How much does commercial electrician cost in Perth?
Perth commercial electricians work at $100–$135 an hour, with a call-out of $150–$250 taking care of the first hour. On fit-outs the total is set more by the scope than the rate, and work timed around a centre's closing hours or a builder's program sits toward the upper end.
Perth's commercial market stretches along a long coastal strip: head offices and resources firms in the CBD and West Perth, retail and hospitality in Subiaco, Mount Lawley and Fremantle, industrial estates at Welshpool, Kewdale and Malaga, and heavy industry and marine work at Kwinana and Henderson to the south. Jobs at the far ends of the metro area often carry travel time on top of the hourly rate.
On a typical tenancy job, data cabling is quoted at $150–$395 per point and a three-phase board upgrade comes to $2,000–$5,950 per job. EV chargers for staff parking cost $2,475–$7,850 per charger, while emergency and exit lights are checked for $7.85–$20 per fitting.
Commercial Electrician Prices in Perth 2026: Cost Table, Price List and Hourly Rates
| Service | Low | Typical | High |
|---|---|---|---|
| Hourly rate, commercial | $100per hour | $120 | $135 |
| Call-out (first hour included) | $150per job | $185 | $250 |
| Test & tag | $2.47per item | $4.93 | $9.13 |
| Emergency/exit light test | $7.85per fitting | $14 | $20 |
| Switchboard upgrade, 3-phase | $2,000per job | $3,475 | $5,950 |
| LED high-bay replacement | $245per fitting | $325 | $640 |
| Data cabling | $150per point | $245 | $395 |
| EV charger install, commercial | $2,475per charger | $4,475 | $7,850 |
Scoping commercial electrician work in Perth? Get a quote from a local commercial contractor - free, no obligation.
Get Perth quotes →Prices include GST. Perth metro, November 2026.
Worked Commercial Electrician Cost Scenarios — Perth
Perth commercial jobs lean on office and shop fit-outs, heat-loaded boards and large industrial estates. These three examples price a West Perth office fit-out, a Fremantle limestone shopfront and a Welshpool warehouse, worked from the rates in the table.
- West Perth office fit-out, data and tagging. A mining services firm fitting out a West Perth floor needs 40 data points and has 150 new items to tag before move-in. 40 points at the typical $245 per point is about $9,800, and 150 items at $4.93 per item adds about $740, for roughly $10,540 together.
- Fremantle limestone shopfront, gelato bar board. A gelato bar moving into a limestone shopfront in Fremantle brings display freezers and a batch freezer the old board cannot run. The 3-phase switchboard upgrade at the typical $3,475 per job, plus 6 hours at $120 per hour surface-running new circuits along the thick walls, totals about $4,195.
- Welshpool warehouse relight with a platform. A Welshpool warehouse replaces 26 high-bays over its racking. At the typical $325 per fitting the relight comes to about $8,450. If an elevating work platform has to be brought in and moved aisle by aisle in summer heat, budget toward the top of the $245–$640 per fitting band, near $16,640.
You're in.
A local contractor will be in touch about your job. No spam, no call centre.
Scoping commercial electrician work in Perth? Get a quote from a local commercial contractor - free, no obligation.
Get Perth quotes →Prices include GST. Perth metro, November 2026.
Commercial Electrician Costs by Sector in Perth
Resources and distance shape Perth's commercial electrical work: mining services yards in Kewdale and Welshpool, shipbuilding at Henderson and processing plants at Kwinana, medical precincts at Nedlands and Murdoch, two big university campuses, and freight sheds near the airport and in Malaga.
- Mining services yards in Kewdale - Tools and leads headed for remote sites are often tagged in the yard before they ship, so whole racks of gear are done at once, at $2.47–$9.13 per item.
- Henderson shipyards and Kwinana plants - Fabricators and engineering shops supplying the shipyards and processing plants add welders and machining centres, and a three-phase board upgrade for that load runs $2,000–$5,950 per job.
- Nedlands and Murdoch medical precincts - Specialist suites, labs and imaging clinics around the two major hospital campuses need data to every room, typically $150–$395 per point, with dedicated circuits for equipment.
- UWA and Curtin campuses - Lecture buildings, labs and residences at Crawley and Bentley carry long runs of exit and emergency fittings, tested at $7.85–$20 per fitting between semesters.
- Airport freight and Malaga sheds - Freight forwarders near the airport and warehouses in Malaga relight under tall roofs, with LED high-bay replacement at $245–$640 per fitting depending on platform hire.
What Perth Commercial Electrician Jobs Actually Cost
Newer sheds and office floors with open ceilings and spare board capacity are where Perth jobs price lowest. Prices climb in summer heat, when roof-space work slows, in limestone or older inner-city buildings where cable is hard to hide, and on trips from one end of the long metro area to the other. Travel on those trips is often billed at the $100–$135 an hour labour rate, on top of a call-out at $150–$250 per job.
Ask whether the quote assumes a contractor working your side of the river, and how travel is counted. For fit-outs, get the point and fitting counts agreed against the drawings before work starts, and for yard tagging, ask for a per-item price that holds for every return visit.
What Affects Commercial Electrician Costs in Perth
Perth commercial electrical work covers CBD and West Perth office towers, shop and office fit-outs in Subiaco, Mount Lawley and North Perth, limestone heritage buildings in Fremantle, and industrial estates such as Welshpool, Kewdale and Malaga. Long, hot summers, a sprawling metro area and resources-sector demand for skilled trades all shape where a job lands in the range.
- Office and shop fit-outs - New tenancies need lighting, power, data and switchboard changes coordinated with the builder. Data cabling typically runs $150–$395 per point, with the upper end for small counts or difficult ceiling access.
- Resources-sector competition - Electricians with industrial experience are sought after by mining and resources work, which can tighten availability for commercial jobs in busy periods and push rates up.
- Heat and cooling loads - Hot summers keep air-conditioning running hard, so older boards often have little spare capacity. Adding kitchen equipment or chargers may need a 3-phase upgrade, and roof-space work is slower in extreme heat.
- Fremantle heritage buildings - Limestone walls, high ceilings and old timber floors in Fremantle and older inner suburbs make concealed cabling slow. Owners often want new work kept discreet, which adds routing time.
- Metro travel - Perth spreads a long way along the coast and inland, so a contractor based south of the river servicing a northern site spends time on the freeway. Grouping maintenance visits keeps per-visit costs down.
- Platforms and access equipment - Warehouses and showrooms in Welshpool and Malaga need elevating work platforms for high-bay lighting and cabling. Hiring and transporting the platform is often itemised separately from the fitting rate.
How to Control Commercial Electrician Costs in Perth
In Perth, timing and labour supply drive electrical costs: work booked outside the hottest months runs at full speed, and booking industrial work well ahead avoids chasing scarce electricians when the resources sector is busy.
- Book roof-space cabling and high-bay relights between autumn and spring, when sheds in Welshpool or Malaga are cooler to work in.
- Fremantle and older inner-city buildings can use surface conduit on limestone walls where heritage controls allow it, which is quicker than chasing cable into the stone.
- Multi-site businesses can ask for one rate card covering every site from Joondalup to Rockingham, so each small job is not priced from scratch.
- Fit-outs in West Perth and the city can run data cabling before ceilings close, at $150–$395 per point, with power on the same visit, rather than adding points after move-in.
What a Compliant Commercial Electrician Quote Includes — Cost in Perth
A Perth quote should make the scope, the working window and the site conditions clear, so a quote that assumes easy daytime access is not set against one priced for after-hours work or an industrial site.
- For limestone and heritage buildings, whether surface conduit or concealed cabling is priced
- Elevating work platform hire, delivery and the number of days booked
- For Henderson, Kwinana or other industrial sites, induction and escort time
- Removal and recycling of old lamps and fittings
- Test results and circuit schedules at completion
- Licence number and insurance details
- GST treatment matching the other quotes
Commercial Electrician compliance & service frequencies
Perth's resources trade puts many sites on the shorter tagging cycles: Kewdale yards readying gear for remote sites and fabricators at Henderson fit the six-monthly workshop line, while offices in Subiaco sit on the yearly round. The last row names Building and Energy in its Basis and sets a deadline after new work for both the customer's certificate and, on notifiable work, a notice to the network operator.
| Item | Frequency | Basis |
|---|---|---|
| Test & tag - construction/demolition sites | Every 3 months | Basis: WHS regulations (regular testing of equipment used in hostile environments), with intervals by environment class from AS/NZS 3760 |
| Test & tag - factories/workshops | Every 6 months | Basis: WHS regulations (regular testing by a competent person), with intervals from AS/NZS 3760 |
| Test & tag - offices (low-risk hostile) | Every 12 months (up to 5 yrs in protected environments) | Basis: WHS regulations (regular testing by a competent person), with intervals from AS/NZS 3760 |
| Emergency & exit light test | Six-monthly, incl. duration test | Statutory basis: AS 2293.2 |
| RCD push-button testing (workplaces) | Per AS/NZS 3760 schedule | Basis: WHS regulations (regular testing by a competent person), with intervals from AS/NZS 3760 |
| Electrical Safety Certificate and Notice of Completion | Electrical Safety Certificate to the customer within 28 days of completion; for notifiable work, Notice of Completion to the network operator within 3 days | Statutory basis: Electricity (Licensing) Regulations 1991 (WA) regs 51, 52 and 52B under the Electricity Act 1945; Building and Energy |
A Kewdale yard tagging 300 tools and leads on the six-monthly line pays $1,479 a round at $4.93 an item, or $2,958 for the year. Fix the item count in the Perth tender documents, then compare bids on the rate alone; a bidder who rounds the count up is pricing work that is not there.
Commercial electrician cost in Perth for office and shop fit-outs
A commercial electrician in Perth charges $100–$135 an hour with $120 typical, and a call-out costs $150–$250 for the job including the first hour. For office and shop fit-outs, the main priced items are data cabling at $150–$395 per point, LED lighting such as high-bay replacement at $245–$640 per fitting, and a three-phase switchboard upgrade at $2,000–$5,950 for the job when the tenancy needs more capacity.
Office fit-outs in West Perth, Subiaco and the CBD usually involve new power and data to workstations, meeting room circuits and lighting changes, so the number of points drives most of the price. Shop fit-outs in Fremantle, Mount Lawley and North Perth focus on display lighting, signage circuits and point-of-sale power. Warehouses and showrooms in Osborne Park, Welshpool and Malaga often bundle LED high-bay upgrades with a board upgrade. Long, hot summers keep air conditioning loads high, a common reason older boards need replacing.
Test and tag costs $2.47–$9.13 per item, emergency or exit light testing is $7.85–$20 per fitting, and commercial EV chargers run $2,475–$7,850 per charger installed. A Perth fit-out electrical quote should state the number of power and data points, the fittings allowed for lighting, whether the work is coordinated with the builder or shopfitter, after-hours rates if the centre restricts working times, and test and tag of new equipment at handover.
Commercial electrician cost by job size in Perth
Fit-outs are the common Perth job, and they scale by the count of points. A West Perth or Subiaco office cabling 60 data points at $150–$395 a point comes to $9,000–$23,700, with the per-point figure easing when the ceiling is open and the comms room is on the same floor. The power side of the same fit-out is hourly, and once the included first hour in the call-out of $150–$250 is used, every hour of circuit work and board changes adds to the labour line.
Perth's distances and heat decide where a job of a given size settles. Industrial yards in Kewdale, Welshpool and Malaga are far from the western suburbs, so a single visit to Fremantle or Cottesloe from the eastern estates carries real driving time. Limestone heritage buildings in Fremantle slow cable runs, while new sheds in the eastern estates let a high-bay relight sit near $245 a fitting. Hot, dry summers load switchboards and air-conditioning circuits, so February brings more board faults and after-hours calls than winter.