Independent Australian Cost Guides
Updated November 2026
← Commercial Plumbing across Australia

How much does commercial plumbing cost in Adelaide?

Commercial plumbing in Adelaide runs $88-$145/hr
per hour, GST included - job and contract pricing below
On an office block along Greenhill Road, $88–$145 per hour pays for repair labour, and backflow testing is priced separately: $130–$280 per job for the first device, then $76–$130 per device for each additional one.
+5.1% Commercial plumbing costs in Adelaide are up around 5.1% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Hourly rate, commercial in Adelaide
$105/hr
per hour, Adelaide 2026, GST included
Hourly rate, commercial
$88-$145
Backflow test, first device
$130-$280
Backflow test, additional device
$76-$130
$88$105$145

Commercial plumbing labour in Adelaide is billed at $88–$145 an hour, and $105 an hour is typical. The rate is only part of a repair bill: minimum charges, after-hours loadings and how long fault-finding takes in older pipework decide what a job finally costs.

Commercial work divides between repairs and fit-outs for shops, offices and venues in the CBD, Norwood, Unley and Glenelg, and industrial plumbing across the northern and western suburbs. Hard water and shifting clay keep valves, hot water units and old sewers under strain, so a written plumbing report or camera inspection often comes before a larger repair is priced.

Recurring costs are mostly backflow and TMV work: testing the first backflow device costs $130–$280 per job, every extra device on the same visit $76–$130 per device, and TMV servicing $120–$240 per valve. Prices shown include GST.

Quick answerCommercial plumbing in Adelaide runs $88-$145/hr in 2026, with backflow, TMV and trade-waste compliance priced per device. All figures on this page include GST. Get free Adelaide quotes →

Commercial Plumbing Prices in Adelaide 2026: Cost Table, Price List and Hourly Rates

ServiceLowTypicalHigh
Hourly rate, commercial$88per hour$105$145
Backflow test, first device$130per job$190$280
Backflow test, additional device$76per device$110$130
Backflow device supply + install$520per job$1,050$2,150
TMV annual test/service$120per valve$175$240
Grease trap supply + install$4,325per job$6,900$10,400
Grease trap service/pump-out$215per job$345$560
Drain jetting$260per job$475$1,025
CCTV drain inspection$215per job$390$775

Scoping commercial plumbing work in Adelaide? Get a quote from a local commercial contractor - free, no obligation.

Get Adelaide quotes →

Prices include GST. Adelaide metro, November 2026.

What does backflow testing cost in Adelaide?$130-$280 for the first device and $76-$130 for each additional device tested on the same visit. In South Australia the Office of the Technical Regulator, not SA Water, says each testable device has to be tested once a year by a licensed plumber.
What do commercial plumbers charge per hour?$88-$145 per hour in Adelaide in 2026, with compliance work (backflow, TMV) usually quoted per device or per valve rather than hourly.

Worked Commercial Plumbing Cost Scenarios — Adelaide

Adelaide commercial plumbing often comes down to hospitality grease, industrial backflow and valve rounds at care homes. The three jobs below, from a Gouger Street kitchen to a Wingfield processor and a Burnside aged-care home, are costed line by line from this page's rows.

Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local contractor will be in touch about your job. No spam, no call centre.

Scoping commercial plumbing work in Adelaide? Get a quote from a local commercial contractor - free, no obligation.

Get Adelaide quotes →

Prices include GST. Adelaide metro, November 2026.

Commercial Plumbing Costs by Sector in Adelaide

Adelaide's commercial plumbing work gathers in a few distinct places: dense food trade just west of Victoria Square, a hospital and research strip on North Terrace, northern defence and manufacturing sites, southern wineries and an old bluestone port.

Backflow Testing in Adelaide

On this page, the first backflow device tested on an Adelaide visit costs $130–$280 per job, with $190 typical, and each additional one on the same visit is $76–$130 per device. A March 2026 plumbing advisory note from the Office of the Technical Regulator says all testable backflow prevention devices must be tested annually by a licensed plumber, so every testable device on a site comes up each year.

Supplying and installing a new device costs $520–$2,150 per job. The Office of the Technical Regulator says backflow prevention devices must be installed and commissioned by a licensed plumber who has backflow prevention accreditation on their licence, so ask to see that accreditation before the work is booked. The Office of the Technical Regulator also says the device's commission, inspection and maintenance report must be sent to it within seven days, by email or by post, and that forms are only needed once the valve has passed.

Thermostatic mixing valves are quoted on their own at $120–$240 per valve for a test and service, and repair time beyond that is billed at the commercial rate of $88–$145 per hour. Clinics, schools and aged care homes with many valves can have them done alongside the backflow round.

What Adelaide Commercial Plumbing Jobs Actually Cost

In Adelaide, the low end of the table is a modern Norwood or Unley tenancy on one water service, close to most depots: a single backflow test at $130 per job, or an hour or two at $88 an hour. Jetting climbs towards $1,025 per job when old clay sewers in the inner east have cracked through a dry summer, and travel time adds to any job at either end of a long metro area, from Gawler down to Aldinga.

Ask for camera footage and a marked-up drain plan before agreeing to cut a slab, and ask whether travel to the outer north or south is charged as time or a flat fee. On hard-water sites, have descaling of hot water units and mixing valves priced as its own line, not hidden in labour hours.

Adelaide commercial plumbing: a backflow device, a grease trap, and reports and repairs

Installing a backflow device in Adelaide

A backflow prevention device, supplied and installed, is $520–$2,150 in our Adelaide table, and testing the first device $130–$280; the device and its first test come to $1,240 at the typical prices.

A grease trap in Adelaide

A grease trap, supplied and installed, is $4,325–$10,400 in our Adelaide table, and a service or pump-out $215–$560; four pump-outs come to $1,380 at the typical price.

Plumbing reports and repairs in Adelaide

Our Adelaide table has no row for a written plumbing report, so we don't publish one. For repairs, a commercial plumber is $88–$145 an hour; drain jetting is $260–$1,025 a job and a CCTV drain inspection $215–$775 a job.

These answers use the prices in the table on this page.

What Affects Commercial Plumbing Costs in Adelaide

Adelaide commercial plumbing is shaped by hard water, reactive clay soils and an older pipe network under the CBD and inner suburbs. Work ranges from backflow testing and plumbing reports for offices and shops on Rundle Street and The Parade in Norwood, to hospitality on Jetty Road in Glenelg and industrial plumbing in Wingfield, Regency Park and Lonsdale.

How to Control Commercial Plumbing Costs in Adelaide

In Adelaide, most avoidable commercial plumbing spend comes from moving clay and hard water: old earthenware sewers crack as the ground dries, and scale shortens the life of valves and heaters. Work timed around those two pressures, and around each business's busy season, costs least.

What a Compliant Commercial Plumbing Quote Includes — Cost in Adelaide

An Adelaide commercial plumbing quote should make plain how many devices, valves and drain lines it covers, what happens if old clay or cast-iron pipe turns out to be broken, and whether travel to the outer metro area is in the price, before any two figures are compared.

Commercial Plumbing compliance & service frequencies

Read this table against your type of Adelaide site. A Glenelg cafe or a Gouger Street kitchen will care most about the grease trap row, hospitals and labs on North Terrace carry long TMV lists, and northern manufacturing sites hold the backflow devices. The Basis column tells the lines apart: backflow and trap servicing name a body or agreement that sets them, while the hot water check is recommended practice.

ItemFrequencyBasis
Registered testable backflow devices (RPZ, double-check)Tested once a year by a licensed plumber; report to the OTR within 7 daysRegulator requirement: Office of the Technical Regulator (SA)
TMVs in care, education & food settingsTest and service on the valve's maintenance schedule (ask the plumber to state the interval)Standard: AS 4032.3 sets the minimum field-testing and maintenance requirements
Grease trap pump-out & serviceAs set in your trade waste agreementStatutory basis: trade waste agreement with the water authority
Hot water plant inspectionAnnualRecommended practice (manufacturer cadence)

The Adelaide backflow row is a once-a-year test, with a report to the OTR. A site with two devices on one visit pays $130–$280 for the first plus $76–$130 for the second, so $206–$410 each year. When this goes to tender, ask every bidder to show that test as its own yearly line, kept apart from repair labour at $88–$145 an hour.

Commercial plumbing cost in Adelaide: installation, repair and backflow work priced

Commercial plumbing in Adelaide is mostly priced two ways: by the hour for repairs and fault-finding, and as a fixed job price for installs and servicing. The commercial hourly rate here runs $88–$145 an hour with $105 typical. Installing a backflow prevention device costs $520–$2,150 for the job (typically $1,050), and a new grease trap supply and install sits at $4,325–$10,400 with $6,900 the usual figure.

Repair work in older parts of the city behaves differently from new fit-outs. Older shopfronts along Rundle Street, The Parade in Norwood and King William Road in Unley may still drain through ageing clay pipe, so a blocked line can need a CCTV drain inspection ($215–$775 per job) before anyone commits to digging. Drain jetting to clear roots and fat runs $260–$1,025 per job, around $475 in most cases. Industrial sites in Wingfield, Regency Park and Lonsdale often bundle several tasks into one booking, which spreads the call-out time across more work.

Backflow testing is a recurring cost rather than a one-off: the first device on site is $130–$280 per job and each additional device $76–$130 per device. Thermostatic mixing valves in aged care, childcare and medical suites add $120–$240 per valve for their yearly test and service. A sound Adelaide commercial plumbing quote should list each device or valve by location, the hourly rate and minimum charge for any repair time, and whether camera footage and test tags are handed over at the end.

Commercial plumbing cost by job size in Adelaide

Quick answerJob size in Adelaide is mostly a device count or an hour count: the first backflow device tested is $130–$280, and labour runs $88–$145 an hour, so a bigger site simply stacks more devices or more hours onto the same base.

Adelaide backflow rounds scale by the device. The first device on a visit is $130–$280, and each one after it on the same site is $76–$130 a device, so a Norwood medical suite with four testable devices comes to $358–$670 for the round. Valve work at a Burnside aged-care home grows the same way, valve by valve at $120–$240 a valve, while a long drain fault is priced by the hour.

What moves an Adelaide job of a given size is mostly what is under the ground. Earthenware sewers beneath the older shopfronts of Unley and North Adelaide crack as the clay dries each summer, so a jetting job at $260–$1,025 often grows into a camera inspection at $215–$775 to find the break. Hard water adds scale to valves, which lengthens a service, and Glenelg hospitality sites that can only be shut after close push labour into evening hours.

Frequently Asked Questions — Commercial Plumbing Cost in Adelaide

What do commercial plumbers charge in Adelaide?
In our Adelaide table the figures are $88–$145 an hour for the commercial hourly rate (typically $105), $130–$280 for a backflow test (first device) (typically $190) and $215–$560 for a grease trap service or pump-out (typically $345).
Is backflow testing mandatory?
Yes, if the device is testable: a plumbing advisory note issued by South Australia's Office of the Technical Regulator on 19 March 2026 says each testable backflow prevention device has to be tested once a year by a licensed plumber. Book every testable device on the site into one visit, since the first costs $130–$280 per job and each one after it $76–$130 per device.
What is a TMV and why does it need servicing?
Put simply, a TMV (thermostatic mixing valve) brings hot and cold water together and sends a steady warm mix, at a fixed temperature, to hand basins and showers. Nursing homes, hospitals, primary schools and kindergartens all tend to have them. Inside, the cartridge, seals and strainers wear or block up, and the outlet temperature wanders from where it was set, which is what a service attends to. In Adelaide one test and service costs $120–$240 per valve.
How much does backflow testing cost in Adelaide?
In our Adelaide table: testing the first device $130–$280, each additional device $76–$130 a device and supplying and installing a backflow device $520–$2,150.
What is the going hourly rate for a commercial plumber in Adelaide?
Per hour, our Adelaide table shows $88–$145 for a commercial plumber, typically $105.
What does installing a backflow prevention device cost in Adelaide?
Supplying and installing a backflow prevention device in Adelaide costs $520–$2,150 per job, with $1,050 per job typical. Small devices on a cafe or office water service sit at the lower end, while larger assemblies on fire, irrigation or process lines at Wingfield or Regency Park factories cost more. Testing is priced separately, from $130–$280 per job for the first device. Ask whether isolation valves, fittings and any pipe changes are included in the price.
How much does a CCTV drain inspection and report cost in Adelaide?
A CCTV drain inspection in Adelaide costs $215–$775 per job, with $390 per job typical. The camera shows cracks, root intrusion and dropped joints, which older clay sewer lines in suburbs such as Unley, Norwood and Burnside are prone to as the soil moves. Ask whether the price includes recorded footage and a written report you can pass to a landlord or insurer. If the line is simply blocked, drain jetting at $260–$1,025 per job may be quoted alongside.
How much does a commercial grease trap installation cost in Adelaide?
Supplying and installing a grease trap for an Adelaide food business costs $4,325–$10,400 per job, with $6,900 typical. Trap size, whether it goes in-ground or under a bench, and the distance to the sewer connection set most of the price. Fit-outs inside existing tenancies on Rundle Street or Jetty Road often involve cutting and reinstating concrete floors, which pushes a job up the range, so ask for excavation and making good to be priced as separate lines.
How does backflow lodgement work in Adelaide?
SA's Office of the Technical Regulator requires backflow device test reports, including annual tests, to be completed by a licensed plumber with backflow prevention accreditation and sent to it within seven days - a compliant Adelaide quote names lodgement, not just the test.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage