Glazier Cost Australia 2026
Glazier costs in Australia vary by job type and city. A standard single-glazed window replacement runs $300-$800 in most capitals, minor glass repairs start around $100, and a whole-home reglazing or double-glazing project can reach $3,000-$40,000+. Pick your city below for local pricing, or see the national job-by-job breakdown underneath.
Glazier Prices by City
National Pricing Overview
| Service | Low | Typical | High |
|---|---|---|---|
| Single-pane / minor glass repair | $100per job | $220 | $400 |
| Emergency glass repair / board-up (after-hours) | $150per job | $350 | $600 |
| Single-glazed window replacement (per window) | $150per window | $500 | $1,500 |
| Double-glazed unit (IGU) replacement (per window) | $600per window | $1,100 | $2,000 |
| Retrofit double glazing (per window) | $550per window | $950 | $1,500 |
| Glass splashback (supply + install) | $450per job | $850 | $1,500 |
| Framed shower screen (supply + fit) | $400supply+fit | $800 | $1,200 |
| Frameless shower screen (supply + fit) | $800supply+fit | $1,800 | $3,000 |
| Mirror (wall, supply + install) | $200per job | $420 | $750 |
| Glass balustrade (per m) | $350per metre | $550 | $800 |
| Sliding door glass replacement (per panel) | $350per panel | $650 | $1,100 |
| Pet door cut into glass (per job) | $300per job | $480 | $700 |
| Whole-home reglazing / double glazing | $8,000whole home | $18,000 | $40,000 |
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Getting quotes for glazing work? Get a quote from a verified local tradie - free, no obligation.
Get quotes →Single vs Double Glazing Costs in Australia
Single-glazed (one pane) replacement is the most common job - typically $300-$800 per window in Australia supplied and fitted, rising toward $1,500 for large or specialty glass. Double glazing uses two panes with a sealed gap and costs more: replacing a failed double-glazed unit (IGU) runs $600-$2,000, while retrofitting double glazing into an existing frame is around $550-$1,500 per window. For a whole Australia home, expect $8,000-$40,000+ depending on window count, glass type and frame work.
Glass Types and What They Cost
Float (annealed) glass
The standard, cheapest glass for non-safety windows. Used for most basic pane replacements in Australia.
Toughened (safety) glass
Required by code for doors, low windows and wet areas. Adds roughly 30-60% over float glass.
Laminated glass
Two bonded panes - better security and noise reduction. Common for street-facing Australia windows; a premium over toughened.
Double-glazed (IGU)
Two panes with a sealed air or argon gap for insulation. The most expensive option, but the biggest energy saver.
Emergency and Broken Window Repair in Australia
For a smashed or cracked window, Australia glaziers offer emergency call-outs from $150 (board-ups run $150-$600), which secures the property with temporary glazing. A minor glass repair where the frame is sound can be as little as $100. Permanent replacement is then quoted on the glass type and size. After-hours, weekend and public-holiday call-outs sit at the top of the range. If the property is insecure, most glaziers prioritise a same-day board-up before scheduling the final glass.
Shower Screens, Splashbacks & Mirrors
Beyond windows, Australia glaziers handle bathroom and kitchen glass. A framed shower screen is $400-$1,200 supplied and fitted; frameless screens run $800-$3,000. A toughened glass kitchen splashback costs $450-$1,500 depending on size and whether it is clear, coloured or printed. Wall mirrors are $200-$750 installed.
Energy Efficiency: Is Double Glazing Worth It in Australia?
Double glazing cuts heat loss and outside noise, and can lower Australia heating and cooling bills. At roughly $550-$1,500 per window retrofitted (or $600-$2,000 to replace a failed unit), payback is gradual - it is most worthwhile on large or street-facing windows, in climates with temperature extremes, or as part of a renovation. For a few rooms, secondary glazing or quality furnishings may give better value; for a whole home, double glazing adds comfort and resale appeal.
What Affects Glazier Costs in Australia
Glass type & thickness
Float vs toughened vs laminated vs double-glazed changes the price substantially. Safety glass is mandatory in many locations.
Window size & access
Large panes, upper-storey windows and tricky access in Australia add labour, equipment and sometimes a second glazier.
Emergency vs scheduled
After-hours call-outs and board-ups cost more than a booked, in-hours replacement.
Frame condition
Rotten timber, rusted steel or damaged aluminium frames may need repair before reglazing, adding cost.
Number of windows
Whole-home jobs in Australia attract a per-window discount versus a single call-out.
Custom & coloured glass
Printed splashbacks, frameless screens and custom shapes cost more than standard cut-to-size glass.
How to Save Money on Glazing in Australia
Frequently Asked Questions
Our Methodology
Prices on this page are compiled from publicly available cost guides, leading tradie marketplaces, peak industry body data, and individual tradesperson websites across Australia. We cross-reference ranges from multiple sources and adjust for city-specific cost differences. Our price guides are produced independently and no tradesperson can influence a published figure. All prices are estimates and will vary based on your specific job. Always get multiple quotes. Last reviewed August 2026. Read our full methodology →