Updated November 2026·Independently researched·10 min read
Data cabling in Darwin runs $150–$400 per point
for a Cat6 data point installed, as published by installers - additional points, Cat6A, fibre, patch panels and cabinets below
A first Cat6 data point in Darwin costs $150–$400 installed, $250 typical, with each further point on the same visit at $90–$250. A Casuarina medical suite cabling its consulting rooms with Cat6A prices the points at $150–$550 each, and a Winnellie transport yard adding Wi-Fi across the shed pays $150–$650 per access point for the cable and mount.
+4.7%Data Cabling costs in Darwin are up around 4.7% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical Cat6 data point in Darwin
$250
per point installed, Darwin 2026, as published
Cat6 data point, installed (first point)
$150-$400
Additional data point, same visit
$90-$250
Office fit-out data point at volume (20+ points, run to patch panel)
$180-$400
$150$250$400
Data cabling in Darwin and Palmerston is priced by the point, with the comms hardware on its own lines: $150–$400 for a first Cat6 point installed, $90–$250 for each additional point on the same visit, $150–$550 for Cat6A and $180–$400 per point on an office fit-out of twenty or more points run to a patch panel. The patch panel is $200–$800 supplied and terminated, a wall-mount comms cabinet $380–$1,800, and a network switch $100–$900.
Two Darwin quotes for the same point count diverge on access and distance. A CBD floor with a ceiling grid and a riser cables quickly; a Mitchell Street venue with a fitted ceiling over the bar, or an East Arm shed where every run goes from a cabinet at the office end to the far dock, puts hours on the $80–$160 rate. A fibre run between buildings is $300–$1,000 installed and terminated, with each core at $60–$220.
The last lines decide whether the quote is the whole price: certification at $12–$100 per point or a nil line where it is bundled, an NBN or phone point relocation at $150–$500, and a call-out of $80–$200 where the installer charges one against the fixed per-point pricing others advertise. The quote should show the GST basis on every line and the cabler's registration.
Quick answerData cabling in Darwin runs $150–$400 per point for a first Cat6 data point installed in 2026, $90–$250 per point for each additional point on the same visit and $180–$400 per point on an office fit-out of 20 or more points run to a patch panel. Cat6A points cost $150–$550, a patch panel $200–$800 and a wall-mount comms cabinet $380–$1,800. Prices are as published by installers; the GST basis varies. Get free Darwin quotes →
Data Cabling Prices in Darwin 2026: Cost Table and Price List
Service
Low
Typical
High
Cat6 data point, installed (first point)
$150per point
$250
$400
Additional data point, same visit
$90per point
$150
$250
Cat6A data point, installed
$150per point
$300
$550
Office fit-out data point at volume (20+ points, run to patch panel)
$180per point
$250
$400
Fibre optic run, installed and terminated
$300per job
$450
$1,000
Fibre core termination or fusion splice
$60per unit
$110
$220
Patch panel supplied and terminated (12-24 port)
$200per panel
$400
$800
Wall-mount comms cabinet supplied and installed (6-12RU)
$380per unit
$900
$1,800
Wireless access point install (cable run and mount, unit excluded)
$150per point
$300
$650
NBN, phone or data point relocation
$150per job
$300
$500
Cable certification test and report
$12per point
$35
$100
Network switch supplied and fitted
$100per switch
$350
$900
Registered cabler hourly rate
$80per hour
$112
$160
Call-out or minimum attendance, where charged
$80per visit
$150
$200
Scoping data cabling work in Darwin? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Darwin and Palmerston, November 2026.
What does a data point cost in Darwin?$150–$400 per point for a first Cat6 point installed, $250 typical. Each additional point on the same visit costs $90–$250, a Cat6A point $150–$550, and an office fit-out point at volume $180–$400 per point.
What gets added to a Darwin data cabling quote?A patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800, a network switch at $100–$900, a Wi-Fi access point cabled and mounted at $150–$650, cable certification at $12–$100 per point, and a call-out of $80–$200 where the installer charges one.
Worked Data Cabling Cost Scenarios — Darwin
Darwin examples priced from this page's rows: a Palmerston allied health suite, an East Arm transport depot and a Mitchell Street bar and kitchen. Each names the row it draws on; your quote prices your own point count, run lengths and ceiling access.
Palmerston allied health suite. A physiotherapy and podiatry practice fitting out a Palmerston suite orders Cat6A points at $150–$550 each ($300 typical) for the treatment rooms and reception, a patch panel at $200–$800 in a wall-mount cabinet at $380–$1,800, a switch at $100–$900, two ceiling access points at $150–$650 each and a certification report at $12–$100 per point for the practice's IT provider.
East Arm transport depot. A freight operator with an office block and a workshop at East Arm links the two by a fibre run at $300–$1,000 ($450 typical) with cores terminated at $60–$220 each, cables the workshop and yard for scanner Wi-Fi at $150–$650 per access point, runs twenty-four office points at the volume rate of $180–$400 per point, and has the long runs across the workshop ceiling priced at the hourly rate of $80–$160.
Mitchell Street bar and kitchen. A venue refitting on Mitchell Street has a first Cat6 point run to the main till at $150–$400, four more on the same visit at $90–$250 each for the second till, the kitchen screen and the office, the NBN box relocated from the storeroom to the office at $150–$500, the work booked for a closed morning, and the call-out of $80–$200 shown or struck out on the quote.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping data cabling work in Darwin? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Darwin and Palmerston, November 2026.
Data Cabling Costs by Sector in Darwin
Darwin's cabling work runs from the CBD, Mitchell Street and the waterfront, through the office addresses of the CBD, Casuarina and Palmerston and the strips of Smith Street Mall, Parap and Nightcliff, to the centres at Casuarina Square, Gateway Palmerston and Darwin Waterfront and the industrial areas of Winnellie, Berrimah, East Arm and Pinelands.
Office tenancies: the CBD, Casuarina, Palmerston - Fit-outs of twenty or more points go at $180–$400 per point run to a patch panel at $200–$800, with the cabinet at $380–$1,800 and the switch at $100–$900 on their own lines; ask whether certification at $12–$100 per point is in the point price.
Industrial yards: Winnellie, Berrimah, East Arm, Pinelands - Shed Wi-Fi at $150–$650 per access point and the long runs behind it at $80–$160 set the price, with a second building on the lot linked by fibre at $300–$1,000 per run and $60–$220 per core; ask how the section between buildings is run and protected.
Venues: Mitchell Street, the waterfront, Cullen Bay - A bar or restaurant needs a first point at $150–$400 for the till and more at $90–$250 for the kitchen screen and the office, often with the NBN box moved to the office at $150–$500; work booked outside trading hours goes on the hourly rate.
Shopping centres and strips: Casuarina Square, Gateway Palmerston, Darwin Waterfront, Smith Street Mall, Parap, Nightcliff - Shop tenancies price per point - $150–$400 first, $90–$250 additional - and the quote should say whether the centre's access window pushes the work after hours at $80–$160 and whether a call-out of $80–$200 applies.
Clinics and schools across Darwin and Palmerston - A medical or dental suite in Casuarina or Palmerston, or a school anywhere from Nightcliff to Palmerston, specifies Cat6A at $150–$550 for rooms that will carry imaging or many devices and a certification report at $12–$100 per point; a clinic on a shared floor adds a lockable cabinet at $380–$1,800.
What a Compliant Data Cabling Quote Includes — Cost in Darwin
Before comparing Darwin quotes, check each one prices the same number of points at the same cable grade, says whether the patch panel, cabinet, switch and certification are in or out, names the cabler's registration, and shows the GST basis on every line.
The point count and cable grade - Cat6 at $150–$400 for the first point and $90–$250 for each additional point, or Cat6A at $150–$550 per point - with the run length and ceiling or wall access described
Office fit-outs priced per point at volume, $180–$400 per point for 20 or more points run to a patch panel, with the volume break stated
The patch panel at $200–$800 and the wall-mount comms cabinet at $380–$1,800 as their own lines, with port and rack-unit counts
Network switches at $100–$900 supplied and fitted, with the make and whether it is managed or unmanaged
Wi-Fi access points cabled and mounted at $150–$650 per point, with the unit itself shown separately
Fibre runs at $300–$1,000 installed and terminated and fibre cores at $60–$220 each, with the fibre type and connector named
Cable certification testing and the report at $12–$100 per point, or a nil line where it is included in the point price
The cabler's ACMA registration kind - open, restricted or lift - and the completion statement that the work complies with the Wiring Rules
A single GST basis across every line, the call-out at $80–$200 where charged, and the cabler's ABN and insurance
Data cabling cost in Darwin: suites, sheds and venues
Data cabling cost in Darwin rests on the point price: $150–$400 for a first Cat6 point installed (typically $250), $90–$250 for each additional point on the same visit, $150–$550 for Cat6A and $180–$400 per point once a fit-out passes twenty points run to a patch panel. Fibre between buildings is $300–$1,000 per run with cores at $60–$220 each, and a Wi-Fi access point is $150–$650 to cable and mount with the unit excluded.
Access and distance write the rest of a Darwin quote. A CBD floor with a ceiling grid keeps the runs inside the point price; a Parap shopfront with a fitted ceiling or a Berrimah shed with the cabinet at one end puts hours on the $80–$160 rate. The fixed lines are the patch panel at $200–$800, the comms cabinet at $380–$1,800, the switch at $100–$900, certification at $12–$100 per point, an NBN or phone point relocation at $150–$500 and a call-out of $80–$200 where charged.
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Ask the Darwin cabler to show the registration on the quote and to hand over the completion statement and the test results with the invoice, on a Palmerston suite as much as an East Arm shed.
Data cabling cost by point count and cable grade in Darwin
Quick answerDarwin pricing steps by point count: a Parap or Nightcliff shop at $150–$400 for the first point and $90–$250 for each after it, a CBD or Casuarina floor at $180–$400 per point past twenty points, and a Winnellie or East Arm yard with two buildings at $300–$1,000 for the fibre between them.
Point count steps a Darwin price rather than sliding it. A few points are priced at $150–$400 for the first and $90–$250 for each additional on the same visit, so a Cullen Bay cafe pays most for the first run; from twenty points the office rate of $180–$400 per point applies and the patch panel at $200–$800 and cabinet at $380–$1,800 are fixed lines shared across the floor. Ask where the installer sets the volume break before fixing the count.
Grade and distance step it again. Cat6A at $150–$550 over Cat6 at $150–$400 buys ten-gigabit headroom for an imaging room or a dense floor; a Pinelands or Berrimah lot with an office and a workshop apart links them by fibre at $300–$1,000 per run and $60–$220 per core rather than a long copper run. Wi-Fi is per position at $150–$650, and the switch at $100–$900 is sized by port count to what it serves.
Frequently Asked Questions — Data Cabling Cost in Darwin
What is the price of data cabling in Darwin?
From our Darwin table: $150–$400 per point for a first Cat6 data point installed (typically $250); $90–$250 per point for each additional point on the same visit (typically $150); $180–$400 per point on an office fit-out of 20 or more points (typically $250).
How much does a single data point cost in Darwin?
A first Cat6 data point installed costs $150–$400 in Darwin, with $250 typical, and each additional point on the same visit $90–$250. A single point in a Darwin shop or suite usually covers the run and the outlet; the quote should say whether the NBN box needs to move at $150–$500 and whether a call-out of $80–$200 is charged.
What does an office fit-out data cabling job cost per point in Darwin?
Going by our Darwin table, an office fit-out point at volume - 20 or more points run to a patch panel - costs $180–$400 per point, typically $250, with the patch panel at $200–$800 and the comms cabinet at $380–$1,800 on their own lines. CBD, Casuarina and Palmerston floors are the usual Darwin buyers; ask for the volume break, the patch panel port count and whether the switch at $100–$900 and certification at $12–$100 per point sit inside the per-point price.
How much more is Cat6A than Cat6 in Darwin?
A Cat6A data point installed costs $150–$550 on our Darwin table, with $300 typical, against $150–$400 for a first Cat6 point; Cat6A is the grade rated for 10 gigabit links.
Do I need a registered cabler in Darwin?
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. In Darwin and Palmerston ask for the cabler's registration on the quote before the work starts and the completion statement with the test results at the end; ask too how any run between buildings will be protected from the weather, and that the method is written on the quote.
What does a Darwin data cabler charge per hour?
A registered cabler's hourly rate is $80–$160 on our Darwin table, with $112 typical, and a call-out or minimum attendance of $80–$200 applies where the installer charges one; several installers advertise no call-out fee with fixed per-point pricing.
What does fibre cabling cost in Darwin?
A fibre optic run installed and terminated costs $300–$1,000 in Darwin, with $450 typical, and each fibre core terminated or fusion spliced $60–$220. Fibre in Darwin is usually a Winnellie, Berrimah or East Arm job linking an office to a workshop or a second shed; the quote should name the fibre type, the connector, the route between the buildings and the number of cores at $60–$220 each.
What do Wi-Fi access points and switches cost to install in Darwin?
A wireless access point cabled and mounted costs $150–$650 per point in Darwin with the unit itself excluded, and a network switch supplied and fitted $100–$900. Yards in Winnellie and East Arm and open floors in the CBD and Casuarina are the usual Darwin buyers of access point cabling at $150–$650; ask for the coverage plan the positions came from and whether the switch at $100–$900 powers them.
Is cable certification included in a Darwin data cabling quote?
Cable certification testing and the report costs $12–$100 per point on our Darwin table, with $35 typical, and several installers include it in the point price - the quote should say which. Under the Telecommunications (Cabling Provider) Rules 2025 the cabler must hold the right kind of registration - lift, open or restricted - or work under a supervisor who accepts full responsibility, and must give the customer a completion statement that the work complies fully with the Wiring Rules and keep a copy for at least one year. Ask for the per-point results as a file with the completion statement on any Darwin fit-out, not a line on the invoice that says tested.