Independent Australian Cost Guides
Updated November 2026
← Commercial Painting across Australia

How much does commercial painting cost in Perth?

Commercial painting in Perth is priced $14-$41/m2
per m² of wall and ceiling area, with surface prep, access and after-hours work priced separately
On a Canning Vale warehouse in Perth, wall painting runs $20–$41 per m² and recoating metal roof or wall cladding $18–$44 per m². Steel beams, columns and metalwork repainted in place sit at $14–$41 per m².
+3.5% Commercial painting costs in Perth are up around 3.5% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Office Repaint in Perth
$27/m2
interior, per m² of wall area, two coats supplied & applied
Interior office repaint
$18-$41/m2
Exterior facade repaint
$37-$83/m2
Warehouse / industrial coating
$20-$41/m2
$18/m2$27/m2$41/m2

Perth commercial painting falls in the $18–$41 per m² band for wall and ceiling work. Surface type, the washing and priming needed to get paint to bond to sun-chalked surfaces, and access to the work are the main things that set a job's position in that band.

Perth's commercial buildings include offices in West Perth and the CBD, heritage limestone and brick in Fremantle, shopfronts in Subiaco and Mount Lawley, and large tilt-up and metal-clad warehouses in Osborne Park, Malaga, Welshpool and Kewdale. Long, hot summers fade and chalk exterior coatings, and coastal sites from Cottesloe to Scarborough contend with salt and wind.

Facade and render repaints are priced at $37–$83 per m², typically $59 per m², and owners of several properties can budget a maintenance cycle costing $1,825–$27,400 per project. All prices include GST.

Quick answerCommercial painting in Perth is priced per square metre and varies widely by substrate, surface prep, access height and whether work runs after hours. Verified bands are $14-$41/m2. Get free Perth quotes →

Commercial Painting Prices in Perth 2026: Cost Table, Price List and Hourly Rates

ServiceLowTypicalHigh
Colour and spec consultation (inspection usually free)$185per job$320$455
Interior commercial repaint (walls & ceilings)$18per m²$27$41
Exterior commercial repaint (facade & render)$37per m²$59$83
Warehouse & factory wall painting$20per m²$33$41
Structural steel & metalwork repaint (maintenance, in situ)$14per m²$27$41
Protective / industrial coating system$46per m²$82$130
Intumescent / fire-rated coating$41per m²$82$120
Surface preparation (wash, sand, patch, prime)$7.30per m²$14$23
High-access work (EWP / scaffold loading)$455per day$820$1,825
After-hours / night-shift loading (two-painter crew)$230per day$460$820
Line marking & epoxy floor coating (adjacent)$27per m²$37$50
Repaint cycle / maintenance contract$1,825per project$7,300$27,400
Commercial painter hourly rate$55per hour$68$87
Metal roof / wall cladding repaint (warehouse)$18/m²$32$44
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local contractor will be in touch about your job. No spam, no call centre.

Scoping commercial painting work in Perth? Get a quote from a local commercial contractor - free, no obligation.

Get Perth quotes →

Prices include GST. Perth metro, November 2026.

Commercial Painting Costs by Sector in Perth

St Georges Terrace office floors

$18–$41 per m²

Office towers along the Terrace and in West Perth turn over tenancies constantly, and each handback brings patching, repainting and making good. Walls and ceilings price at $18–$41 per m², usually painted after hours.

Fremantle limestone and heritage shopfronts

$37–$83 per m²

Limestone, render and timber shopfronts in the Fremantle West End need breathable coatings and careful patching where salt air and sea breezes have done their work. Priced on the exterior facade and render rate of $37–$83 per m².

Welshpool, Kewdale and Malaga warehouses

$20–$41 per m²

Warehouses, transport depots and fabrication sheds in the eastern and northern industrial suburbs of Perth are painted inside at $20–$41 per m² on the warehouse rate. Dust, racking and dawn-to-dusk shifts set the program.

Kwinana and Henderson heavy industry

$46–$130 per m²

Processing plant at Kwinana and marine fabrication around Henderson need protective systems on steel facing salt air and hard summer sun. These price at $46–$130 per m², with blasting and film thickness checks built into the program.

What Perth Commercial Painting Jobs Actually Cost

Shop fitout painting on Beaufort Street

$7,544–$19,560 total

A Mount Lawley tenancy with about 280 m² of walls and ceilings to prep and paint before opening. Prep at $7.30–$23 per m², coats at $18–$41 per m², plus two days of after-hours loading at $230–$820 a day to finish around other trades.

UV-faded facade on a Subiaco office

$36,030–$85,650 total

Around 900 m² of render and feature panels on a three-storey office, chalky from years of Perth sun. Coats at $37–$83 per m², with six days of boom lift at $455–$1,825 a day, booked for spring or autumn rather than the hottest weeks.

Kewdale warehouse internal walls

$62,275–$132,125 total

About 3,000 m² of tilt-panel walls inside a distribution centre. Painted at $20–$41 per m², with five days of scissor and boom lift at $455–$1,825 a day for the upper panels above the racking.

Cottesloe beachfront balustrades and steel

$5,325–$16,000 total

Around 250 m² of balustrades, stairs and canopy steel on a beachfront building, rust-treated and recoated in place. Prep at $7.30–$23 per m², then coats at $14–$41 per m², worked in calm mornings before the afternoon sea breeze picks up.

Fire-rated steel in a city office refurbishment

$22,320–$67,300 total

Roughly 500 m² of exposed beams and columns in a refurbished office, coated with an intumescent system at $41–$120 per m². Four days of lift access at $455–$1,825 a day reach the high members over a series of weekends.

Get a commercial painting quote in Perth

Commercial contractors · Free quotes. No obligation, no spam.

Get Quotes in Perth →Max 2 contractors will contact you

What Affects Commercial Painting Costs in Perth

Perth commercial painting is shaped by intense sun, hot dry summers and coastal winds. CBD and West Perth offices, Subiaco and Mount Lawley shopfronts, Fremantle heritage buildings, and warehouses in Welshpool, Kewdale and Malaga each need different preparation, coatings and access.

UV and heat

Strong summer sun breaks down paint quickly on north- and west-facing walls. UV-resistant topcoats and lighter colours help, with exterior repaints running $37–$83 per m².

Fremantle limestone and heritage

Limestone and older brick buildings in Fremantle need careful cleaning, repair and breathable coatings. Hand preparation and detailed trims take more time than modern render.

Sea breeze and salt

Buildings in Cottesloe, Scarborough and Fremantle face salt air and the afternoon sea breeze. Marine-grade coatings and wind delays on spray work add cost.

Warehouse painting

Warehouses in Welshpool, Kewdale and Malaga need coatings for tilt-up walls, steel and cladding. Warehouse wall painting runs $20–$41 per m², with high walls needing platforms.

Labour rates and travel

The metro area is wide, so travel to outer sites adds cost. Labour runs $55–$87 an hour, with out-of-hours loadings on top for shops and offices that stay open.

Budgeting a commercial repaint

Owners and managers often budget repaint programs across several sites. These range $1,825–$27,400 per project, depending on area, access and surface condition.

How to Control Commercial Painting Costs in Perth

1
Book Perth exterior repaints for spring or autumn, avoiding summer heat that dries paint too fast and the wetter months from May to August.
2
Get spray work done in the morning, before the Fremantle Doctor arrives and carries overspray across car parks and neighbouring roofs.
3
Fix or redirect reticulation that sprays bore water onto walls before repainting, or orange iron stains will soon mark the new paint.
4
Group sites by corridor, keeping northern suburbs such as Joondalup apart from southern ones such as Rockingham, so crews are not crossing the metro area each day.
5
In Malaga, Welshpool or Canning Vale, schedule internal tilt-panel painting around racking moves, with platform days at $455–$1,825 a day booked as a block.

Commercial painting cost by area in Perth

Quick answerA Perth commercial interior typically costs $18–$41 per m² of wall and ceiling, and a rendered exterior $37–$83 per m², with $59 per m² typical before prep and access.

The total tracks the measured surface, from a Mount Lawley shopfront to tilt-panel distribution centres in the industrial suburbs. Painting 2,000 m² of internal panel wall in a Malaga warehouse at $20–$41 per m² comes to $40,000–$82,000, with platform days added above the racking. Smaller tenancies spread setup across fewer square metres, so their effective rate climbs.

Sun-chalked render on west-facing walls needs washing and priming at $7.30–$23 per m² before topcoats, and Fremantle limestone takes slow hand preparation. Salt near Cottesloe and Scarborough adds rust treatment to steel, while sound interior plaster in a modern office sits low in each range.

Our Methodology

These are independent, GST-inclusive estimates from commercial contractors, suppliers and rate guides, and no contractor can influence them, so always get several written quotes. Read our full methodology →

Commercial painting cost in Perth: budgeting a building repaint

The cost to paint a commercial building in Perth is easiest to budget by surface. Exterior facade and render repaints run $37–$83 per m², with $59 per m² typical; interior walls and ceilings $18–$41 per m²; and warehouse and factory walls $20–$41 per m². Preparation is costed separately at $7.30–$23 per m².

Perth's long, hot summers and intense sun fade and chalk coatings quickly, especially on west-facing walls, so exterior repaints come around sooner and need thorough washing before a new coat will bond. Industrial areas such as Osborne Park, Welshpool, Malaga and Kewdale have large tilt-up and metal-clad buildings, with cladding repaints at $18–$44 per m². Inner-city work in Subiaco, Fremantle and Mount Lawley is more often heritage shopfronts and offices, where hourly work at $55–$87 an hour suits small repairs. Coastal buildings in Cottesloe and Fremantle also face salt air, which adds rust treatment for metal trims.

For budgeting over several years, owners often move to a repaint cycle at $1,825–$27,400 per project. A good quote to paint a Perth commercial building should give measured areas for each surface, the UV-resistant coating system, preparation of chalky surfaces, access equipment, and when the work will be done to avoid the worst of the summer heat.

What a Compliant Commercial Painting Quote Includes — Cost in Perth

Perth commercial painting quotes should show how summer heat, coastal salt and heritage limestone have been allowed for, and which hours the painters expect to work. Check the quote for each of the points below before comparing figures.

Frequently Asked Questions — Commercial Painting Cost in Perth

What does an interior commercial repaint cost in Perth?
In our Perth table, an interior commercial repaint (walls and ceilings) runs $18–$41 a square metre, and $27 is typical.
What does painting a shop fitout cost in Perth?
Painting a Perth shop fitout is usually priced on wall and ceiling area at $18–$41 per m², with $27 per m² typical. Tenancies in Subiaco, Mount Lawley and Fremantle are often painted once partitions and joinery are in, then finished with touch-ups after the shopfitters leave. Those touch-ups are commonly charged at $55–$87 per hour, so agree in advance whether they are included.
How much does a repaint cycle or maintenance contract cost in Perth?
A repaint cycle or maintenance contract is $1,825–$27,400 in our Perth table, typically $7,300.
What does surface preparation add to a Perth commercial paint job?
Surface preparation on Perth commercial jobs costs $7.30–$23 per m², with $14 per m² typical, and is often listed as its own line. Harsh summer sun leaves exterior paint chalky and flaking, and limestone and render in Fremantle and Cottesloe can be dusty or salt-affected, so washing, scraping, filling and priming take time. Skipping preparation lowers the price but shortens the life of the new coating.
What does painting warehouse walls cost in Welshpool, Kewdale or Malaga?
Warehouse and factory wall painting in Perth costs $20–$41 per m², with $33 per m² typical. Tilt-up concrete and block walls in Welshpool, Kewdale, Malaga and Osborne Park are usually rolled or sprayed from elevated platforms, and wall height moves the rate within that spread. Sun-chalked surfaces are washed and primed first at $7.30–$23 per m². Steel cladding on the same building is priced separately at $18–$44 per m².
How much does an exterior commercial repaint cost in Perth?
A Perth exterior commercial repaint costs $37–$83 per m², and $59 per m² is typical. Fierce summer sun is tough on west-facing walls and dark colours, so many owners choose lighter, UV-resistant topcoats. Offices and showrooms along main roads in Osborne Park or North Perth that are reached by boom lift or scaffold sit toward the higher end of the range.
What does repainting metal cladding cost on a Perth warehouse?
Repainting metal roof or wall cladding on a Perth warehouse is $18–$44 per m², with $32 per m² typical. Sheds across Kewdale, Welshpool and Malaga fade and chalk under long summers of intense sun, and coastal sites towards Fremantle carry rust at laps and screws that is treated before coating. Heat-reflective colours are a common choice, and roof sheeting painted from an EWP picks up the high-access loading of $455–$1,825 a day where needed.
What hourly rate do Perth painters charge for commercial touch-ups?
Perth commercial painters bill $55–$87 an hour, with $68 an hour typical, for touch-ups and small repairs. Typical cases are a Subiaco shop that needs scuffs patched before a lease inspection, a handful of doors in a Mount Lawley clinic or wall repairs after signage comes down in Fremantle. Larger scopes are measured instead, with interiors at $18–$41 per m², and a quote should say which basis applies to each item.
How much does boom lift or scaffold access add in Perth?
Where a Perth facade needs a boom lift, swing stage or scaffold, the quote carries a high-access line of $455–$1,825 a day, typically $820 a day, in addition to the exterior rate of $37–$83 per m². Office buildings along St Georges Terrace and in West Perth, and multi-level strata in Cottesloe and North Perth, are the usual cases, and the line runs for each day the plant is hired. Strong afternoon sea breezes can halt work at height, so ask how lost days are treated.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage