Data Cabling Cost Australia 2026
Data cabling in Australia is priced per point. A first Cat6 data point installed costs $150–$400, each additional point on the same visit $90–$250, a Cat6A point $150–$550 and an office fit-out point at volume, 20 or more points run back to a patch panel, $180–$400 per point. The run length, the ceiling or wall access and the cable grade are what move a point between the low and the high.
Around the points sit the pieces that make a network: a patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800, a network switch supplied and fitted at $100–$900, and a wireless access point cabled and mounted at $150–$650 with the unit itself shown separately. Fibre between buildings or floors is $300–$1,000 for a run installed and terminated and $60–$220 per core terminated or spliced.
The small lines finish the quote: a phone, NBN or data point relocated at $150–$500, cable certification testing and the report at $12–$100 per point, a registered cabler's hourly rate of $80–$160 for work that is not priced per point, and a call-out of $80–$200 where the installer charges one. Prices are as published by installers; the GST basis varies by installer. The bands on this page are national; each city guide below carries the same bands with that city's own year-on-year movement and local notes.
| City | Cat6 data point, installed | Year on year |
|---|---|---|
| Sydney | $150-$400 | ↑ +4.8% |
| Melbourne | $150-$400 | ↑ +4.6% |
| Brisbane | $150-$400 | ↑ +4.9% |
| Perth | $150-$400 | ↑ +4.2% |
| Adelaide | $150-$400 | ↑ +5.3% |
| Gold Coast | $150-$400 | ↑ +4.9% |
| Canberra | $150-$400 | ↑ +4.7% |
| Hobart | $150-$400 | ↑ +4.7% |
| Darwin | $150-$400 | ↑ +4.7% |
| Newcastle | $150-$400 | ↑ +4.8% |
| Geelong | $150-$400 | ↑ +4.6% |
| Sunshine Coast | $150-$400 | ↑ +4.9% |
| Wollongong | $150-$400 | ↑ +4.8% |
| Townsville | $150-$400 | ↑ +4.9% |
| Byron Bay | $150-$400 | ↑ +4.8% |
| Central Coast | $150-$400 | ↑ +4.8% |
| Cairns | $150-$400 | ↑ +4.9% |
Data Cabling Cost by City — Australia
Data Cabling Prices in Australia 2026: Cost Table and Price List
| Service | Low | Typical | High |
|---|---|---|---|
| Cat6 data point, installed (first point) | $150per point | $250 | $400 |
| Additional data point, same visit | $90per point | $150 | $250 |
| Cat6A data point, installed | $150per point | $300 | $550 |
| Office fit-out data point at volume (20+ points, run to patch panel) | $180per point | $250 | $400 |
| Fibre optic run, installed and terminated | $300per job | $450 | $1,000 |
| Fibre core termination or fusion splice | $60per unit | $110 | $220 |
| Patch panel supplied and terminated (12-24 port) | $200per panel | $400 | $800 |
| Wall-mount comms cabinet supplied and installed (6-12RU) | $380per unit | $900 | $1,800 |
| Wireless access point install (cable run and mount, unit excluded) | $150per point | $300 | $650 |
| NBN, phone or data point relocation | $150per job | $300 | $500 |
| Cable certification test and report | $12per point | $35 | $100 |
| Network switch supplied and fitted | $100per switch | $350 | $900 |
| Registered cabler hourly rate | $80per hour | $112 | $160 |
| Call-out or minimum attendance, where charged | $80per visit | $150 | $200 |
Scoping data cabling work? Get a quote from a commercial contractor - free, no obligation.
Get free quotes →Prices are as published by installers; the GST basis varies by installer. National figures, November 2026.
Worked Data Cabling Cost Scenarios — Australia
Three examples priced from the national rows above. Each line names the row it draws on; the quote you receive prices your own point count, runs and access.
- Shop or clinic adding points. A tenancy that needs a few more outlets pays $150–$400 for the first Cat6 point ($250 typical) and $90–$250 for each additional point on the same visit, with an old phone or NBN point relocated at $150–$500 and no call-out where the installer prices per point, or $80–$200 where it does.
- Office floor fit-out. A floor of workstations is cabled at $180–$400 per point for 20 or more points run to a patch panel at $200–$800, housed in a wall-mount comms cabinet at $380–$1,800 with a network switch at $100–$900, Wi-Fi access points cabled and mounted at $150–$650 each, and every point certified at $12–$100.
- Warehouse with a second building. A fibre run between the office and the warehouse is installed and terminated at $300–$1,000 with each core at $60–$220, Cat6A points at $150–$550 serve the high-throughput dock scanners, and the long runs through the racking are charged at the registered cabler's hourly rate of $80–$160.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping data cabling work? Get a quote from a commercial contractor - free, no obligation.
Get free quotes →Data Cabling Costs by Sector — Australia
Sector sets the point count and the cable grade, and the building sets the runs and the access.
- Offices and co-working - Fit-out points at $180–$400 per point run to a patch panel at $200–$800, a comms cabinet at $380–$1,800, a switch at $100–$900 and Wi-Fi access points at $150–$650 per point, with certification at $12–$100 per point.
- Medical, dental and allied health - Cat6A points at $150–$550 for imaging and practice systems, additional points at $90–$250 in consulting rooms, and relocations at $150–$500 when a room changes use.
- Retail and hospitality - A first point at $150–$400 for the POS and $90–$250 for each additional point, a Wi-Fi access point for guests at $150–$650, and a call-out at $80–$200 where the installer charges one for a single-point visit.
- Schools and campuses - Volume points at $180–$400 per point across classrooms, fibre between buildings at $300–$1,000 per run and $60–$220 per core, and switches at $100–$900 in each comms cabinet at $380–$1,800.
- Warehouses and industrial - Cat6A points at $150–$550 for scanners and dock systems, long runs through racking at the hourly rate of $80–$160, and Wi-Fi access points at $150–$650 per point to cover the floor.
What a Compliant Data Cabling Quote Includes — Cost in Australia
Before comparing quotes, check each one prices the same number of points at the same cable grade, says whether the patch panel, cabinet, switch and certification are in or out, names the cabler's registration, and shows the GST basis on every line.
- The point count and cable grade - Cat6 at $150–$400 for the first point and $90–$250 for each additional point, or Cat6A at $150–$550 per point - with the run length and ceiling or wall access described
- Office fit-outs priced per point at volume, $180–$400 per point for 20 or more points run to a patch panel, with the volume break stated
- The patch panel at $200–$800 and the wall-mount comms cabinet at $380–$1,800 as their own lines, with port and rack-unit counts
- Network switches at $100–$900 supplied and fitted, with the make and whether it is managed or unmanaged
- Wi-Fi access points cabled and mounted at $150–$650 per point, with the unit itself shown separately
- Fibre runs at $300–$1,000 installed and terminated and fibre cores at $60–$220 each, with the fibre type and connector named
- Cable certification testing and the report at $12–$100 per point, or a nil line where it is included in the point price
- The cabler's ACMA registration kind - open, restricted or lift - and the completion statement that the work complies with the Wiring Rules
- A single GST basis across every line, the call-out at $80–$200 where charged, and the cabler's ABN and insurance
Data cabling cost in Australia: points, panels, fibre and the registered cabler
Data cabling cost in Australia comes in three parts: the points, the hardware they run to, and the cabler's time. Points are $150–$400 for a first Cat6 point installed (typically $250), $90–$250 for each additional point on the same visit, $150–$550 for Cat6A and $180–$400 per point at fit-out volume. Hardware is the patch panel at $200–$800, the comms cabinet at $380–$1,800 and the switch at $100–$900.
Time and testing sit around them: a registered cabler's hourly rate of $80–$160 for runs that cannot be priced per point, a call-out of $80–$200 where charged, certification at $12–$100 per point, a relocation at $150–$500, Wi-Fi access points at $150–$650 per point, and fibre at $300–$1,000 per run with $60–$220 per core.
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Ask the installer to show the registration number and the completion statement on the quote, and to say whether certification is a separate line or inside the point price.
Data cabling cost by point count and cable grade in Australia
Count moves the price in one direction: the first point carries the set-up and sits at $150–$400, each additional point on the same visit drops to $90–$250, and a fit-out of 20 or more points run to a patch panel drops again to $180–$400 per point. The patch panel at $200–$800 and the cabinet at $380–$1,800 are fixed lines that spread across the count.
Grade and distance move it the other way. A Cat6A point at $150–$550 costs more than Cat6 for the heavier cable and connectors; a fibre run at $300–$1,000 with cores at $60–$220 replaces copper once the distance or the throughput calls for it; and a long run through racking, ceilings or a heritage wall is charged at the hourly rate of $80–$160 instead of per point.
Data cabling cost in Australia: what the jobs are priced at
Data cabling anywhere in the country starts with the same short list of lines; what shifts the number is the point count, the cable grade, the run length and how the cabler gets into the ceiling. Older buildings and heritage shopfronts add time to every run; new fit-outs with open ceilings mostly need a count and a date.
- Points: $150–$400 for a first Cat6 data point installed, with $250 typical; $90–$250 for each additional point on the same visit; $150–$550 for a Cat6A point; $180–$400 per point on an office fit-out of 20 or more points run to a patch panel.
- Panels, cabinets and switches: $200–$800 for a patch panel supplied and terminated; $380–$1,800 for a wall-mount comms cabinet supplied and installed; $100–$900 for a network switch supplied and fitted.
- Fibre: $300–$1,000 for a fibre optic run installed and terminated; $60–$220 per fibre core terminated or fusion spliced.
- Wi-Fi and relocations: $150–$650 per point for a wireless access point cabled and mounted, unit excluded; $150–$500 for an NBN, phone or data point relocated.
- Testing: $12–$100 per point for cable certification testing and the report.
- Time and attendance: $80–$160 per hour for a registered cabler; $80–$200 for a call-out or minimum attendance where the installer charges one.