Independent Australian Cost Guides
Updated November 2026
← Commercial Fitout across Australia

How much does a commercial fit-out cost in Perth?

A commercial fit-out in Perth is priced $365-$3,650/m2
per m² by specification - cat A, cat B, shopfitting and make-good priced separately
An East Perth office fit-out is priced in bands per m²: $365–$650 for cat A base building and $1,375–$2,275 for standard cat B tenant work, with $1,825 typical. Glazed partitioning is counted per linear metre at $460–$1,285, and end-of-lease make-good on the old premises at $70–$320 per m².
+3.8% Commercial fitout costs in Perth are up around 3.8% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Office Fit-Out in Perth
$1,825/m2
cat B, per m² supplied & installed
Cat A (base)
$365-$650/m2
Cat B (full)
$2,275-$3,650/m2
Premium / hospitality
$2,550-$4,100/m2
$365/m2$1,825/m2$3,650/m2

Perth commercial fit-outs come in at $365–$3,650 per m², the low end covering Cat A base-building work and the high end a premium Cat B office. Specification sets most of the spread, and access, program length and the condition of the existing tenancy set the rest.

Perth's fit-out work spans head offices and resources firms in the CBD and West Perth, professional suites in Subiaco and Leederville, heritage tenancies in Fremantle, and office pods inside warehouses at Osborne Park, Welshpool and Malaga. Large suburban shopping centres such as Karrinyup, Morley and Booragoon carry many retail fit-outs, each following centre design rules and after-hours work windows.

Clearing an old office back to base building runs $28–$135 per m², and new workstation modules cost $1,100–$4,650 per workstation. All prices include GST.

Quick answerA commercial fit-out in Perth is priced per square metre and varies widely by cat A vs cat B specification, services scope and finishes. Verified bands are $365-$3,650/m2. Get free Perth quotes →

Commercial Fitout Prices in Perth 2026: Cost Table and Price List

ServiceLowTypicalHigh
Fit-out feasibility / concept design$2,750per report$7,300$18,250
Cat A fit-out (base building)$365/m²$480$650
Cat B fit-out (tenant, standard)$1,375/m²$1,825$2,275
Cat B fit-out (full / premium)$2,275/m²$2,750$3,650
Retail shopfitting$915/m²$1,825$2,500
Hospitality fit-out (cafe / restaurant)$2,550/m²$3,375$4,100
Office partitioning (plasterboard)$110/m²$159$205
Glazed office partitioning$460/m$730$1,285
Suspended ceiling (supply + install)$46/m²$91$135
Office joinery package (kitchenette + reception counter + storage)$9,150per job$18,250$27,350
Services upgrade to existing base build (mechanical adjustment, power, data)$185/m²$275$410
End-of-lease make-good$70/m²$135$320
Workstation furniture module (desk, screen + storage, supply & install)$1,100per workstation$2,281$4,650
Office strip-out to base building (incl. disposal)$28/m²$55$135
Medical / healthcare suite fit-out (GP, specialist rooms, dental)$1,650/m²$2,425$3,200
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local contractor will be in touch about your job. No spam, no call centre.

Prices include GST. Perth metro, November 2026.

Commercial Fitout Costs by Sector in Perth

West Perth professional suites

$1,375–$2,275/m²

Accountants, engineers and mining service firms in West Perth's low-rise blocks mostly fit out on the standard tenant row at $1,375–$2,275 per m². Fixed offices around a central open area are typical, and western sun on older glazing often brings film or new blinds into scope.

Northbridge and Leederville hospitality

$2,550–$4,100/m²

Bars in Northbridge, cafes on Oxford Street in Leederville and restaurants in Fremantle are priced on the hospitality row at $2,550–$4,100 per m². Old warehouse buildings in Northbridge and Fremantle often need new drainage and stronger floors before a commercial kitchen can go in.

Medical rooms near Nedlands and Murdoch

$1,650–$3,200/m²

Specialist practices close to the Nedlands medical precinct and the Murdoch hospital campus are priced on the medical and healthcare suite row at $1,650–$3,200 per m². Basins in every room, extra circuits, nurse call wiring and seamless vinyl floors drive the cost.

Showrooms in Osborne Park and Malaga

$915–$2,500/m²

Showrooms and trade counters in Osborne Park and Malaga have no row of their own; the nearest priced item is retail shopfitting at $915–$2,500 per m². Big display floors with simple joinery sit low in that range, while lit feature walls and a client lounge push it up.

Commercial fitout costs in Perth: what real jobs cost per m²

Commercial fitouts in Perth follow the resources cycle: when iron ore and gas are busy, St Georges Terrace fills up and fitout crews are booked months ahead. These examples show what each kind of job draws from the rate card above.

Use the form on this page to get quotes from commercial fitout contractors in Perth.

Why commercial fitout costs in Perth land where they do

Commercial fitouts in Perth carry cost drivers other markets do not: freight time on anything sourced from the east, trades bid away by mine-site shutdowns, and February heat that settles the cooling scope before the layout is drawn.

Use the form on this page to get quotes from commercial fitout contractors in Perth.

How to Control Commercial Fitout Costs in Perth

1
Perth's metro area stretches a long way along the coast, so if a business has sites from Joondalup to Rockingham, combine them in one contract to share crews and deliveries.
2
Schedule roof penetrations, new condensers and shopfront works outside the wet months, since most of Perth's rain falls between May and September.
3
In Kewdale, Welshpool or Canning Vale warehouses, start the office from Cat A base-building pricing and add plasterboard rooms only where the team will use them.
4
Ask a CBD or West Perth landlord whether a vacated floor's fit-out can stay; reusing sound partitions, ceilings and kitchens saves the cost and lead time of new systems, some of which come from the eastern states.
5
In Fremantle's West End heritage precinct, ask early which original walls, floors and shopfronts are protected, so the design avoids costly redraws.

Commercial fit-out cost by floor area in Perth

Quick answerIn Perth, a standard tenant office fit-out is priced at $1,375–$2,275 per m², and a premium CBD floor with a boardroom and client areas at $2,275–$3,650 per m².

Perth office space runs from CBD towers on St Georges Terrace to low-rise blocks in West Perth, Subiaco and Osborne Park, so many jobs are suites rather than whole floors. A 600 m² Subiaco floor at $1,375–$2,275 per m² comes to $825,000–$1,365,000. Where a firm wants a ring of fixed offices, each extra enclosed room adds partition and cooling work, so the rate per m² rises with the room count as well as the area.

Summer heat makes cooling and glazing treatment a large line in Perth, items from the eastern states add freight and lead time, and resources-sector demand can tighten trade supply. A tenancy with sound ceilings and ductwork can be reworked with a services upgrade at $185–$410 per m², while stripping a dated fit-out first adds $28–$135 per m².

Our Methodology

These are independent, GST-inclusive estimates from commercial contractors, suppliers and rate guides, and no contractor can influence them, so always get several written quotes. Read our full methodology →

Commercial fitout cost in Perth: office, retail and restaurant fit-out per m²

Commercial fitout in Perth is priced per square metre of floor by category. A Cat A fit-out of base-building services and finishes costs $365–$650 per m², a standard tenant Cat B fit-out $1,375–$2,275 per m², and a full or premium Cat B $2,275–$3,650 per m². Retail shopfitting runs $915–$2,500 per m².

A restaurant or bar fit-out in Perth is the dearest category at $2,550–$4,100 per m², because the kitchen, exhaust, plumbing and fire services carry it; for a 150m² cafe that is a different project from an office of the same size. Inside an office fit-out, plasterboard partitioning costs $110–$205 per m², glazed partitioning $460–$1,285 per metre run, a suspended ceiling $46–$135 per m², and workstations $1,100–$4,650 each.

Coming out of an existing tenancy, an office strip-out back to the base building with disposal is $28–$135 per m². A Perth fit-out quote should state the category, the floor area the rate is applied to, and which lines are inside it, so that a per-m² figure can be checked against what is actually being built.

What a Compliant Commercial Fitout Quote Includes — Cost in Perth

Perth quotes stretch from St Georges Terrace head offices to Fremantle heritage tenancies and showrooms spread from Joondalup to Rockingham, and each should state the area, the category and the travel and access assumptions behind its rate.

Frequently Asked Questions — Commercial Fitout Cost in Perth

What do fit-out companies charge in Perth?
Going by our Perth table, expect $1,375–$2,275 a square metre for a standard Cat B tenant fit-out, $365–$650 a square metre for a Cat A fit-out (base building) and $915–$2,500 a square metre for retail shopfitting.
What does it cost to fit out a restaurant or bar in Perth?
Perth restaurants and bars generally fit out at $2,550–$4,100 per m², with a mid-point near $3,375 per m². The figure depends heavily on the building: a Northbridge or Leederville shell with existing exhaust and grease trap is simpler to work with than a Fremantle limestone building needing new services. Ask for kitchen equipment, the cool room and bar joinery to be priced as separate lines so quotes compare cleanly.
How much does an office fit-out cost in Perth?
In our Perth table: a standard Cat B tenant fit-out $1,375–$2,275 a square metre, a full or premium Cat B fit-out $2,275–$3,650 a square metre and plasterboard office partitioning $110–$205 a square metre.
What pushes a Perth corporate office fit-out into the premium price band?
A premium corporate fit-out in Perth costs $2,275–$3,650 per m², typically around $2,750 per m², against $1,375–$2,275 per m² for a standard tenant fit-out. The step up comes from boardrooms and client suites, feature joinery, extensive glazed partitioning at $460–$1,285 per metre, upgraded air-conditioning and premium finishes. CBD and West Perth towers can add after-hours work and lift bookings. Deciding early which rooms carry the premium finish keeps the rest of the floor at standard rates.
What does a shop fit-out cost in a Perth shopping centre or high street?
Retail shopfitting in Perth costs $915–$2,500 per m², typically about $1,825 per m², covering display joinery, counters, lighting, flooring and finishes. Shopping-centre tenancies often involve after-hours work, which adds labour. Street shops in Subiaco, Leederville or Fremantle allow more freedom, though Fremantle's limestone buildings add work around thick walls and timber floors. Taking over a used shop starts with a strip-out, including disposal, at $28–$135 per m².
What does office partitioning cost in Perth?
Perth office partitioning is priced by area or by length. Plasterboard stud walls cost $110–$205 per m² of wall, typically about $159 per m², while glazed partitioning for meeting rooms and offices runs $460–$1,285 per metre, commonly near $730 per metre. Doors, acoustic insulation and frosting change the price, and partition systems ordered from eastern-states suppliers can carry longer lead times.
How much does a medical centre fit-out cost in Perth?
A medical centre or specialist suite fit-out in Perth costs $1,650–$3,200 per m², with a typical figure near $2,425 per m². The clinical layer is what sets the rate: hand basins and drainage to each consult room, acoustic walls, sealed floors and the extra circuits and data behind imaging or dental equipment. Specialist suites in Nedlands or near the Murdoch health precinct carry more rooms and procedure spaces and sit toward the upper figure; a suburban GP clinic in a Joondalup centre with a handful of consult rooms stays nearer the low end.
What does a services upgrade cost in a Perth office fit-out?
When a Perth tenancy needs more cooling, power or data than the base building offers, the upgrade is priced as its own line at $185–$410 per m², typically about $275 per m². Hot summers mean mechanical rebalancing for new meeting rooms is the usual trigger, followed by circuits for a kitchenette and server room and data to every desk. Older low-rise blocks in West Perth and Subiaco tend to sit toward the upper figure; a recently refurbished CBD floor with spare capacity needs only minor adjustment.
What does stripping out a previous tenant's fit-out cost in Perth?
Clearing an old fit-out back to base building in Perth, with disposal included, is priced at $28–$135 per m², typically around $55 per m². Light office partitions and carpet tiles in a Leederville or Osborne Park building are at the low end. A former restaurant in Northbridge or a Fremantle heritage tenancy with tiled floors, a kitchen, heavy joinery and layers of old cabling takes longer, sends more to landfill and sits toward the upper figure. Confirm that bins, lift protection and any after-hours removal are inside the line.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage