Gas Fitting Cost Australia 2026
All gas work in Australia must be performed by a licensed gas fitter. Costs depend on the type of work, materials needed, and whether new gas lines are required.
Choose Your City
National Pricing Overview
| Service | Low | Typical | High |
|---|---|---|---|
| Gas fitting (hourly rate) | $100/hr | $150 | $200 |
| Call-out / service fee | $80flat | $120 | $180 |
| Gas cooktop installation | $150per job | $280 | $450 |
| Gas oven installation | $180per job | $320 | $500 |
| Gas bayonet / outlet installation | $150per job | $250 | $400 |
| Gas hot water system connection | $200per job | $350 | $600 |
| Gas heater installation (flued) | $300per job | $550 | $900 |
| Gas line installation (new run) | $500per job | $900 | $2,000 |
| Gas leak detection & repair | $200per job | $380 | $600 |
| Compliance certificate | $80per cert | $120 | $150 |
| Gas meter relocation | $600total | $1,200 | $2,500 |
| LPG to natural gas conversion | $400total | $800 | $1,500 |
Ready to get quotes for gas fitting work? Get a quote from a verified local tradie — free, no obligation.
Get free quotes →National average prices. Select a city above for location-specific pricing.
Gas fitters in Australia charge $100–$200 per hour, with most jobs also attracting a call-out fee of $80–$180. All gas work in Australia must be performed by a licensed gas fitter — DIY gas work is illegal and extremely dangerous. Every job requires a compliance certificate.
We've compiled pricing from licensed gas fitters across Australia, plus leading tradie platforms listings as of April 2026. All prices include GST.
Gas Fitting Costs by Room and Home Size
Carpet cleaning is usually quoted per room or per square metre. Most companies offer discounted rates for whole-house cleans. Here's what typical jobs cost:
| Job | Cost Range | Notes |
|---|---|---|
| Single room | $25–$50 | Standard room up to 12m² |
| 2-bedroom home | $120–$220 | 2 bedrooms + hallway + lounge |
| 3-bedroom home | $170–$320 | 3 bedrooms + hallway + lounge |
| 4-bedroom home | $220–$400 | Full house clean |
| End of lease clean (2-bed) | $180–$300 | Includes guarantee for bond return |
| End of lease clean (3-bed) | $250–$400 | Includes guarantee for bond return |
| Stain treatment (per stain) | $20–$50 | Red wine, coffee, pet stains |
| Deodorising treatment | $30–$80 | Pet odour, smoke smell |
| Scotchgard protection | $3–$7 per m² | Stain-resistant coating applied after clean |
| Rug cleaning (per rug) | $30–$80 | Depends on size and material |
End of lease gas fitting is the most common booking type. Most companies offer a bond-back guarantee — they'll return and re-clean for free if the agent isn't satisfied. Always get a receipt specifying the rooms cleaned and the cleaning method, as real estate agents typically require this for bond release.
Steam Cleaning vs Dry Cleaning: Which Method Is Better?
The two main gas fitting methods have different strengths. Understanding the difference helps you choose the right service:
| Factor | Steam (Hot Water Extraction) | Dry Cleaning |
|---|---|---|
| Cost | $25–$50 per room | $30–$60 per room |
| Cleaning depth | Deep — reaches carpet base | Surface to mid-level |
| Drying time | 4–8 hours | 1–2 hours |
| Best for | Deep stains, pet odours, heavily soiled | Regular maintenance, delicate fibres |
| Allergen removal | Excellent — kills dust mites | Good |
| Risk | Over-wetting if done poorly | Chemical residue if not rinsed |
| Bond clean accepted? | Yes — most agents prefer it | Sometimes — check with agent |
Steam cleaning (hot water extraction) is the industry standard and what most real estate agents require for end-of-lease cleans. It provides a deeper clean and better allergen removal. Dry cleaning is faster and uses less water, making it better for delicate carpets or situations where you need the room back quickly. For general home cleaning, steam cleaning every 12–18 months is recommended by carpet manufacturers.
What Affects Gas Fitting Costs in Australia
Licensed gas fitter required
All gas work in Australia must be done by a licensed gas fitter. Unlicensed gas work is illegal, voids insurance, and is a serious safety risk. Always verify your gas fitter's licence.
Type of work
Simple appliance connections ($150–$450 in Australia) are straightforward. New gas line installations and meter upgrades ($150–$400) are more complex and require extensive compliance documentation.
Compliance certificate
Every gas job in Australia requires a compliance certificate. This is included in most quotes but always confirm — the certificate is your legal proof the work meets Australian standards.
After-hours & emergency
Gas leaks and emergency gas work in Australia attract premium rates — often 1.5–2x the standard hourly rate. If you smell gas, call your gas provider first before calling a gas fitter.
Materials
Gas fittings, bayonets, regulators, and pipe are charged on top of labour in Australia. Always ask whether materials are included in the quoted price.
Appliance type
Cooktops, ovens, heaters, and hot water systems all have different installation requirements. More complex appliances like outdoor BBQ points ($200–$600 in Australia) take longer to install.