Updated November 2026·Independently researched·10 min read
Data cabling in Townsville runs $150–$400 per point
for a Cat6 data point installed, as published by installers - additional points, Cat6A, fibre, patch panels and cabinets below
Installers in Townsville publish $150–$400 for a first Cat6 data point installed, with $250 typical, and $90–$250 for each additional point on the same visit. A Flinders Street law firm adding desks, a Douglas specialist suite and a Bohle freight yard chasing Wi-Fi across a shed all draw on those rows; the comms cabinet, the switch and the length of the runs are what move the total.
+4.9%Data Cabling costs in Townsville are up around 4.9% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical Cat6 data point in Townsville
$250
per point installed, Townsville 2026, as published
Cat6 data point, installed (first point)
$150-$400
Additional data point, same visit
$90-$250
Office fit-out data point at volume (20+ points, run to patch panel)
$180-$400
$150$250$400
Townsville data cabling quotes are built per point. A first Cat6 point installed is $150–$400, each additional point on the same visit $90–$250, a Cat6A point rated for ten-gigabit links $150–$550, and a fit-out of twenty or more points run to a patch panel $180–$400 per point. Behind the points sit a patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800 and a network switch supplied and fitted at $100–$900.
Two Townsville quotes for the same point count differ by the building and the hours. A Flinders Street or Palmer Street tenancy in an older masonry building has runs that are chased or ducted rather than dropped through a ceiling; a Stockland Townsville or Castletown tenancy has the ceiling but the centre's own rules on when the cabler can work; a Garbutt or Mount St John shed has long runs under a high roof, and the registered cabler's hourly rate of $80–$160 is how that distance is priced.
Then come the lines around the points: a Wi-Fi access point cabled and mounted at $150–$650 with the unit itself separate, an NBN, phone or data point relocation at $150–$500 when a Charters Towers Road shop moves its counter, cable certification and the report at $12–$100 per point, and a call-out of $80–$200 where the installer charges one. A fibre run between buildings is $300–$1,000 installed and terminated, with each core terminated or fusion spliced at $60–$220.
Quick answerData cabling in Townsville runs $150–$400 per point for a first Cat6 data point installed in 2026, $90–$250 per point for each additional point on the same visit and $180–$400 per point on an office fit-out of 20 or more points run to a patch panel. Cat6A points cost $150–$550, a patch panel $200–$800 and a wall-mount comms cabinet $380–$1,800. Prices are as published by installers; the GST basis varies. Get free Townsville quotes →
Data Cabling Prices in Townsville 2026: Cost Table and Price List
Service
Low
Typical
High
Cat6 data point, installed (first point)
$150per point
$250
$400
Additional data point, same visit
$90per point
$150
$250
Cat6A data point, installed
$150per point
$300
$550
Office fit-out data point at volume (20+ points, run to patch panel)
$180per point
$250
$400
Fibre optic run, installed and terminated
$300per job
$450
$1,000
Fibre core termination or fusion splice
$60per unit
$110
$220
Patch panel supplied and terminated (12-24 port)
$200per panel
$400
$800
Wall-mount comms cabinet supplied and installed (6-12RU)
$380per unit
$900
$1,800
Wireless access point install (cable run and mount, unit excluded)
$150per point
$300
$650
NBN, phone or data point relocation
$150per job
$300
$500
Cable certification test and report
$12per point
$35
$100
Network switch supplied and fitted
$100per switch
$350
$900
Registered cabler hourly rate
$80per hour
$112
$160
Call-out or minimum attendance, where charged
$80per visit
$150
$200
Scoping data cabling work in Townsville? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Townsville, November 2026.
What does a data point cost in Townsville?$150–$400 per point for a first Cat6 point installed, $250 typical. Each additional point on the same visit costs $90–$250, a Cat6A point $150–$550, and an office fit-out point at volume $180–$400 per point.
What gets added to a Townsville data cabling quote?A patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800, a network switch at $100–$900, a Wi-Fi access point cabled and mounted at $150–$650, cable certification at $12–$100 per point, and a call-out of $80–$200 where the installer charges one.
Worked Data Cabling Cost Scenarios — Townsville
Townsville examples priced from this page's rows: a Palmer Street restaurant, a Douglas specialist suite near the hospital and a Bohle freight yard. Each line names the row it draws on; the quote you receive prices your own building, runs and point count.
Palmer Street restaurant. A restaurant opening on Palmer Street in South Townsville needs a point at the POS counter, one in the office and one at the kitchen printer. The first Cat6 point is $150–$400 ($250 typical) and the other two $90–$250 each on the same visit; the NBN point is moved from the old counter to the office at $150–$500, a ceiling Wi-Fi access point for the floor staff's handhelds is cabled and mounted at $150–$650 with the unit separate, and the small switch behind the counter is supplied and fitted at $100–$900.
Douglas specialist suite. A specialist practice taking rooms in Douglas near Townsville University Hospital cables every consulting room and the reception at $180–$400 per point, typically $250, because the count passes the volume break, with the imaging room in Cat6A at $150–$550 per point. The quote lists the patch panel at $200–$800, the wall-mount cabinet at $380–$1,800 and certification at $12–$100 per point as their own lines, and names the completion statement.
Bohle freight yard. A transport operator at Bohle links the office building to the workshop across the yard with a fibre run at $300–$1,000 installed and terminated, each core at $60–$220, then has access points cabled through the shed at $150–$650 each for scanners on the forklifts. The high-roof runs are priced on the hourly rate of $80–$160 on top of the points, and the quote shows the call-out at $80–$200 because the installer charges one for the second visit.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping data cabling work in Townsville? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Townsville, November 2026.
Data Cabling Costs by Sector in Townsville
Townsville's data cabling work runs from the CBD, Flinders Street and The Strand and the offices of Garbutt and Douglas, through the tenancies at Stockland Townsville, Castletown and Willows, to the sheds of Garbutt, Bohle, Mount St John and Stuart and the Port of Townsville, the hospital and university precinct at Douglas, and the venues of Palmer Street, The Strand and the Magnetic Island ferry precinct.
Offices: the CBD, Garbutt and Douglas - Floors are priced at $180–$400 per point run to a patch panel at $200–$800, with a comms cabinet at $380–$1,800, a switch at $100–$900 and certification at $12–$100 per point; a suite adding a few desks pays $150–$400 for the first point and $90–$250 for each after it.
Health and campus: Townsville University Hospital and James Cook University at Douglas - Consulting rooms and teaching spaces cable every desk, with Cat6A at $150–$550 per point where imaging or lab data moves across the network, access points at $150–$650 each for the open areas, and the completion statement and certification report asked for together.
Retail strips and centres: Flinders Street, Charters Towers Road, Stockland Townsville, Castletown, Willows - A POS counter and back office start at $150–$400 for the first point and $90–$250 for each additional point, with an NBN or phone point relocation at $150–$500 when the counter moves and centre after-hours work priced on the hourly rate of $80–$160.
Industrial and port: Garbutt, Bohle, Mount St John, Stuart, the Port of Townsville - Sheds and yards buy Wi-Fi coverage at $150–$650 per access point, long high-roof runs on the hourly rate of $80–$160, and fibre between buildings at $300–$1,000 per run with cores at $60–$220 each.
Hospitality: Palmer Street, The Strand, the Magnetic Island ferry precinct - Venues cable the counter, the office and the floor: a first point at $150–$400, additional points at $90–$250, access points at $150–$650 each with the units separate, a switch at $100–$900 and a call-out at $80–$200 where the installer charges one for a small add-on visit.
What a Compliant Data Cabling Quote Includes — Cost in Townsville
Before comparing Townsville quotes, check each one prices the same number of points at the same cable grade, says whether the patch panel, cabinet, switch and certification are in or out, names the cabler's registration, and shows the GST basis on every line.
The point count and cable grade - Cat6 at $150–$400 for the first point and $90–$250 for each additional point, or Cat6A at $150–$550 per point - with the run length and ceiling or wall access described
Office fit-outs priced per point at volume, $180–$400 per point for 20 or more points run to a patch panel, with the volume break stated
The patch panel at $200–$800 and the wall-mount comms cabinet at $380–$1,800 as their own lines, with port and rack-unit counts
Network switches at $100–$900 supplied and fitted, with the make and whether it is managed or unmanaged
Wi-Fi access points cabled and mounted at $150–$650 per point, with the unit itself shown separately
Fibre runs at $300–$1,000 installed and terminated and fibre cores at $60–$220 each, with the fibre type and connector named
Cable certification testing and the report at $12–$100 per point, or a nil line where it is included in the point price
The cabler's ACMA registration kind - open, restricted or lift - and the completion statement that the work complies with the Wiring Rules
A single GST basis across every line, the call-out at $80–$200 where charged, and the cabler's ABN and insurance
Data cabling cost in Townsville: CBD offices, Douglas clinics and Bohle sheds
Data cabling cost in Townsville begins at $150–$400 for a first Cat6 point installed (typically $250) and $90–$250 for each additional point on the same visit, and moves to $180–$400 per point once a fit-out passes twenty points run to a patch panel. A Cat6A point at $150–$550 is the ten-gigabit grade; the patch panel at $200–$800, the wall-mount comms cabinet at $380–$1,800 and the switch at $100–$900 are the comms-end lines a Townsville quote should show separately.
The building and the hours fill in the rest. Masonry tenancies on Flinders Street and Palmer Street mean chased or ducted runs, Stockland Townsville and Castletown tenancies mean after-hours work on the hourly rate of $80–$160, and Garbutt, Bohle and Stuart sheds mean long elevated runs and often a fibre link at $300–$1,000 per run with cores at $60–$220 each. Around the points sit Wi-Fi access points at $150–$650 each, point relocations at $150–$500, certification at $12–$100 per point and a call-out of $80–$200 where charged.
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Have the Townsville cabler write the registration kind on the quote and hand the completion statement over with the certification report, so the practice or tenancy has both on file.
Data cabling cost by point count and cable grade in Townsville
Quick answerTownsville pricing steps by point count and grade: a Flinders Street or Charters Towers Road shop sits in the $150–$400 first-point and $90–$250 additional-point bracket, a Douglas or CBD office floor at $180–$400 per point run to a patch panel at $200–$800, and a Bohle or Mount St John shed at $150–$650 per access point with fibre at $300–$1,000 per run between buildings.
A Townsville price moves with the count in steps. The first point carries the visit and the set-up at $150–$400; each additional point on the same visit is $90–$250 because the cabler is already on site; and once a fit-out passes twenty points run to a patch panel the rate becomes $180–$400 per point, with the panel at $200–$800, the cabinet at $380–$1,800 and certification at $12–$100 per point on their own lines. Grade is the other step: Cat6A at $150–$550 per point against Cat6 at $150–$400.
Distance and access are what the count does not show. A Strand cafe with a plasterboard ceiling is a short-run job; a Stuart warehouse is long runs under a high roof, priced on the hourly rate of $80–$160 on top of the points, with access points at $150–$650 each and a switch at $100–$900 to feed them. Between two buildings the run becomes fibre at $300–$1,000 installed and terminated with each core at $60–$220; a moved NBN or phone point at $150–$500 and a call-out at $80–$200 where charged are the small-job lines.
Frequently Asked Questions — Data Cabling Cost in Townsville
What is the price of data cabling in Townsville?
From our Townsville table: $150–$400 per point for a first Cat6 data point installed (typically $250); $90–$250 per point for each additional point on the same visit (typically $150); $180–$400 per point on an office fit-out of 20 or more points (typically $250).
How much does a single data point cost in Townsville?
A first Cat6 data point installed costs $150–$400 in Townsville, with $250 typical, and each additional point on the same visit $90–$250. A masonry tenancy on Flinders Street or Palmer Street sits toward the top of the first-point band because the run is chased or ducted; a Garbutt or Douglas office with a suspended ceiling usually sits lower.
What does an office fit-out data cabling job cost per point in Townsville?
Going by our Townsville table, an office fit-out point at volume - 20 or more points run to a patch panel - costs $180–$400 per point, typically $250, with the patch panel at $200–$800 and the comms cabinet at $380–$1,800 on their own lines. Office floors in the CBD, Garbutt and Douglas and practices near Townsville University Hospital are the usual Townsville buyers, and the quote should state the volume break, the port count on the panel and whether certification at $12–$100 per point is inside the point price.
How much more is Cat6A than Cat6 in Townsville?
A Cat6A data point installed costs $150–$550 on our Townsville table, with $300 typical, against $150–$400 for a first Cat6 point; Cat6A is the grade rated for 10 gigabit links.
Do I need a registered cabler in Townsville?
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Ask a Townsville installer to name the registration kind on the quote and to hand over the completion statement with the invoice; a Douglas practice or a Stockland Townsville tenancy will want it filed beside the certification report.
What does a Townsville data cabler charge per hour?
A registered cabler's hourly rate is $80–$160 on our Townsville table, with $112 typical, and a call-out or minimum attendance of $80–$200 applies where the installer charges one; several installers advertise no call-out fee with fixed per-point pricing.
What does fibre cabling cost in Townsville?
A fibre optic run installed and terminated costs $300–$1,000 in Townsville, with $450 typical, and each fibre core terminated or fusion spliced $60–$220. Bohle, Garbutt and Stuart yards linking an office to a separate shed, the Port of Townsville and the Douglas hospital and university precinct are the usual Townsville fibre buyers; the quote should name the fibre type, the connector and the number of cores terminated.
What do Wi-Fi access points and switches cost to install in Townsville?
A wireless access point cabled and mounted costs $150–$650 per point in Townsville with the unit itself excluded, and a network switch supplied and fitted $100–$900. Bohle and Mount St John warehouses chasing Wi-Fi coverage and venues on Palmer Street and The Strand are the usual Townsville access-point jobs; ask for the unit as its own line and for the switch to be named as managed or unmanaged.
Is cable certification included in a Townsville data cabling quote?
Cable certification testing and the report costs $12–$100 per point on our Townsville table, with $35 typical, and several installers include it in the point price - the quote should say which. Under the Telecommunications (Cabling Provider) Rules 2025 the cabler must hold the right kind of registration - lift, open or restricted - or work under a supervisor who accepts full responsibility, and must give the customer a completion statement that the work complies fully with the Wiring Rules and keep a copy for at least one year. A Townsville fit-out usually bundles certification with the patch panel at $200–$800 and the cabinet at $380–$1,800; ask for the test result per point, not just a pass.