Commercial garage door cost by door type

Quick answerAdelaide commercial doors price by type: an industrial roller shutter at $2,750–$11,650 installed, a commercial sectional door at $3,350–$19,200 installed ex GST, and a rapid-roll door at $10,650–$24,250 supplied and installed ex GST.

The type fixes the price range before size and options do. Steel shutters are the low-cost, secure choice for depots, sheds and recycling yards on the northern and western industrial flats. Sectional doors cost more because of their panels, tracks and torsion springs, and they give a tighter, insulated seal and a cleaner face for showrooms. Rapid-roll doors sit highest and justify themselves only where an internal or chilled opening is busy all day. The sectional and rapid-roll figures here are ex GST, so add it before comparing.

Our Methodology

Commercial pricing on this page is compiled from Australian commercial and industrial garage-door suppliers and installers, published supplier price guides and product ranges as of November 2026. We cross-reference ranges from multiple sources; no contractor can influence a published figure. All prices are estimates, GST-inclusive unless a row says ex GST, and will vary with your specific opening, door spec and site. Always get multiple written quotes. Last reviewed November 2026. Read our full methodology →

Commercial garage door prices, product by product

Industrial roller shutters run $2,750–$11,650 per door installed, typically $4,400. Each is a roll-formed steel curtain wound on a barrel above the opening, with guides at each side. Width and gauge drive the price, then the operator, from a chain hoist to a three-phase motor, and extras such as wind locks or a ventilated curtain.

Commercial sectional overhead doors cost $3,350–$19,200 installed, ex GST, with $9,400 typical. Rigid panels hinge together and lift along tracks into the roof space, so trusses, lights and sprinklers above the opening affect the layout. Insulated steel, full-view aluminium for a showroom, windows and a wicket door move a door through the band.

An insulated PU-core sectional door is $280–$380 per m² of door, ex GST and supply only, around $330 per m² typically. A dock door 5m wide and 4.5m high is 22.5 m², about $7,425 ex GST to supply at the typical rate, with installation quoted on top. Panel thickness and seals move the rate.

Rapid-roll doors cost $10,650–$24,250 supplied and installed, ex GST. Buyers pay for a fast fabric curtain, a drive and controller built for constant cycling, and radar or loop sensors. Internal doors between cool rooms and dispatch sit lower, while external doors exposed to weather need curtains and guides able to resist wind pressure inward and outward.

Commercial garage doors — go deeper

Which door for which job?

A transport depot, recycling yard or warehouse at Wingfield, Gepps Cross or Dry Creek: an industrial roller shutter with a duty-rated operator and wind locks for wide bays.

A car dealership or trade showroom on Main North Road or in Mile End: an insulated sectional door, partly glazed, to keep heat out and look tidy to customers.

A food plant, cold store or wine logistics shed: rapid-roll doors on internal chilled openings and insulated sectionals on external docks, so cool air stays in through heatwaves.

Red flags when comparing commercial door installers

Roller door sizes and prices in Adelaide

Before comparing Adelaide quotes, match the opening to the largest vehicle that will use it. A van or ute bay in a Regency Park trade unit fits the 3m x 3m size, at $1,950–$3,500 installed as a manual door or $3,100–$5,350 installed with a motor. Light trucks backing into a Wingfield shed want about 4m x 4m, $4,475–$7,300 installed, while a rigid truck at an Edinburgh Parks depot calls for about 5m x 5m, $5,850–$9,700 installed.

On a site with several bays, the cost scales door by door. Three motorised 4m doors along one warehouse wall come to $13,425–$21,900 installed, from $4,475–$7,300 for each door. Where a job lands inside each band depends on curtain gauge, wind locks for an exposed yard, an operator sized to the daily cycles and whether an old door has to come out first. Doors that take forklift knocks all day are often quoted as an industrial roller shutter instead, $2,750–$11,650 installed, with the weight of steel and the drive setting the figure.

After installation, allow $145–$340 a year for each door's service, a check of springs, guides and the motor, and $730–$2,425 per door when an operator gives out. Adelaide's hot summers matter at chilled docks: a cool room or wine store opening often takes an insulated sectional instead, at $280–$380 per square metre, a supply-only figure quoted ex GST, so fitting is priced on top.

Insulated commercial dock door cost in Adelaide for cool rooms and loading bays

Insulated commercial dock doors in Adelaide are usually polyurethane-core sectional panels, and the panel itself costs $280–$380 per square metre of door, supply only and ex GST, with $330 per square metre typical. Installed as a complete sectional overhead door with tracks, springs and hardware, a commercial sectional costs $3,350–$19,200 ex GST, typically around $9,400. The spread reflects size, panel thickness, windows or pass doors, and whether the door is motorised.

Adelaide's hot, dry summers are the main reason insulated doors are specified. Food, wine and cold-chain businesses in Wingfield, Regency Park, Edinburgh Parks and Lonsdale use them on loading docks to hold temperature, and the door often has to seal against a dock leveller and shelter. Busy docks may pair an insulated sectional with an internal high-speed rapid-roll door, which costs $10,650–$24,250 supplied and installed, ex GST. Motor replacement on an existing dock door runs $730–$2,425 per door.

Dock doors cycle many times a shift, so servicing matters: an annual service is $145–$340 a year per door. Where insulation is not needed, an industrial roller shutter costs $2,750–$11,650 installed. A good Adelaide insulated dock door quote should give the door width and height, panel thickness and core type, the price split between supply and installation, the seals and dock shelter interface, the motor and safety devices included, and whether figures are ex GST.

What a Compliant Commercial Garage Door Quote Includes — Cost in Adelaide

A commercial garage door quote in Adelaide should spell out the door, the opening and the price basis before anyone compares totals. Some rows on this page are ex GST and others installed, so the quote needs to say which it is on every line.

Frequently Asked Questions — Commercial Garage Door Cost in Adelaide

How much is an industrial roller door in Adelaide?
Going by our Adelaide table, expect $2,750–$11,650 for an industrial roller shutter (per door, installed); the typical price is $4,400.
What does a sectional overhead door cost in Adelaide?
In our Adelaide table, a commercial sectional overhead door (installed) runs $3,350–$19,200, and $9,400 is typical.
How much does a roller door cost in Adelaide?
In our Adelaide table: a manual roller door about 3 m x 3 m $1,950–$3,500 installed, a motorised one about 3 m x 3 m $3,100–$5,350 installed and a motorised one about 4 m x 4 m $4,475–$7,300 installed.
What does it cost to replace the motor on an automatic commercial door in Adelaide?
Replacing the motor or operator on an automatic commercial door in Adelaide costs $730–$2,425 per door, typically $1,225 per door. Light single-phase units for small roller doors sit at the low end, while heavy three-phase operators for wide industrial shutters sit near the top. Adding an annual service at $145–$340 per year keeps springs balanced and limits set, which takes strain off the new motor.
What should an Adelaide roller door installation quote include?
An Adelaide roller door installation quote should state the clear opening size, curtain colour and finish, manual or motorised operation, safety beams, and removal of the old door. As a guide, a motorised door around 3m x 3m is $3,100–$5,350 installed and one around 5m x 5m is $5,850–$9,700 installed. Crane hire, new structural steel and after-hours work on trading premises are often extras, so ask for them as separate lines.
What do insulated dock doors cost for an Adelaide loading bay?
Insulated dock door panels in Adelaide cost $280–$380 per square metre of door, ex GST and supplied without fitting, so a wide dock opening is priced on its area before fitting. As a complete commercial sectional overhead door with tracks, springs and an operator, the installed price is $3,350–$19,200 ex GST. Ask for the panel thickness and seal details in writing so quotes for the same dock can be compared.
How much does an annual commercial door service cost in Adelaide?
Servicing a commercial door in Adelaide runs $145–$340 per door each year, with $245 the usual figure. The technician checks spring tension, cleans and lubricates the guides, tests the motor limits and the safety reversing, and looks at wind locks on exposed doors. Shutters on dusty northern-suburbs yards and shopfront doors around Norwood or Glenelg that open dozens of times a day both wear faster, so a yearly visit catches worn bearings before a door jams shut on a trading morning.
What does a high-speed rapid-roll door cost in Adelaide?
A rapid-roll door in Adelaide is priced at $10,650–$24,250 supply and install, ex GST, with $14,550 typical. These fabric-curtain doors suit internal openings at food processors, cold stores and distribution sheds where forklifts pass all day and a slow steel door would let chilled air escape. Opening size, cycle speed, a vision panel and whether a radar or loop detector triggers the door all shift the quote within that span, and larger external openings with wind-rated curtains sit at the upper end.
What does a 5m x 5m motorised roller door cost for an Adelaide depot?
A motorised roller door of around 5m by 5m is $5,850–$9,700 installed in Adelaide, typically $7,100. That opening suits trucks, buses and machinery at transport yards and workshops across the northern and western industrial belt. The price covers the curtain, drum, guides, operator and commissioning on an existing opening; a heavier curtain gauge, wind locks for an exposed plains site, or a lintel repair before fitting push a quote toward the upper figure. Compare it with an industrial roller shutter at $2,750–$11,650 installed when the door will cycle heavily every shift.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage