How much does a glazier cost in Canberra?
Double glazing is the question most Canberra readers bring to this page. Adding a second pane to a single-glazed frame you already have costs $400–$1,200 per window in our table, replacing a fogged or failed double-glazed unit $300–$1,200, and reglazing a whole house $8,000–$40,000. For a single broken pane, new glass in a single-glazed window is $150–$1,500 and a small repair $120–$500. Canberra falls in NCC climate zone 7, rated cool temperate, and July nights at the airport average -0.1 °C (BOM averages), so glazing here is judged mostly on how well it keeps heat inside.
Comparing cities, or after the Australia-wide picture? See the national guide: Glazier cost in Australia.
Glazier Prices in Canberra 2026: Cost Table and Price List
| Service | Low | Typical | High |
|---|---|---|---|
| Single-pane / minor glass repair | $120per job | $250 | $500 |
| Emergency glass repair / board-up (after-hours) | $150per job | $350 | $600 |
| Single-glazed window glass replacement (glass only) | $150per window | $350 | $1,500 |
| Failed double-glazed unit (IGU) replacement (per window) | $300per window | $600 | $1,200 |
| Retrofit double glazing into single-glazed frames (per window) | $400per window | $750 | $1,200 |
| Glass splashback (supply + install) | $450per job | $850 | $1,500 |
| Framed shower screen (supply + fit) | $400supply+fit | $800 | $1,200 |
| Frameless shower screen (supply + fit) | $800supply+fit | $1,800 | $3,000 |
| Wall / vanity mirror (supply + install) | $200per job | $420 | $750 |
| Glass balustrade (per m) | $350per metre | $550 | $800 |
| Sliding door glass replacement (per panel) | $350per panel | $650 | $1,100 |
| Pet door cut into glass (cat or small–medium dog, new pane included) | $300per job | $480 | $700 |
| Whole-home reglazing / double glazing | $8,000whole home | $18,000 | $40,000 |
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Getting quotes for glazing work in Canberra? Get a quote from a local tradie - free, no obligation.
Get Canberra quotes →Single vs Double Glazing Costs in Canberra
The ACT adopted the 7-star rules on 15 January 2024, and NCC 2025 started 1 May 2026, optional until 1 May 2027. For a new house the ACT calls double glazing cost-effective.
Glass Types and What They Cost
Float (annealed) glass
Float glass: $150–$1,500 to replace a single pane.
Toughened (safety) glass
Glass that could be mistaken for an opening needs a 20 mm opaque band.
Double-glazed (IGU)
A failed sealed unit is $300–$1,200.
Emergency and Broken Window Repair in Canberra
In Canberra a board-up is $150–$600, a minor repair $120–$500.
Shower Screens, Splashbacks & Mirrors
Frameless screens are $800–$3,000, splashbacks $450–$1,500. Bathroom glass below 2.0 m must be safety glass.
Energy Efficiency: Is Double Glazing Worth It in Canberra?
The ACT Government says quality double glazing cuts heating and cooling costs, noise and condensation; it warns skylights can cause extreme heat gains or losses.
Canberra glazing: double glazing window by window, and the climate zone
Double glazing a Canberra home window by window
Retrofitting double glazing is $400–$1,200 a window in our Canberra table, so 12 windows come to $9,000 at the typical price. The table's whole-home reglazing row is $8,000–$40,000, and replacing a failed double-glazed unit $300–$1,200 a window.
Canberra's climate zone
Canberra and Hobart are the two cities of the 15 we cover in zone 7 of the Australian Building Codes Board climate map, cool temperate.
These answers use the prices in the table on this page.
Local figures: Australian Building Codes Board climate zone map (National Construction Code).
What Affects Glazier Costs in Canberra
Retrofit, new unit or new window
A retrofit keeps your existing frames and adds a second layer of glass, at $400–$1,200 a window. The ACT Government says secondary glazing, a sheet of glass or Perspex fitted over the old window, can work well but does not suit every window type, so have the frames checked. Where a double-glazed unit has misted between its panes, only the sealed unit needs replacing, at $300–$1,200.
Frost, heating bills and frames
July in Canberra averages a top of 11.4 °C and a low just under zero (BOM averages). The ACT Government says good double glazing can cut heating and cooling costs and also reduce noise and condensation. The frame counts as much as the glass: standard aluminium is a strong conductor that drags down the insulation of the whole window, so if frames are being replaced, ask whether the aluminium is thermally broken.
Where the Code demands safety glass
The National Construction Code requires Grade A safety glass in doors, and the same human-impact rules reach bathroom and ensuite glass sitting lower than 2 m from the finished floor, bath bottom or shower tray. Any shower panel whose edge is left exposed has to be toughened, 6 mm or thicker. A full-height pane that could be mistaken for an opening needs safety glass and an opaque band at least 20 mm high, unless it is made obvious another way.
Bushfire-prone blocks
On a block in a designated bushfire-prone area, the BAL assessment sets the construction level, glazing included. YourHome notes that single-glazed float glass typically cracks at about 12.5 kW/m² of radiant heat, while toughened glass does better unless burning debris touches it. YourHome lists replacing old panes with laminated or toughened glass among its retrofit options, so ask the glazier what your BAL requires before choosing glass.
Older homes and hidden asbestos
WorkSafe ACT tells renovators to assume that older ACT homes contain asbestos, and a business renovating a home must have a licensed asbestos assessor check any material the work is likely to disturb before starting. Changing glass inside an existing frame rarely touches the walls, but pulling whole frames out of older cladding can, so a whole-house window replacement on an older home should allow time and money for that check.
Showers, splashbacks and skylights
Plenty of glazing work is not windows. Shower screens run $400–$1,200 framed or $800–$3,000 frameless; a glass splashback $450–$1,500; balustrading $350–$800 a metre. ACT Government advice is that in Canberra's climate a skylight or other roof glazing can let in, or leak out, an extreme amount of heat, so weigh that before cutting one in.
Licences and rebates in the ACT
Under ACT law the licensed construction trades are electricians, plumbers, gasfitters, drainers and builders, so a glazier working alone holds no ACT trade licence; check insurance, references and a written quote instead. The ACT Home Energy Support rebates for homeowners list products such as reverse cycle heating and cooling and ceiling insulation, and windows are not among them, so price a glazing job without counting on that rebate.
How to Save Money on Glazier Cost in Canberra
Glazier Cost in Canberra by Job Size
Say a Canberra house has six misted double-glazed units to swap, with the frames left in place. Six units at $300–$1,200 a window come to $1,800–$7,200. Because each window is priced alone, the quote can be staged, so the units in the rooms heated hardest go first and the rest wait.
Winter and frames move a job this size. Frost and heating bills make the thermal break in an aluminium frame worth asking about, since plain aluminium conducts heat. A second pane over the old window can suit some windows but not every type, so the frames are checked before it is priced. A flat adds a check of the building's rules before external glass is changed.
Glazier Cost in Canberra: What the Quote Should Include
Frost and winter heating bills shape Canberra glazing jobs, so a quote should show glass, frame and each window separately. Priced window by window, a homeowner can start with the rooms that are heated hardest and see what the rest would add.
- Each window listed and priced on its own so the work can be staged, a retrofit read against $400–$1,200 a window and a sealed-unit swap against $300–$1,200 a window.
- For a misted double-glazed unit, a note on whether the frame is sound and only the sealed unit is being replaced.
- Frame material stated, and whether any aluminium is thermally broken, since plain aluminium conducts heat through the whole window.
- Secondary glazing, a second sheet of glass or plastic fitted over the old window, offered only after the frames have been checked.
- Any skylight or roof glazing listed apart from the windows, so it is not folded into the window count.
- For a flat or unit, a note that the building's rules on external windows were checked before glass was ordered.
- Any etched mark found on the old glass noted, so the glass type on the quote matches what is in the frame.
- A board-up after a break-in at $150–$600, and whether that charge is credited to the final glass.
- Warranty wording, dates, payment stages and GST in writing, and ask for their licence number and insurance.
Frequently Asked Questions — Glazier Cost in Canberra
Our Methodology
Prices on this page are compiled from publicly available cost guides, leading tradie marketplaces, peak industry body data, and individual tradesperson websites across Australia. We cross-reference ranges from multiple sources and adjust for city-specific cost differences. Our price guides are produced independently and no tradesperson can influence a published figure. All prices are estimates and will vary based on your specific job. Always get multiple quotes. Last reviewed November 2026. Read our full methodology →