Updated November 2026·Independently researched·10 min read
Data cabling in Perth runs $150–$400 per point
for a Cat6 data point installed, as published by installers - additional points, Cat6A, fibre, patch panels and cabinets below
A first Cat6 data point installed in Perth is published at $150–$400, $250 typical, with $90–$250 for each additional point on the same visit. A West Perth consultancy cabling its whole floor to a patch panel pays $180–$400 per point at volume; a Rokeby Road Subiaco GP clinic that needs the NBN point brought through to the practice manager's office pays $150–$500.
+4.2%Data Cabling costs in Perth are up around 4.2% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical Cat6 data point in Perth
$250
per point installed, Perth 2026, as published
Cat6 data point, installed (first point)
$150-$400
Additional data point, same visit
$90-$250
Office fit-out data point at volume (20+ points, run to patch panel)
$180-$400
$150$250$400
Perth data cabling is quoted per point with the hardware on separate lines. Points run $150–$400 for the first Cat6 data point installed, $90–$250 for each additional point on the same visit, $150–$550 for a Cat6A point and $180–$400 per point once an office fit-out passes 20 points run to a patch panel. Hardware runs $200–$800 for a patch panel supplied and terminated, $380–$1,800 for a wall-mount comms cabinet and $100–$900 for a network switch supplied and fitted; several Perth installers advertise no call-out fee on fixed per-point pricing.
Where a Perth point lands inside its band comes down to the building. A CBD or Elizabeth Quay tower floor with a ceiling grid and a riser is a quick pull; a double-brick shop on Beaufort Street Mount Lawley or a Subiaco federation cottage turned clinic means chasing or surface conduit on solid walls and a roof space under a tiled roof, and those points sit toward the top of $150–$400. In a Welshpool or Kewdale shed the run climbs to the purlins, and each Wi-Fi access point cabled and mounted at $150–$650 carries a lift line.
The remaining lines are the ones that decide whether two quotes are comparable. Cable certification and the report at $12–$100 per point is inside the point price for some Perth installers and billed by others; a fibre optic run at $300–$1,000 installed and terminated carries an Osborne Park link between a showroom and the warehouse behind it, with each core terminated or fusion spliced at $60–$220; and the hourly rate of $80–$160, with a call-out of $80–$200 where charged, prices the tracing and fault-finding on an inherited network.
Quick answerData cabling in Perth runs $150–$400 per point for a first Cat6 data point installed in 2026, $90–$250 per point for each additional point on the same visit and $180–$400 per point on an office fit-out of 20 or more points run to a patch panel. Cat6A points cost $150–$550, a patch panel $200–$800 and a wall-mount comms cabinet $380–$1,800. Prices are as published by installers; the GST basis varies. Get free Perth quotes →
Data Cabling Prices in Perth 2026: Cost Table and Price List
Service
Low
Typical
High
Cat6 data point, installed (first point)
$150per point
$250
$400
Additional data point, same visit
$90per point
$150
$250
Cat6A data point, installed
$150per point
$300
$550
Office fit-out data point at volume (20+ points, run to patch panel)
$180per point
$250
$400
Fibre optic run, installed and terminated
$300per job
$450
$1,000
Fibre core termination or fusion splice
$60per unit
$110
$220
Patch panel supplied and terminated (12-24 port)
$200per panel
$400
$800
Wall-mount comms cabinet supplied and installed (6-12RU)
$380per unit
$900
$1,800
Wireless access point install (cable run and mount, unit excluded)
$150per point
$300
$650
NBN, phone or data point relocation
$150per job
$300
$500
Cable certification test and report
$12per point
$35
$100
Network switch supplied and fitted
$100per switch
$350
$900
Registered cabler hourly rate
$80per hour
$112
$160
Call-out or minimum attendance, where charged
$80per visit
$150
$200
Scoping data cabling work in Perth? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Perth metro, November 2026.
What does a data point cost in Perth?$150–$400 per point for a first Cat6 point installed, $250 typical. Each additional point on the same visit costs $90–$250, a Cat6A point $150–$550, and an office fit-out point at volume $180–$400 per point.
What gets added to a Perth data cabling quote?A patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800, a network switch at $100–$900, a Wi-Fi access point cabled and mounted at $150–$650, cable certification at $12–$100 per point, and a call-out of $80–$200 where the installer charges one.
Worked Data Cabling Cost Scenarios — Perth
Perth examples priced from this page's rows: a West Perth engineering consultancy, a Rokeby Road Subiaco GP clinic and a Kewdale transport yard. Each line names its row; your quote prices your own walls, roof space and run lengths.
West Perth engineering consultancy. An engineering consultancy taking a West Perth floor cables its desks at $180–$400 per point, typically $250, runs Cat6A at $150–$550 to the plotter room and the uplinks, lands it all on a patch panel at $200–$800 inside a wall-mount cabinet at $380–$1,800, fits a managed switch at $100–$900, cables ceiling access points at $150–$650 each with the units separate, and has every point certified at $12–$100 so the report goes into the lease file.
Rokeby Road Subiaco GP clinic. A general practice opening in a Rokeby Road cottage needs reception and each consulting room cabled, priced at $150–$400 for the first point and $90–$250 for each after it on the same visit, has the NBN point relocated from the front room to the practice manager's office at $150–$500, and adds one access point at $150–$650 for the waiting room; the installer works on fixed per-point pricing with no $80–$200 call-out line.
Kewdale transport yard. A transport company with no coverage in the back half of its Kewdale shed has a fibre optic run installed and terminated at $300–$1,000 from the office cabinet to a second cabinet at the far wall, with cores at $60–$220 each, access points cabled and mounted along the racking at $150–$650 per point, and a morning at the registered cabler's hourly rate of $80–$160 to trace and label the runs left by the last tenant.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping data cabling work in Perth? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Perth metro, November 2026.
Data Cabling Costs by Sector in Perth
Perth's data cabling work runs from CBD, Hay Street Mall and Elizabeth Quay tower floors and the offices of West Perth, Osborne Park and Joondalup, through the clinics and shops of Rokeby Road Subiaco, Beaufort Street Mount Lawley and Oxford Street Leederville, to the sheds of Welshpool, Kewdale, Malaga and Canning Vale and the venues of Northbridge, Fremantle and Scarborough.
Consultancy floors: West Perth, Osborne Park, Joondalup - Fit-outs past 20 points run to a patch panel at $180–$400 per point, Cat6A at $150–$550 for the uplinks, a patch panel at $200–$800, a cabinet at $380–$1,800, a switch at $100–$900 and certification at $12–$100 per point for the lease file.
GP and specialist rooms: Subiaco, Mount Lawley, Cottesloe - A first point at $150–$400 and additional points at $90–$250 across the consulting rooms, a relocation at $150–$500 where the practice inherits the previous tenant's NBN position, and double-brick walls priced for the chasing or conduit they need.
Transport yards and workshops: Welshpool, Kewdale, Malaga, Canning Vale - Access points cabled and mounted at $150–$650 each along the racking, a fibre optic run at $300–$1,000 from the office to the far wall with cores at $60–$220 each, and a lift line for the purlin height.
Centres and venues: Karrinyup, Garden City Booragoon, Northbridge, Fremantle - A POS point and a back-office point at $150–$400 then $90–$250, an access point at $150–$650 for the floor, and centre or venue after-hours access priced at the hourly rate of $80–$160.
Shopfronts: Leederville, Hay Street Mall, Scarborough - Older frontages where a single run from the NBN box to the counter is $150–$500, a first point sits toward the top of $150–$400 and the call-out of $80–$200 applies only where the installer charges one.
What a Compliant Data Cabling Quote Includes — Cost in Perth
Before comparing Perth quotes, check each one prices the same number of points at the same cable grade, says whether the patch panel, cabinet, switch and certification are in or out, names the cabler's registration, and shows the GST basis on every line.
The point count and cable grade - Cat6 at $150–$400 for the first point and $90–$250 for each additional point, or Cat6A at $150–$550 per point - with the run length and ceiling or wall access described
Office fit-outs priced per point at volume, $180–$400 per point for 20 or more points run to a patch panel, with the volume break stated
The patch panel at $200–$800 and the wall-mount comms cabinet at $380–$1,800 as their own lines, with port and rack-unit counts
Network switches at $100–$900 supplied and fitted, with the make and whether it is managed or unmanaged
Wi-Fi access points cabled and mounted at $150–$650 per point, with the unit itself shown separately
Fibre runs at $300–$1,000 installed and terminated and fibre cores at $60–$220 each, with the fibre type and connector named
Cable certification testing and the report at $12–$100 per point, or a nil line where it is included in the point price
The cabler's ACMA registration kind - open, restricted or lift - and the completion statement that the work complies with the Wiring Rules
A single GST basis across every line, the call-out at $80–$200 where charged, and the cabler's ABN and insurance
Data cabling cost in Perth: consultancies, clinics and transport sheds
Data cabling cost in Perth starts at $150–$400 for a first Cat6 data point installed (typically $250) and $90–$250 for each additional point on the same visit, and settles at $180–$400 per point once a fit-out passes 20 points run to a patch panel. Cat6A, the grade rated for 10 gigabit links, is $150–$550 per point; a fibre optic run is $300–$1,000 installed and terminated with cores at $60–$220 each.
The building decides the rest of a Perth quote. An Elizabeth Quay or CBD floor with a riser and a ceiling grid keeps runs short; a Mount Lawley or Subiaco double-brick building means chasing, conduit and a tiled roof space; a Malaga or Canning Vale shed means height. Around the points sit the patch panel at $200–$800, the comms cabinet at $380–$1,800, the switch at $100–$900, access points at $150–$650 each with the units separate, certification at $12–$100 per point, and a call-out of $80–$200 where one is charged.
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Ask the Perth installer to show the registration kind on the quote and to hand over the completion statement with the certification report before the final invoice.
Data cabling cost by point count and cable grade in Perth
Quick answerPerth pricing steps by point count: an Oxford Street Leederville shop or a Cottesloe suite sits in the $150–$400 first-point and $90–$250 additional-point bracket, a West Perth or Joondalup floor lands at $180–$400 per point once it passes 20 points to a patch panel, and a Welshpool shed adds $150–$650 per access point and $300–$1,000 per fibre run to reach the far wall.
Point count is the first thing a Perth quote responds to. The first point carries the visit and the set-up at $150–$400; every point after it on the same day is $90–$250; and past 20 points run to a patch panel the price settles at $180–$400 per point, which is where an Osborne Park or West Perth floor sits. Grade stacks on top: Cat6A at $150–$550 for the uplinks and the plotter or imaging room against Cat6 for the desks, with certification at $12–$100 per point either inside the point price or on its own line.
Distance and height come second. An access point on the purlins of a Kewdale or Canning Vale shed is $150–$650 to cable and mount before the unit, and a fibre optic run at $300–$1,000 with cores at $60–$220 each takes over where copper cannot reach. The hardware scales with the count: a patch panel at $200–$800 and a cabinet at $380–$1,800 for a floor, a switch at $100–$900, and for one point moved in a Fremantle cafe only the relocation at $150–$500 plus, where charged, the call-out of $80–$200.
Frequently Asked Questions — Data Cabling Cost in Perth
What is the price of data cabling in Perth?
From our Perth table: $150–$400 per point for a first Cat6 data point installed (typically $250); $90–$250 per point for each additional point on the same visit (typically $150); $180–$400 per point on an office fit-out of 20 or more points (typically $250).
How much does a single data point cost in Perth?
A first Cat6 data point installed costs $150–$400 in Perth, with $250 typical, and each additional point on the same visit $90–$250. A Beaufort Street Mount Lawley or Rokeby Road Subiaco double-brick building with solid walls and a long run to the NBN box sits toward the top of that band; an Elizabeth Quay floor with a ceiling grid sits toward the bottom, and the call-out of $80–$200 applies only where the installer charges one.
What does an office fit-out data cabling job cost per point in Perth?
Going by our Perth table, an office fit-out point at volume - 20 or more points run to a patch panel - costs $180–$400 per point, typically $250, with the patch panel at $200–$800 and the comms cabinet at $380–$1,800 on their own lines. West Perth, Osborne Park and Joondalup tenants are the usual Perth buyers, and the quote should show the switch at $100–$900, the access points at $150–$650 each and certification at $12–$100 per point as their own lines.
How much more is Cat6A than Cat6 in Perth?
A Cat6A data point installed costs $150–$550 on our Perth table, with $300 typical, against $150–$400 for a first Cat6 point; Cat6A is the grade rated for 10 gigabit links.
Do I need a registered cabler in Perth?
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. In Perth ask for the registration kind on the quote and the completion statement with the test report at handover, and keep both with the lease file for the make-good at the end of the term.
What does a Perth data cabler charge per hour?
A registered cabler's hourly rate is $80–$160 on our Perth table, with $112 typical, and a call-out or minimum attendance of $80–$200 applies where the installer charges one; several installers advertise no call-out fee with fixed per-point pricing.
What does fibre cabling cost in Perth?
A fibre optic run installed and terminated costs $300–$1,000 in Perth, with $450 typical, and each fibre core terminated or fusion spliced $60–$220. Perth fibre work is mostly showroom-to-warehouse and shed runs - an Osborne Park showroom to the store behind it, or the far wall of a Malaga workshop - and the quote should name the fibre type, the connector and whether cores are terminated or fusion spliced.
What do Wi-Fi access points and switches cost to install in Perth?
A wireless access point cabled and mounted costs $150–$650 per point in Perth with the unit itself excluded, and a network switch supplied and fitted $100–$900. Welshpool and Kewdale sheds and Northbridge venues are the usual Perth buyers of access point cabling, and the quote should show the unit, the mount height and any lift separately, with the hourly rate of $80–$160 covering anything outside the fixed price.
Is cable certification included in a Perth data cabling quote?
Cable certification testing and the report costs $12–$100 per point on our Perth table, with $35 typical, and several installers include it in the point price - the quote should say which. Under the Telecommunications (Cabling Provider) Rules 2025 the cabler must hold the right kind of registration - lift, open or restricted - or work under a supervisor who accepts full responsibility, and must give the customer a completion statement that the work complies fully with the Wiring Rules and keep a copy for at least one year. A Perth fit-out usually bundles the certification with the patch panel at $200–$800; ask for the report by port number so it matches the panel labels.