Updated November 2026·Independently researched·10 min read
Data cabling in Melbourne runs $150–$400 per point
for a Cat6 data point installed, as published by installers - additional points, Cat6A, fibre, patch panels and cabinets below
Installers in Melbourne publish $150–$400 for a first Cat6 data point, with $250 typical, and $90–$250 for each point added on the same visit. A Cremorne studio cabling its whole floor to a patch panel sees $180–$400 per point at volume, while a Lygon Street Carlton restaurant that needs its NBN point brought through to the kitchen office pays $150–$500.
+4.6%Data Cabling costs in Melbourne are up around 4.6% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical Cat6 data point in Melbourne
$250
per point installed, Melbourne 2026, as published
Cat6 data point, installed (first point)
$150-$400
Additional data point, same visit
$90-$250
Office fit-out data point at volume (20+ points, run to patch panel)
$180-$400
$150$250$400
Melbourne data cabling is sold per point and per piece of hardware. The points run $150–$400 for the first Cat6 point installed, $90–$250 for each additional point on the same visit, $150–$550 for a Cat6A point and $180–$400 per point once an office fit-out passes 20 points run to a patch panel. The hardware runs $200–$800 for a patch panel supplied and terminated, $380–$1,800 for a wall-mount comms cabinet and $100–$900 for a network switch supplied and fitted.
Two Melbourne quotes for the same floor plan diverge on access. A Docklands or Hoddle Grid tower has a suspended ceiling and a riser, so the cabler pulls the runs in a day; a Smith Street Collingwood shop or a Bridge Road Richmond terrace has lath-and-plaster walls, a bluestone rear and a verandah ceiling, and every point there sits closer to the top of $150–$400. In a Dandenong South or Laverton North shed the question is height - each Wi-Fi access point cabled and mounted at $150–$650 needs a lift to reach the purlins.
Then come the lines that a per-point price does not cover. Cable certification and the report at $12–$100 per point is bundled by some Melbourne installers and itemised by others; a fibre optic run at $300–$1,000 installed and terminated links a St Kilda Road building's basement comms room to the floor above its copper reach, with cores at $60–$220 each; and the hourly rate of $80–$160 plus a call-out of $80–$200, where charged, prices the fault-finding that no table can.
Quick answerData cabling in Melbourne runs $150–$400 per point for a first Cat6 data point installed in 2026, $90–$250 per point for each additional point on the same visit and $180–$400 per point on an office fit-out of 20 or more points run to a patch panel. Cat6A points cost $150–$550, a patch panel $200–$800 and a wall-mount comms cabinet $380–$1,800. Prices are as published by installers; the GST basis varies. Get free Melbourne quotes →
Data Cabling Prices in Melbourne 2026: Cost Table and Price List
Service
Low
Typical
High
Cat6 data point, installed (first point)
$150per point
$250
$400
Additional data point, same visit
$90per point
$150
$250
Cat6A data point, installed
$150per point
$300
$550
Office fit-out data point at volume (20+ points, run to patch panel)
$180per point
$250
$400
Fibre optic run, installed and terminated
$300per job
$450
$1,000
Fibre core termination or fusion splice
$60per unit
$110
$220
Patch panel supplied and terminated (12-24 port)
$200per panel
$400
$800
Wall-mount comms cabinet supplied and installed (6-12RU)
$380per unit
$900
$1,800
Wireless access point install (cable run and mount, unit excluded)
$150per point
$300
$650
NBN, phone or data point relocation
$150per job
$300
$500
Cable certification test and report
$12per point
$35
$100
Network switch supplied and fitted
$100per switch
$350
$900
Registered cabler hourly rate
$80per hour
$112
$160
Call-out or minimum attendance, where charged
$80per visit
$150
$200
Scoping data cabling work in Melbourne? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Melbourne metro, November 2026.
What does a data point cost in Melbourne?$150–$400 per point for a first Cat6 point installed, $250 typical. Each additional point on the same visit costs $90–$250, a Cat6A point $150–$550, and an office fit-out point at volume $180–$400 per point.
What gets added to a Melbourne data cabling quote?A patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800, a network switch at $100–$900, a Wi-Fi access point cabled and mounted at $150–$650, cable certification at $12–$100 per point, and a call-out of $80–$200 where the installer charges one.
Worked Data Cabling Cost Scenarios — Melbourne
Three Melbourne jobs priced from this page's rows: a Cremorne software office, a Lygon Street Carlton restaurant and a Truganina cold-store warehouse. Each line names the row behind it; your own quote prices your ceiling, your walls and your run lengths.
Cremorne software office. A software company moving into a converted Cremorne factory floor cables its desks at $180–$400 per point ($250 typical) with Cat6A at $150–$550 to the server rack and the uplinks, lands everything on a patch panel at $200–$800 inside a wall-mount cabinet at $380–$1,800, fits a managed switch at $100–$900, cables ceiling access points at $150–$650 each with the units on a separate line, and pays $12–$100 per point for certification so the landlord's make-good clause has a test report behind it.
Lygon Street Carlton restaurant. A restaurant refitting a Lygon Street tenancy needs a point at the pass for the POS and one in the office upstairs, priced at $150–$400 for the first and $90–$250 for the second, has the NBN point relocated from the front window to the office at $150–$500, and adds one access point at $150–$650 for table ordering on the floor; the installer's call-out of $80–$200 is shown and then credited against the job.
Truganina cold-store warehouse. A cold-storage operator in Truganina with no Wi-Fi past the first aisle has a fibre optic run installed and terminated at $300–$1,000 from the office to a second cabinet at the far wall, with cores fusion spliced at $60–$220 each, access points cabled and mounted down the aisles at $150–$650 per point, and a half day at the registered cabler's hourly rate of $80–$160 to trace and relabel the existing runs.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping data cabling work in Melbourne? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Melbourne metro, November 2026.
Data Cabling Costs by Sector in Melbourne
Melbourne's data cabling buyers sit in the Hoddle Grid and Docklands towers, the offices of St Kilda Road, Cremorne and Box Hill, the clinics and shops of Chapel Street Prahran, Bridge Road Richmond and Lygon Street Carlton, the sheds of Dandenong South, Laverton North, Truganina and Campbellfield, and the venues of Southbank, St Kilda and Fitzroy.
Tech and creative offices: Cremorne, Docklands, St Kilda Road - Fit-outs past 20 points run to a patch panel at $180–$400 per point, Cat6A at $150–$550 for the uplinks, a patch panel at $200–$800, a cabinet at $380–$1,800, a switch at $100–$900 and certification at $12–$100 per point for the make-good file.
Specialist suites and clinics: Box Hill, Bridge Road Richmond, Chapel Street - A first point at $150–$400 and additional points at $90–$250 across the consulting rooms, a relocation at $150–$500 when the suite inherits the previous tenant's NBN position, and after-hours booking so the practice keeps its clinic days.
Distribution centres: Dandenong South, Laverton North, Truganina, Campbellfield - Access points cabled and mounted at $150–$650 each down the aisles, a fibre optic run at $300–$1,000 to the far end of the shed with cores at $60–$220 each, and a lift line for the height of the purlins.
Hospitality and centre retail: Southbank, Chadstone, Highpoint, Westfield Doncaster - A POS point and a back-office point at $150–$400 then $90–$250, an access point at $150–$650 for the floor, and centre or venue after-hours access priced at the hourly rate of $80–$160.
Laneway studios and strip shops: Smith Street Collingwood, Fitzroy, St Kilda - Old walls and verandah ceilings where a single run from the NBN box to the counter is $150–$500, a first point sits toward the top of $150–$400 and the call-out of $80–$200 applies where the installer charges one.
What a Compliant Data Cabling Quote Includes — Cost in Melbourne
Before comparing Melbourne quotes, check each one prices the same number of points at the same cable grade, says whether the patch panel, cabinet, switch and certification are in or out, names the cabler's registration, and shows the GST basis on every line.
The point count and cable grade - Cat6 at $150–$400 for the first point and $90–$250 for each additional point, or Cat6A at $150–$550 per point - with the run length and ceiling or wall access described
Office fit-outs priced per point at volume, $180–$400 per point for 20 or more points run to a patch panel, with the volume break stated
The patch panel at $200–$800 and the wall-mount comms cabinet at $380–$1,800 as their own lines, with port and rack-unit counts
Network switches at $100–$900 supplied and fitted, with the make and whether it is managed or unmanaged
Wi-Fi access points cabled and mounted at $150–$650 per point, with the unit itself shown separately
Fibre runs at $300–$1,000 installed and terminated and fibre cores at $60–$220 each, with the fibre type and connector named
Cable certification testing and the report at $12–$100 per point, or a nil line where it is included in the point price
The cabler's ACMA registration kind - open, restricted or lift - and the completion statement that the work complies with the Wiring Rules
A single GST basis across every line, the call-out at $80–$200 where charged, and the cabler's ABN and insurance
Data cabling cost in Melbourne: studios, suites and distribution sheds
Data cabling cost in Melbourne begins at $150–$400 for a first Cat6 data point installed (typically $250) and $90–$250 for each additional point on the same visit, and drops per point to $180–$400 once a fit-out passes 20 points run to a patch panel. Cat6A, rated for 10 gigabit links, is $150–$550 per point; a fibre optic run is $300–$1,000 installed and terminated with each core at $60–$220.
The fabric of the building sets the rest of a Melbourne price. A Docklands or Hoddle Grid floor with a riser and a ceiling grid keeps the runs short; a Collingwood or Richmond terrace means plaster, bluestone and surface conduit; a Campbellfield or Laverton North shed means height. Around the points sit the patch panel at $200–$800, the comms cabinet at $380–$1,800, the switch at $100–$900, access points at $150–$650 each with the units separate, certification at $12–$100 per point, and a call-out of $80–$200 where one is charged.
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Have the Melbourne cabler write the registration kind on the quote and hand the completion statement over with the certification report, not after the invoice.
Data cabling cost by point count and cable grade in Melbourne
Quick answerMelbourne pricing steps by point count: a Chapel Street Prahran shop or a Box Hill suite sits in the $150–$400 first-point and $90–$250 additional-point bracket, a Cremorne or St Kilda Road floor lands at $180–$400 per point once it passes 20 points to a patch panel, and a Dandenong South shed adds $150–$650 per access point and $300–$1,000 per fibre run to reach the far wall.
Count is the first lever on a Melbourne quote. The first point carries the visit and the set-up at $150–$400; every point after it on the same day is $90–$250; and past 20 points run to a patch panel the price settles at $180–$400 per point, which is where a Box Hill or St Kilda Road floor sits. Grade stacks on top: Cat6A at $150–$550 for the uplinks and the imaging room against Cat6 for the desks, with certification at $12–$100 per point either inside the point price or on its own line.
Distance and height are the second lever. An access point on the purlins of a Truganina or Campbellfield shed is $150–$650 to cable and mount before the unit, and a fibre optic run at $300–$1,000 with cores at $60–$220 each takes over where copper runs out. The hardware scales with the count: a patch panel at $200–$800 and a cabinet at $380–$1,800 for a floor, a switch at $100–$900, and for one point moved in a Fitzroy cafe only the relocation at $150–$500 plus, where charged, the call-out of $80–$200.
Frequently Asked Questions — Data Cabling Cost in Melbourne
What is the price of data cabling in Melbourne?
From our Melbourne table: $150–$400 per point for a first Cat6 data point installed (typically $250); $90–$250 per point for each additional point on the same visit (typically $150); $180–$400 per point on an office fit-out of 20 or more points (typically $250).
How much does a single data point cost in Melbourne?
A first Cat6 data point installed costs $150–$400 in Melbourne, with $250 typical, and each additional point on the same visit $90–$250. A Bridge Road Richmond terrace or a Smith Street Collingwood shop with plaster walls and a long run to the NBN box sits toward the top of that band; a Docklands floor with a ceiling grid sits toward the bottom, and the call-out of $80–$200 applies only where the installer charges one.
What does an office fit-out data cabling job cost per point in Melbourne?
Going by our Melbourne table, an office fit-out point at volume - 20 or more points run to a patch panel - costs $180–$400 per point, typically $250, with the patch panel at $200–$800 and the comms cabinet at $380–$1,800 on their own lines. Cremorne, St Kilda Road and Box Hill tenants are the usual Melbourne buyers, and the quote should list the switch at $100–$900, the access points at $150–$650 each and certification at $12–$100 per point separately from the points.
How much more is Cat6A than Cat6 in Melbourne?
A Cat6A data point installed costs $150–$550 on our Melbourne table, with $300 typical, against $150–$400 for a first Cat6 point; Cat6A is the grade rated for 10 gigabit links.
Do I need a registered cabler in Melbourne?
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. In Melbourne ask the installer to write the registration kind on the quote and to hand over the completion statement with the test report; a landlord's make-good clause is easier to close with both in the file.
What does a Melbourne data cabler charge per hour?
A registered cabler's hourly rate is $80–$160 on our Melbourne table, with $112 typical, and a call-out or minimum attendance of $80–$200 applies where the installer charges one; several installers advertise no call-out fee with fixed per-point pricing.
What does fibre cabling cost in Melbourne?
A fibre optic run installed and terminated costs $300–$1,000 in Melbourne, with $450 typical, and each fibre core terminated or fusion spliced $60–$220. Melbourne fibre jobs are mostly building-to-building or across a shed - a St Kilda Road basement to an upper floor, or the far wall of a Laverton North warehouse - and the quote should name the fibre type, the connector and whether cores are terminated or fusion spliced.
What do Wi-Fi access points and switches cost to install in Melbourne?
A wireless access point cabled and mounted costs $150–$650 per point in Melbourne with the unit itself excluded, and a network switch supplied and fitted $100–$900. Dandenong South and Truganina sheds and Southbank venues are the usual Melbourne buyers of access point cabling, and the quote should show the unit, the mount height and any lift as separate lines, with the hourly rate of $80–$160 covering anything outside the fixed price.
Is cable certification included in a Melbourne data cabling quote?
Cable certification testing and the report costs $12–$100 per point on our Melbourne table, with $35 typical, and several installers include it in the point price - the quote should say which. Under the Telecommunications (Cabling Provider) Rules 2025 the cabler must hold the right kind of registration - lift, open or restricted - or work under a supervisor who accepts full responsibility, and must give the customer a completion statement that the work complies fully with the Wiring Rules and keep a copy for at least one year. A Melbourne fit-out usually bundles the certification with the patch panel at $200–$800; ask for the report by port number so it matches the labels on the panel.