How much does commercial flooring cost in Melbourne?
Commercial flooring across Melbourne runs $32–$135 per m², starting with commercial vinyl and climbing to ground-and-polished concrete. Product grade sets the opening figure, then building access, slab condition and whether the work must happen overnight push a quote up or down.
The city's floors range from carpet-tiled office towers in the CBD and Docklands to polished concrete in old factories turned offices in Collingwood and Brunswick, and coated slabs across the logistics belt at Dandenong South, Truganina and Laverton North. Hospitality strips such as Lygon Street and Chapel Street want kitchen-grade safety vinyl or epoxy, and older timber or brick buildings often hide uneven bases.
Removal and preparation are listed apart from the finish: lifting old flooring costs $7.30–$23 per m² and screed $23–$55 per m², with $42 per m² a typical prep figure. All figures include GST.
Commercial Flooring Prices in Melbourne 2026: Cost Table and Price List
| Service | Low | Typical | High |
|---|---|---|---|
| Moisture testing (measure and quote usually free) | $185per job | $320 | $455 |
| Commercial vinyl & safety vinyl (supply + install) | $32per m² | $55 | $83 |
| Vinyl plank / LVT (supply + install) | $50per m² | $77 | $100 |
| Carpet tile (supply + install) | $37per m² | $68 | $100 |
| Broadloom / commercial carpet (supply + install) | $37per m² | $68 | $100 |
| Epoxy floor coating system (supply + install) | $27per m² | $64 | $82 |
| Polished concrete (grind & seal) | $46per m² | $91 | $135 |
| Anti-slip treatment or coating (existing floor) | $27per m² | $51 | $92 |
| Subfloor prep & floor levelling / screed | $23per m² | $42 | $55 |
| Removal & disposal of old floor | $7.30per m² | $14 | $23 |
| Line marking on floors | $3per metre | $8 | $14 |
| After-hours / weekend install loading (300 sqm commercial vinyl install) | $1,650per project | $2,000 | $2,650 |
| Anti-static (ESD) floor system (supply + install) | $55per m² | $87 | $115 |
| Timber floor sanding & refinishing (commercial) | $27per m² | $41 | $55 |
Build your estimate
Put a quantity against the items your job needs. The figures are this page’s prices for Melbourne.
You're in.
A local installer will be in touch about your job. No spam, no call centre.
Scoping commercial flooring work in Melbourne? Get a quote from a local commercial contractor - free, no obligation.
Get Melbourne quotes →Prices include GST. Melbourne metro, November 2026.
Commercial Flooring Costs by Sector in Melbourne
CBD, Docklands and Southbank office floors
Office floors in the Melbourne CBD, Docklands and Southbank turn over at lease end, and carpet tile at $37–$100 per m² is the usual replacement because single damaged tiles can be swapped later. Removing the old floor adds $7.30–$23 per m², more where heavy glue is stuck to the slab.
Strip shops in South Yarra, St Kilda and Brunswick
Victorian-era shopfronts along Chapel Street, Acland Street and Sydney Road often sit on old timber boards or patched slabs. Sound boards can be sanded and refinished at $27–$55 per m². For vinyl plank at $50–$100 per m², plan on levelling at $23–$55 per m² first, or every dip and board edge telegraphs through within months.
Parkville health, research and university buildings
The Parkville hospital and biomedical precinct and the Carlton university buildings use sheet safety vinyl in wards, corridors and wet rooms at $32–$83 per m². Laboratories and equipment rooms that need static control move to an anti-static floor system at $55–$115 per m².
Western and south-east distribution centres
Big sheds in Truganina, Derrimut, Laverton North and Dandenong South are coated at $27–$82 per m² for forklift wear and easy sweeping. Cold Melbourne winters slow epoxy curing on unheated slabs, so installers often program coating work for the warmer months or bring heaters onto the job.
What Melbourne Commercial Flooring Jobs Actually Cost
Docklands office floor relaid in carpet tile
A 1,000 m² Docklands floor with the old tiles lifted at $7.30–$23 per m² and new carpet tile at $37–$100 per m². Tenants staying in place usually have the work staged in zones overnight, with furniture moved out and returned each shift. Night-shift loadings and furniture moves are quoted on top.
Brunswick warehouse conversion levelled for vinyl plank
A converted Brunswick warehouse office of about 220 m², where the uneven slab is ground and screeded at $23–$55 per m² before vinyl plank goes down at $50–$100 per m². In older brick shells the levelling often sets the finish date more than the plank does.
Carlton restaurant kitchen in safety vinyl
A 60 m² commercial kitchen behind a Carlton restaurant: old tiles out at $7.30–$23 per m², a slab moisture test at $185–$455, then safety vinyl at $32–$83 per m² laid right under the benches. Many restaurants already close on Monday and Tuesday, which suits the work. Lifting tiles can leave the slab uneven, and any levelling is quoted on top.
Truganina distribution centre epoxy and line marking
A 3,000 m² distribution centre slab coated at $27–$82 per m², plus 1,500 metres of racking aisles, pedestrian walkways and loading-dock lines at $3–$14 per metre. Large western-suburbs sheds are usually done bay by bay so stock keeps moving.
Aged-care wing resheeted over a weekend
A 300 m² aged-care wing in Melbourne's south-east, with tired vinyl removed at $7.30–$23 per m² and new safety vinyl at $32–$83 per m², plus the $1,650–$2,650 loading the table sets for a 300 m² weekend vinyl install. Residents are moved room by room.
Get a commercial flooring quote in Melbourne
Commercial contractors · Free quotes. No obligation, no spam.
What Affects Commercial Flooring Costs in Melbourne
Melbourne commercial flooring prices are pulled in different directions by the city's building stock. CBD and Docklands towers, converted warehouses in Richmond, Collingwood and Brunswick, Chapel Street and Carlton shopfronts, and distribution centres in Dandenong South and Laverton North each come with their own slabs, access rules and product choices. These are the main drivers.
Tower access and dock bookings
CBD and Docklands buildings usually require booked loading docks, goods lifts and after-hours work on occupied floors. Moving material through shared lifts and protecting common areas slows each shift.
Warehouse conversions
Converted factories in Richmond, Collingwood and Brunswick often have old, uneven slabs or timber floors. Grinding, levelling or sheeting before the new floor can cost more than the finish itself.
Polished concrete fit-outs
Polished and honed concrete suits hospitality venues and creative offices, but the result depends on the slab. Typical rates are $46–$135 per m², with patched or damaged slabs sitting at the higher end.
Cold, changeable weather
Cold winters and changeable conditions slow adhesive and screed curing in unheated buildings. Heating the space or waiting for suitable conditions can extend the program by days.
Strip retail trading hours
Shops along Chapel Street, Lygon Street and in shopping centres need overnight installs so trading continues. Night loadings and staged laying increase labour costs over a daytime job.
Distribution centre floors
Large warehouses in the south-east and west need epoxy coatings and line marking for forklifts and racking. Scale lowers per-m² rates, but slab repairs and joint filling add to the total.
How to Control Commercial Flooring Costs in Melbourne
Commercial flooring cost by floor area in Melbourne
The gap between a Brunswick shopfront and a full Docklands floor is wide, and the rate per m² tends to ease on larger areas as setup is shared. A 400 m² Richmond warehouse office ground and sealed at $46–$135 per m² comes to $18,400–$54,000, and the band is broad because an old factory slab may need far more grinding than a newer pour.
Converted factory slabs in the inner north and east often need levelling at $23–$55 per m², cold weather stretches curing in unheated space, and occupied CBD floors or trading strips that only allow night work attract an after-hours loading of $1,650–$2,650 for a 300 m² vinyl job. Fresh slabs in new towers usually need less preparation.
Our Methodology
These are independent, GST-inclusive estimates from commercial contractors, suppliers and rate guides, and no contractor can influence them, so always get several written quotes. Read our full methodology →
Commercial flooring cost in Melbourne, from CBD offices to western warehouses
Commercial flooring in Melbourne costs $37–$100 per m² for carpet tile or broadloom, $32–$83 per m² for commercial and safety vinyl, and $27–$82 per m² for epoxy floor coatings, supplied and installed. Typical jobs sit near $68 per m² for carpet tile and $55 per m² for vinyl. Polished concrete with grind and seal runs $46–$135 per m², usually around $91 per m².
The city's work falls into distinct groups. CBD and Docklands office floors are mostly carpet tile, often installed after hours so tenants keep trading. Hospitality and retail in Richmond, Fitzroy, Brunswick and South Yarra lean towards polished concrete, vinyl plank or epoxy in kitchens. Warehouses in Dandenong South, Truganina, Laverton North and Campbellfield want coated slabs and line marking, priced at $3–$14 per metre. Converted warehouses and older shopfronts often need the old floor removed at $7.30–$23 per m² and a screed at $23–$55 per m² to bring the slab level. Cold, damp winters slow cure times, so heating may be needed on site.
Data rooms and electronics labs requiring an anti-static floor sit at $55–$115 per m². A good Melbourne commercial flooring quote should list each area and finish separately, name the product range, show removal and preparation as their own lines, state whether labour is after hours, and include the access plan for loading docks, goods lifts and building management sign-off.
What a Compliant Commercial Flooring Quote Includes — Cost in Melbourne
A Melbourne flooring quote needs to be explicit about access, because a Carlton shopfront, a Brunswick warehouse conversion and a CBD tower each change how material gets to the floor. Check that quantities, preparation and after-hours loadings are set out on the page rather than implied by a single m² rate.
- Quantities in m² by level or tenancy, with waste for plank direction and attic stock stated as their own numbers
- Access for Melbourne CBD towers: lift bookings, dock windows and induction hours as a fixed line, not absorbed in the rate
- Laneway or rear-access deliveries for Carlton, Richmond or South Yarra shopfronts, with trolley distance and parking costs named if they add anything
- Moisture test on the slab, $185–$455 per job, with the result and the chosen barrier recorded
- Removal and disposal of the old floor at $7.30–$23 per m², including any bin or crane hire
- Night or weekend works for trading tenancies at $2,000 per project as a typical loading, with shift times shown
- Ex GST or inc GST shown on every line, and the inspection, defects list and final payment sequence dated