Independent Australian Cost Guides
Updated November 2026
← Commercial Flooring across Australia

How much does commercial flooring cost in Perth?

Commercial flooring in Perth is priced $32-$135/m2
per m² by system - safety vinyl, LVT, epoxy, carpet tile and subfloor prep priced separately
Perth quotes compare by floor system: broadloom carpet at $37–$100 per m², vinyl plank at $50–$100 per m², and epoxy coating for a Canning Vale warehouse slab at $27–$82 per m². A moisture test on the slab is priced on its own at $185–$455 per job.
+2.9% Commercial flooring costs in Perth are up around 2.9% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Commercial Floor in Perth
$77/m2
per m² supplied & installed
Carpet tile / commercial carpet
$37-$100/m2
Safety vinyl / LVT
$32-$83/m2
Epoxy / polished concrete
$46-$135/m2
$32/m2$77/m2$135/m2

Perth commercial floors cost $32–$135 per m², from commercial vinyl at the entry point to polished concrete at the top. The finish sets the opening rate; the slab, the access window and how far product has to travel to reach the site decide where a quote ends up.

Perth's commercial work splits between office towers in West Perth and the CBD, heritage limestone and brick premises in Fremantle and Northbridge, and warehouse estates at Osborne Park, Malaga, Welshpool and Kewdale. Office refits favour carpet tile, warehouses a coated slab with aisle marking at $3–$14 per metre. Hot summers shorten the open time of adhesives and coatings, so crews often start early.

Before the finish rate, budget for lifting what is there now at $7.30–$23 per m² and for levelling an uneven slab at $23–$55 per m². Figures include GST.

Quick answerCommercial flooring in Perth is priced per square metre and varies widely by system - carpet tile, safety vinyl, LVT, epoxy or polished concrete - plus subfloor prep and removal scope. Verified bands are $32-$135/m2. Get free Perth quotes →

Commercial Flooring Prices in Perth 2026: Cost Table and Price List

ServiceLowTypicalHigh
Moisture testing (measure and quote usually free)$185per job$320$455
Commercial vinyl & safety vinyl (supply + install)$32per m²$55$83
Vinyl plank / LVT (supply + install)$50per m²$77$100
Carpet tile (supply + install)$37per m²$68$100
Broadloom / commercial carpet (supply + install)$37per m²$68$100
Epoxy floor coating system (supply + install)$27per m²$64$82
Polished concrete (grind & seal)$46per m²$91$135
Anti-slip treatment or coating (existing floor)$27per m²$51$92
Subfloor prep & floor levelling / screed$23per m²$42$55
Removal & disposal of old floor$7.30per m²$14$23
Line marking on floors$3per metre$8$14
After-hours / weekend install loading (300 sqm commercial vinyl install)$1,650per project$2,000$2,650
Anti-static (ESD) floor system (supply + install)$55per m²$87$115
Timber floor sanding & refinishing (commercial)$27per m²$41$55
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local installer will be in touch about your job. No spam, no call centre.

Scoping commercial flooring work in Perth? Get a quote from a local commercial contractor - free, no obligation.

Get Perth quotes →

Prices include GST. Perth metro, November 2026.

Commercial Flooring Costs by Sector in Perth

CBD and West Perth offices and conference rooms

$37–$100/m²

Head offices in the Perth CBD and West Perth, many serving the resources sector, pair carpet tile at $37–$100 per m² across open-plan areas with broadloom in conference rooms and boardrooms, where its acoustic softness matters.

Medical and childcare in the northern suburbs

$32–$83/m²

New medical centres, pharmacies and childcare buildings across the northern suburbs, from Alexander Heights out to Banksia Grove and the growth corridor beyond, are mostly finished in welded heavy-duty vinyl at $32–$83 per m². Welded seams keep water and spills out of the joints in treatment rooms.

Welshpool, Kewdale and Malaga factory slabs

$27–$82/m²

Factories and workshops in Welshpool, Kewdale, Malaga and Canning Vale coat slabs in epoxy at $27–$82 per m² or grind and seal them at $46–$135 per m². Hot summer afternoons shorten the working time of resins, so many applicators start at dawn.

Commercial kitchens and wet areas

$27–$92/m²

Kitchens, bathrooms and wash-down areas in Northbridge and Fremantle venues often keep their existing tiles and add grip with an anti-slip treatment at $27–$92 per m². Full replacement in safety vinyl costs $32–$83 per m² where tiles are cracked or drummy.

Commercial flooring prices in Perth: what typical jobs cost

Commercial flooring in Perth covers everything from a conference room refit on St Georges Terrace to a full warehouse slab in Kewdale, and the price moves with the finish, the state of the slab and how much of the work has to happen outside trading hours. Long dry summers help coatings cure quickly but push some jobs to early starts before the afternoon heat. Recent job shapes:

Use the form on this page to get quotes from commercial flooring contractors in Perth.

Commercial flooring costs in Perth: what moves the quote

Commercial flooring in Perth, WA, is priced on freight, heat and distance before a product is chosen. Most sheet goods and carpet arrive by road train or ship, so a range not held in a Canning Vale or Bibra Lake warehouse carries a lead time and a freight margin. Conference room flooring for a resources company at Elizabeth Quay is usually broadloom at $37–$100 per m² chosen for acoustics, and the price climbs when the job must fit between a Friday close and a Monday opening.

Heat is the second driver. Easterly days over forty degrees shorten the working time of adhesives and epoxies, so a Jandakot or Forrestfield hangar floor at $27–$82 per m² is often laid before dawn in summer. Sand is the third: it tracks into Scarborough and Cottesloe shopfronts and chews through soft finishes, pushing beachside tenancies toward safety vinyl at $32–$83 per m² or grind-and-seal concrete at $46–$135 per m² instead of carpet.

Under all of it sits the slab. The limestone and sand base beneath much of the metro area lets older slabs settle unevenly, so levelling at $23–$55 per m² appears on many Bentley and Cannington quotes, and taking up what is already there adds $7.30–$23 per m². Use the form on this page to get quotes from commercial flooring companies in Perth.

How to Control Commercial Flooring Costs in Perth

1
Schedule epoxy and sealer coats on open-fronted Perth sheds for the morning, before the Fremantle Doctor sea breeze picks up and blows dust and sand onto wet resin.
2
Medical and childcare operators with sites in Alexander Heights, Banksia Grove and other City of Wanneroo suburbs can group refloors into one booking to cut travel along the northern corridor.
3
Most rain falls from May to August, so book glue-down work on older ground slabs for late spring or early autumn, after a moisture test at $185–$455.
4
School and campus buildings can book refloors into the long summer break from mid-December to the end of January, when classrooms can be cleared in one go.
5
If you also run sites in the Pilbara or the South West, ask for them to be priced apart from metro work, as flights, accommodation and freight are costed differently.

Commercial flooring cost by floor area in Perth

Quick answerIn Perth, most commercial floors are costed by the square metre: welded or safety vinyl at $32–$83 per m² for clinics and kitchens, or carpet tile at $37–$100 per m² for offices, times the area laid.

Perth work runs from single consulting rooms in the northern suburbs to warehouse floors south of the river, and the rate per m² usually eases as the area grows, since setup and delivery are largely fixed. A 2,000 m² Bibra Lake warehouse coated in epoxy at $27–$82 per m² comes to $54,000–$164,000 before grinding and line marking.

Older slabs needing levelling at $23–$55 per m² lift a Perth job, as does summer heat that cuts working time and pushes crews into early starts. Occupied CBD and West Perth offices laid after hours add a weekend or night loading of $1,650–$2,650 for a 300 m² vinyl floor. Sites out at Ellenbrook or Mandurah add travel.

Our Methodology

These are independent, GST-inclusive estimates from commercial contractors, suppliers and rate guides, and no contractor can influence them, so always get several written quotes. Read our full methodology →

Commercial flooring cost per m² in Perth by floor type

Commercial flooring cost in Perth is quoted per square metre supplied and installed, and the floor type sets the band. Commercial vinyl and safety vinyl cost $32–$83/m², an epoxy floor coating $27–$82/m², broadloom commercial carpet $37–$100/m² and carpet tile $37–$100/m². Polished concrete, a grind and seal on the existing slab, is the widest band at $46–$135/m².

Two lines sit under every floor: removal and disposal of the old floor at $7.30–$23/m², and subfloor preparation with floor levelling or screed at $23–$55/m² where the slab is not flat enough for the new finish.

On a warehouse or factory floor, line marking on the finished floor adds $3–$14/m². A Perth flooring quote should state the floor type, whether removal and prep are inside the rate, and the area it applies to.

What a Compliant Commercial Flooring Quote Includes — Cost in Perth

Perth flooring quotes should state the conditions a product is installed under as plainly as the rate. Summer heat shortens adhesive open time and travel across a spread-out metro area adds up, so ask that both are addressed before per-m² prices are lined up.

Commercial vinyl flooring prices in Perth: sheet, safety and plank

Commercial vinyl flooring in Perth is the usual pick for clinics, aged care, school wet areas and shop floors because it welds into a seamless, mop-friendly surface and shrugs off the sand that blows through every doorway in summer. Sheet and safety vinyl sit at $32–$83 per m² supplied and installed, with the upper end covering slip-resistant safety grades and coved skirting in wet areas. Vinyl plank and LVT run $50–$100 per m², and suit Leederville cafés and Mount Lawley offices where the look matters more than hose-down performance.

Use the form on this page to get a quote from commercial vinyl flooring installers in Perth.

Frequently Asked Questions — Commercial Flooring Cost in Perth

How much does commercial flooring cost in Perth?
In our Perth table: commercial or safety vinyl $32–$83 a square metre, carpet tile $37–$100 a square metre and polished concrete $46–$135 a square metre.
What does commercial kitchen flooring cost for a Perth cafe or restaurant?
Commercial kitchen floors in Perth are usually safety vinyl or a seamless epoxy system. Safety vinyl with welded seams and coved edges costs $32–$83 per m² supplied and installed, and an epoxy coating system costs $27–$82 per m², typically $64 per m². Drains, falls to waste and coving lift a kitchen toward the higher end. Old tiles may need lifting first at $7.30–$23 per m², and hot days shorten working time.
How much do epoxy floors cost in Perth?
An epoxy floor coating system is $27–$82 a square metre in our Perth table, typically $64.
What do Perth installers charge for commercial vinyl flooring?
Commercial and safety vinyl in Perth costs $32–$83 per m² supplied and installed, with typical jobs near $55 per m². Sheet vinyl with heat-welded seams suits clinics, kitchens and wet areas, while LVT planks are common in offices and shops. For welded vinyl in Perth clinics and food businesses, ask whether coved skirting and seam welding are included in the rate or charged as extras.
What flooring suits a Perth conference room, and what does it cost?
Conference rooms and boardrooms in Perth offices usually take carpet, either broadloom for a seamless look or carpet tile for easy replacement, at $37–$100 per m² supplied and installed, typically around $68 per m². Carpet absorbs sound and stops voices echoing off glazed walls. Where a room sits on a raised access floor in a CBD or West Perth tower, tiles let panels be lifted for cabling.
What does it cost to grind and seal a factory slab in Perth?
Grinding and sealing a factory slab in Perth costs $46–$135 per m², typically about $91 per m², while an epoxy coating system over the slab runs $27–$82 per m². Factories in Welshpool, Kewdale, Malaga and Canning Vale often add forklift and pedestrian line marking at $3–$14 per metre. Oil-stained, cracked or uneven slabs need extra grinding and repairs, which sit on top of the base rate.
What does carpet tile cost for a Perth office floor?
Carpet tile for Perth offices, from the CBD and West Perth to suburban centres like Joondalup and Osborne Park, costs $37–$100 per m² supplied and laid, with $68 per m² the usual quote. Broadloom for a boardroom shares the band at $37–$100 per m². Product grade, backing and workstation moves set the price within it. Perth's isolated supply chain means stock lead times matter, so confirm the tile is held locally before committing to an install date.
What does anti-slip flooring cost for wet areas in a Perth venue?
Pool surrounds, change rooms, bar floors and kitchen passes in Perth venues often have a tiled floor that is safe when dry and treacherous when wet. An anti-slip treatment or coating applied to that existing floor costs $27–$92 per m², typically $51 per m². Etching the tile sits at the lower end and a textured resin coating with coving at the upper end. Where the area is to be refloored instead, safety vinyl at $32–$83 per m² is the other common answer for wet areas.
How much is an anti-static floor for a Perth data room or lab?
Resources companies, hospitals and the universities in Perth run server rooms, control rooms and labs that call for an anti-static, or ESD, floor. Installed, the system costs $55–$115 per m², with $87 per m² common. That covers conductive vinyl tile or resin, copper earthing tape and the resistance test at handover. Small rooms sit at the upper end, as do live rooms where the floor is laid in sections around racks.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage