Updated November 2026·Independently researched·10 min read
Data cabling in Wollongong runs $150–$400 per point
for a Cat6 data point installed, as published by installers - additional points, Cat6A, fibre, patch panels and cabinets below
A first Cat6 data point in a Wollongong office costs $150–$400 installed, with $250 typical, and each additional point on the same visit $90–$250. A Crown Street accounting practice adding a handful of desks and a Unanderra workshop cabling a shed for Wi-Fi are priced from the same rows; what differs is the point count, how far the runs go and what hangs off the patch panel.
+4.8%Data Cabling costs in Wollongong are up around 4.8% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical Cat6 data point in Wollongong
$250
per point installed, Wollongong 2026, as published
Cat6 data point, installed (first point)
$150-$400
Additional data point, same visit
$90-$250
Office fit-out data point at volume (20+ points, run to patch panel)
$180-$400
$150$250$400
Data cabling in Wollongong is priced per point: $150–$400 for a first Cat6 data point installed, $90–$250 for each additional point on the same visit, $150–$550 for a Cat6A point rated for ten-gigabit links, and $180–$400 per point on an office fit-out of twenty or more points run back to a patch panel. The comms end is priced on its own lines: a patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800 and a network switch supplied and fitted at $100–$900.
What separates two Wollongong quotes for the same point count is the building. A solid-wall shopfront on Crown Street or Keira Street has no ceiling cavity, so every run is chased or surface-ducted; a Wollongong Central or Stockland Shellharbour tenancy has a suspended ceiling but centre rules on when the cabler can be on site; a Port Kembla or Unanderra shed has long runs under a high roof, which is where the registered cabler's hourly rate of $80–$160 starts to matter beside the per-point price.
The small lines decide the total. A Wi-Fi access point cabled and mounted at $150–$650 with the unit shown separately, an NBN, phone or data point relocation at $150–$500 when a Fairy Meadow tenancy changes hands, cable certification and the report at $12–$100 per point, and a call-out of $80–$200 where the installer charges one. Fibre between buildings is its own job: $300–$1,000 per run installed and terminated and $60–$220 per core terminated or fusion spliced.
Quick answerData cabling in Wollongong runs $150–$400 per point for a first Cat6 data point installed in 2026, $90–$250 per point for each additional point on the same visit and $180–$400 per point on an office fit-out of 20 or more points run to a patch panel. Cat6A points cost $150–$550, a patch panel $200–$800 and a wall-mount comms cabinet $380–$1,800. Prices are as published by installers; the GST basis varies. Get free Wollongong quotes →
Data Cabling Prices in Wollongong 2026: Cost Table and Price List
Service
Low
Typical
High
Cat6 data point, installed (first point)
$150per point
$250
$400
Additional data point, same visit
$90per point
$150
$250
Cat6A data point, installed
$150per point
$300
$550
Office fit-out data point at volume (20+ points, run to patch panel)
$180per point
$250
$400
Fibre optic run, installed and terminated
$300per job
$450
$1,000
Fibre core termination or fusion splice
$60per unit
$110
$220
Patch panel supplied and terminated (12-24 port)
$200per panel
$400
$800
Wall-mount comms cabinet supplied and installed (6-12RU)
$380per unit
$900
$1,800
Wireless access point install (cable run and mount, unit excluded)
$150per point
$300
$650
NBN, phone or data point relocation
$150per job
$300
$500
Cable certification test and report
$12per point
$35
$100
Network switch supplied and fitted
$100per switch
$350
$900
Registered cabler hourly rate
$80per hour
$112
$160
Call-out or minimum attendance, where charged
$80per visit
$150
$200
Scoping data cabling work in Wollongong? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Wollongong and the Illawarra, November 2026.
What does a data point cost in Wollongong?$150–$400 per point for a first Cat6 point installed, $250 typical. Each additional point on the same visit costs $90–$250, a Cat6A point $150–$550, and an office fit-out point at volume $180–$400 per point.
What gets added to a Wollongong data cabling quote?A patch panel supplied and terminated at $200–$800, a wall-mount comms cabinet at $380–$1,800, a network switch at $100–$900, a Wi-Fi access point cabled and mounted at $150–$650, cable certification at $12–$100 per point, and a call-out of $80–$200 where the installer charges one.
Worked Data Cabling Cost Scenarios — Wollongong
Wollongong examples priced from this page's rows: a Keira Street dental suite, a Warrawong office floor and a Kembla Grange transport depot. Each line names the row it draws on; the quote you receive prices your own runs, ceilings and point count.
Keira Street dental suite. A dental practice fitting out a Keira Street tenancy needs points at every chair, the front desk and the imaging room. The first Cat6 point goes in at $150–$400 ($250 typical), the rest at $90–$250 each on the same visit, and the imaging room is run in Cat6A at $150–$550 per point for the larger files. A wall-mount comms cabinet at $380–$1,800 holds a patch panel at $200–$800 and a network switch at $100–$900, with certification at $12–$100 per point on its own line.
Warrawong office floor. An insurer taking a floor in Warrawong orders a fit-out of several dozen points run to a patch panel at $180–$400 per point, typically $250, with the patch panel at $200–$800 and a comms cabinet at $380–$1,800 as their own lines. Wi-Fi access points in the ceiling are cabled and mounted at $150–$650 each with the units priced separately, and the existing NBN point is relocated to the comms room at $150–$500.
Kembla Grange transport depot. A freight operator at Kembla Grange links the office to a separate workshop with a fibre run at $300–$1,000 installed and terminated, each core terminated or fusion spliced at $60–$220, then cables the workshop for Wi-Fi coverage with access points at $150–$650 each. Work on the mezzanine and across the roof trusses is partly priced at the cabler's hourly rate of $80–$160, and the quote shows the call-out at $80–$200 as a nil line because the installer does not charge one.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping data cabling work in Wollongong? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by installers; the GST basis varies by installer. Wollongong and the Illawarra, November 2026.
Data Cabling Costs by Sector in Wollongong
Wollongong's data cabling work runs from the CBD, Crown Street Mall and the harbour and the offices of Warrawong and Shellharbour, through the tenancies at Wollongong Central, Stockland Shellharbour and Figtree Grove, to the sheds of Unanderra, Port Kembla, Kembla Grange and Albion Park Rail, the university and hospital precincts, and the venues of North Wollongong, the harbour and Thirroul.
Offices: the CBD, Warrawong and Shellharbour - Fit-out points at volume at $180–$400 per point run to a patch panel at $200–$800, a comms cabinet at $380–$1,800, a switch at $100–$900 and certification at $12–$100 per point; a smaller suite adding a few desks pays $150–$400 for the first point and $90–$250 for each after it.
Medical and dental: Keira Street, the Wollongong Hospital precinct, Shellharbour - Consulting rooms cable every chair and desk, with Cat6A at $150–$550 per point where imaging moves across the network and a wall-mount cabinet at $380–$1,800 in the store room; the practice asks for the completion statement and the certification report together for its own records.
Retail and centres: Crown Street, Wollongong Central, Stockland Shellharbour, Figtree Grove - A POS counter and back office run from a first point at $150–$400 and additional points at $90–$250, with an NBN or phone point relocation at $150–$500 when the counter moves and centre after-hours work priced at the hourly rate of $80–$160.
Industrial: Unanderra, Port Kembla, Kembla Grange, Albion Park Rail - Warehouses buy Wi-Fi coverage: access points cabled and mounted at $150–$650 each, long runs on the hourly rate of $80–$160, and fibre between buildings at $300–$1,000 per run with cores at $60–$220 each.
Education and hospitality: the University of Wollongong, the Innovation Campus, North Wollongong, Thirroul - Teaching spaces and venues are access-point jobs at $150–$650 per point with the units separate, plus a switch at $100–$900 where the existing one has no spare ports, and a call-out at $80–$200 where the installer charges one for a small add-on visit.
What a Compliant Data Cabling Quote Includes — Cost in Wollongong
Before comparing Wollongong quotes, check each one prices the same number of points at the same cable grade, says whether the patch panel, cabinet, switch and certification are in or out, names the cabler's registration, and shows the GST basis on every line.
The point count and cable grade - Cat6 at $150–$400 for the first point and $90–$250 for each additional point, or Cat6A at $150–$550 per point - with the run length and ceiling or wall access described
Office fit-outs priced per point at volume, $180–$400 per point for 20 or more points run to a patch panel, with the volume break stated
The patch panel at $200–$800 and the wall-mount comms cabinet at $380–$1,800 as their own lines, with port and rack-unit counts
Network switches at $100–$900 supplied and fitted, with the make and whether it is managed or unmanaged
Wi-Fi access points cabled and mounted at $150–$650 per point, with the unit itself shown separately
Fibre runs at $300–$1,000 installed and terminated and fibre cores at $60–$220 each, with the fibre type and connector named
Cable certification testing and the report at $12–$100 per point, or a nil line where it is included in the point price
The cabler's ACMA registration kind - open, restricted or lift - and the completion statement that the work complies with the Wiring Rules
A single GST basis across every line, the call-out at $80–$200 where charged, and the cabler's ABN and insurance
Data cabling cost in Wollongong: offices, clinics and Illawarra sheds
Data cabling cost in Wollongong for a small office starts at $150–$400 for the first Cat6 point installed (typically $250) and $90–$250 for each additional point on the same visit, and settles at $180–$400 per point once a fit-out passes twenty points run to a patch panel. Cat6A at $150–$550 per point is the grade for ten-gigabit links; a patch panel at $200–$800, a wall-mount cabinet at $380–$1,800 and a switch at $100–$900 complete the comms end.
The building writes the rest of a Wollongong quote. Solid-wall shopfronts on Crown Street and Keira Street mean chased or surface-ducted runs, Wollongong Central and Stockland Shellharbour tenancies mean after-hours work at the hourly rate of $80–$160, and Port Kembla and Unanderra sheds mean long runs, elevated work and often a fibre link at $300–$1,000 per run with cores at $60–$220 each. Around the points sit Wi-Fi access points at $150–$650 each, point relocations at $150–$500, certification at $12–$100 per point and a call-out of $80–$200 where charged.
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Ask the Wollongong cabler to show the registration kind on the quote and to hand over the completion statement with the invoice, so it sits with the practice or tenancy records.
Data cabling cost by point count and cable grade in Wollongong
Quick answerWollongong pricing steps by point count and grade: a Crown Street shop with a counter and back office sits in the $150–$400 first-point and $90–$250 additional-point bracket, a Warrawong or Shellharbour office floor at $180–$400 per point run to a patch panel at $200–$800, and a Port Kembla shed at $150–$650 per access point with fibre at $300–$1,000 per run between buildings.
Point count moves a Wollongong price in two ways. The first point carries the visit, the test kit and the set-up at $150–$400; each additional point on the same visit drops to $90–$250 because the cabler is already on the ladder; and a fit-out of twenty points or more run to a patch panel is priced at $180–$400 per point with the panel at $200–$800, the cabinet at $380–$1,800 and certification at $12–$100 per point on their own lines. Cable grade is the other step: Cat6A at $150–$550 per point against Cat6 at $150–$400.
Run length and access are the levers a point count does not show. A Thirroul cafe with a ceiling cavity is a short-run job; a Kembla Grange warehouse is long runs across trusses, which the cabler prices on the hourly rate of $80–$160 on top of the points, with Wi-Fi access points at $150–$650 each and a network switch at $100–$900 to feed them. Between two buildings the run becomes fibre at $300–$1,000 installed and terminated, with each core at $60–$220; a single moved NBN or phone point at $150–$500 and a call-out at $80–$200 where charged are the small-job lines.
Frequently Asked Questions — Data Cabling Cost in Wollongong
What is the price of data cabling in Wollongong?
From our Wollongong table: $150–$400 per point for a first Cat6 data point installed (typically $250); $90–$250 per point for each additional point on the same visit (typically $150); $180–$400 per point on an office fit-out of 20 or more points (typically $250).
How much does a single data point cost in Wollongong?
A first Cat6 data point installed costs $150–$400 in Wollongong, with $250 typical, and each additional point on the same visit $90–$250. A Keira Street or Crown Street tenancy with solid walls and no ceiling cavity sits toward the top of the first-point band because the run is chased or ducted; a Warrawong or Shellharbour office with a suspended ceiling usually sits lower.
What does an office fit-out data cabling job cost per point in Wollongong?
Going by our Wollongong table, an office fit-out point at volume - 20 or more points run to a patch panel - costs $180–$400 per point, typically $250, with the patch panel at $200–$800 and the comms cabinet at $380–$1,800 on their own lines. Office floors in the CBD, Warrawong and Shellharbour and at the Innovation Campus in North Wollongong are the usual Wollongong buyers, and the quote should state the volume break, the port count on the panel and whether certification at $12–$100 per point is inside the point price.
How much more is Cat6A than Cat6 in Wollongong?
A Cat6A data point installed costs $150–$550 on our Wollongong table, with $300 typical, against $150–$400 for a first Cat6 point; Cat6A is the grade rated for 10 gigabit links.
Do I need a registered cabler in Wollongong?
The Telecommunications (Cabling Provider) Rules 2025, made by the ACMA under the Telecommunications Act 1997 and in force since 31 March 2025, set three kinds of cabling registration - lift, open and restricted - and require cabling work to be performed by a registered cabling provider holding the right kind of registration, or by a supervised provider whose supervisor accepts full responsibility for the work. On completing the work the registered provider must give a statement that identifies the cabling work and states that it complies fully with the Wiring Rules, to the customer and to the employer or engager, and keep a copy for at least one year. Ask a Wollongong installer to name the registration kind on the quote and to leave the completion statement with the invoice; a practice on Keira Street or a tenancy at Wollongong Central will want it on file beside the certification report.
What does a Wollongong data cabler charge per hour?
A registered cabler's hourly rate is $80–$160 on our Wollongong table, with $112 typical, and a call-out or minimum attendance of $80–$200 applies where the installer charges one; several installers advertise no call-out fee with fixed per-point pricing.
What does fibre cabling cost in Wollongong?
A fibre optic run installed and terminated costs $300–$1,000 in Wollongong, with $450 typical, and each fibre core terminated or fusion spliced $60–$220. Port Kembla, Unanderra and Kembla Grange sites linking an office to a separate shed, and the university and hospital precincts, are the usual Wollongong fibre buyers; the quote should name the fibre type, the connector and the number of cores terminated.
What do Wi-Fi access points and switches cost to install in Wollongong?
A wireless access point cabled and mounted costs $150–$650 per point in Wollongong with the unit itself excluded, and a network switch supplied and fitted $100–$900. Unanderra and Albion Park Rail warehouses chasing Wi-Fi coverage and venues at North Wollongong and Thirroul are the usual Wollongong access-point jobs; ask for the unit as its own line and for the switch to be named as managed or unmanaged.
Is cable certification included in a Wollongong data cabling quote?
Cable certification testing and the report costs $12–$100 per point on our Wollongong table, with $35 typical, and several installers include it in the point price - the quote should say which. Under the Telecommunications (Cabling Provider) Rules 2025 the cabler must hold the right kind of registration - lift, open or restricted - or work under a supervisor who accepts full responsibility, and must give the customer a completion statement that the work complies fully with the Wiring Rules and keep a copy for at least one year. A Wollongong fit-out usually bundles certification with the patch panel at $200–$800 and the cabinet at $380–$1,800; ask for the test result per point, not just a pass.