How much do commercial garage doors cost in Wollongong?
In Wollongong, commercial garage doors are priced at $2,900–$25,500 installed, depending on door type, the size of the opening and whether it is motorised. Roller shutters and roller doors make up the lower part of that range, with an industrial roller shutter at $2,900–$12,250 installed, while sectional and high-speed rapid-roll doors cover the upper part.
Flat land is scarce between the escarpment and the sea, so many trade and storage units are compact, and a roller door for an opening of about 3m x 3m suits them; motorised, it costs $3,275–$5,600 installed. Larger openings belong to the steelworks, port and logistics sites around Port Kembla and the southern industrial estates.
Plan for an annual service at $155–$355 a year for each door and, in time, a new motor at $765–$2,550 per door. Roller door and shutter prices include GST, while sectional, insulated-panel and rapid-roll prices are ex GST.
Comparing cities, or after the Australia-wide picture? See the national guide: How much do commercial garage doors cost in Australia?
Commercial Garage Door Prices in Wollongong 2026: Cost Table and Price List
| Service | Low | Typical | High |
|---|---|---|---|
| Industrial roller shutter (per door, installed) | $2,900installed | $4,600 | $12,250 |
| Insulated commercial door (PU-core sectional, supply only, per sqm of door, ex GST) | $280/sqm | $330 | $380 |
| Commercial sectional overhead door (installed, ex GST) | $3,500installed | $9,900 | $20,200 |
| High-speed / rapid-roll door (supply + install, ex GST) | $11,200supply+install | $15,300 | $25,500 |
| Roller door ~3m x 3m, manual (installed) | $2,050installed | $2,700 | $3,675 |
| Roller door ~3m x 3m, motorised (installed) | $3,275installed | $4,275 | $5,600 |
| Roller door ~4m x 4m, motorised (installed) | $4,700installed | $5,800 | $7,650 |
| Roller door ~5m x 5m, motorised (installed) | $6,100installed | $7,450 | $10,200 |
| Door motor / operator replacement | $765per door | $1,275 | $2,550 |
| Annual door service (per door) | $155per year | $255 | $355 |
You're in.
A local installer will be in touch about your job. No spam, no call centre.
Scoping a commercial garage door? Get a quote from an Australian commercial door installer — free, no obligation.
Get commercial quotes →Prices include GST unless the row says ex GST. Wollongong-wide, November 2026. Large or custom openings vary.
Roller doors in Wollongong and other commercial garage door prices by type
Roller doors in Wollongong come in two families: the standard commercial roller door sized to the bay, and the heavier industrial shutter built for the steel, freight and engineering sheds between Port Kembla and Dapto. Sectional, rapid-roll and insulated doors fill out the list, each with its own band.
- Commercial roller door, motorised: $3,275–$5,600 installed at 3 m x 3 m, $4,700–$7,650 installed at 4 m x 4 m and $6,100–$10,200 installed at 5 m x 5 m; a manual 3 m x 3 m door is $2,050–$3,675 installed.
- Industrial roller shutter: $2,900–$12,250 installed, with the engineering workshops at Unanderra and Berkeley paying for heavy gauge, coated curtains and three-phase drives.
- Sectional overhead door: $3,500–$20,200 installed, ex GST, for the car yards and bulky-goods stores strung along the Princes Highway through Fairy Meadow and Corrimal.
- Rapid-roll door: $11,200–$25,500 supply and install, ex GST, for cold-room openings at the food distributors at Albion Park Rail.
- Insulated PU-core door: $280–$380 per m² of door, supply only, ex GST, installation extra; worth it on an air-conditioned workshop on the coastal flats at Coniston, where humidity makes the summer work.
- Operator and service: $765–$2,550 per door for a replacement operator and $155–$355 a year for each door.
Use the form on this page to get quotes from commercial garage door installers in Wollongong.
Commercial vs residential garage doors — why commercial costs more
A garage door on a Figtree house opens a few times a day for one car. A shutter on a Port Kembla logistics shed or an Unanderra workshop may run through every shift, so its curtain, drum, springs and operator are built for many more cycles and heavier loads. Commercial openings are wider, motors are often three-phase, and doors near the sea need coated hardware a suburban door rarely gets. Installs need lifting gear, an electrician and timing around operations, none of which a house door calls for.
Commercial garage door sizes and how size drives price
Here a motorised roller door near 3m x 3m costs $3,275–$5,600 installed, near 4m x 4m it is $4,700–$7,650, and near 5m x 5m $6,100–$10,200. Each step up adds curtain weight, which needs a larger drum, stronger springs and a heavier operator. Openings beyond that move into industrial shutters or sectionals priced on their own bands. Note any fall in the floor as well, since some sites on the slopes below the escarpment are not level and need packing at the threshold.
What Actually Moves the Commercial Garage Door Cost in Wollongong
- Salt spray. Shops and sheds near the beaches between Thirroul and Port Kembla take salt on the curtain and guides, so coated finishes and stainless fixings add cost but slow corrosion.
- Port and steelworks. Fine particles around the steelworks and coal terminal collect in guides and bottom seals, so doors there need brushes and more frequent servicing.
- Wind-driven rain. Heavy rain off the escarpment and east coast lows test bottom seals and weather strips. Ask what wind rating the door is designed for on exposed openings.
- Cycle count. A port logistics door running all shift needs a heavy-duty operator and springs, while a storage unit opened twice a day can use lighter parts.
- Site access. Narrow streets in older centres and busy port yards can mean smaller lifting gear, extra crew or a weekend install.
How to Keep the Commercial Garage Door Cost Sane in Wollongong
Commercial garage door cost by door type
Wollongong sites tend to split by exposure and use. Industrial yards at the port and the southern estates mostly choose roller shutters, which cost less to install on big openings and stand up to forklifts. Customer-facing frontages and air-conditioned offices lean to sectional doors, insulated where the room is cooled or heated. Rapid-roll doors are kept for internal openings, usually inside the building where traffic never stops. Salt and grit then decide what finish and servicing each door needs.
Our Methodology
Commercial pricing on this page is compiled from Australian commercial and industrial garage-door suppliers and installers, published supplier price guides and product ranges as of November 2026. We cross-reference ranges from multiple sources; no contractor can influence a published figure. All prices are estimates, GST-inclusive unless a row says ex GST, and will vary with your specific opening, door spec and site. Always get multiple written quotes. Last reviewed November 2026. Read our full methodology →
Commercial garage door prices, product by product
Industrial roller shutters in Wollongong cost $2,900–$12,250 installed, typically $4,600. A shutter on a single trade unit at Kembla Grange sits in the lower part of the band; a broad truck opening at a Port Kembla logistics site, with a heavy curtain, wind locks and a three-phase drive, sits near the upper figure. A coated curtain for salt exposure adds to either.
Sectional overhead doors run $3,500–$20,200 installed ex GST, typically $9,900. The insulated version is $280–$380 per m² of door, supply only and ex GST, so a door about 5m wide and 3m high comes to $4,200–$5,700 supplied, with installation quoted on top. Glazed sections and a pass door lift the figure further.
High-speed rapid-roll doors cost $11,200–$25,500 supplied and installed ex GST, typically $15,300. The numbers stack up where a cool room or chiller is opened by pallet traffic all day, because every second the opening stands open costs refrigeration. Radar or floor-loop activation and the curtain material shift the final figure.
A replacement operator costs $765–$2,550 per door, and annual servicing $155–$355 a year per door. Doors near the sea or the port carry the most wear, so ask the technician to clean and lubricate the guides and bearings, check spring tension and test safety reversing at each visit.
Commercial garage doors — go deeper





Which door for which job?
Truck depots, steel and fabrication workshops, and port service sheds at Unanderra, Kembla Grange and Port Kembla: an industrial roller shutter, finished for salt and grit, gives the best security per dollar on large openings.
Bulky-goods stores, trade showrooms and offices around Fairy Meadow and the city centre: a sectional door, insulated where the space is air-conditioned, suits a frontage customers see.
Food, beverage and cold storage sites: a rapid-roll door on the internal chiller opening, paired with a shutter on the external wall. Small storage units in Dapto or Shellharbour usually need nothing more than a plain roller door, manual or motorised.
Red flags when comparing commercial door installers
- No finish or corrosion protection specified for a door that faces the sea.
- A light-duty operator offered on a door that will run through every shift.
- Wind rating left blank on a wide door exposed to coastal southerlies.
- Removal of the old door, framing repairs and the electrical connection left off the quote.
- A price that assumes clear access to a busy port yard, with no allowance for working around traffic.
Commercial garage door cost in Wollongong and the Illawarra
Commercial garage doors in Wollongong cost $2,050–$3,675 installed for a manual roller door around 3m x 3m and $3,275–$5,600 installed for a motorised door of that size, typically $4,275. Sectional overhead doors, used on showrooms, workshops and service centres, cost $3,500–$20,200 installed ex GST. Industrial roller shutters for truck openings cost $2,900–$12,250 installed.
The Illawarra mixes heavy industry around Port Kembla and Unanderra with trade units in Kembla Grange, Dapto, Albion Park Rail and Shellharbour, and coastal shops near Thirroul and North Wollongong. Industrial dust and grit near the port wear guides and seals, while salt spray along the coast corrodes curtains and fixings. A motorised 4m x 4m roller door costs $4,700–$7,650 installed. Busy loading openings may use a high-speed rapid-roll door at $11,200–$25,500 supplied and installed, ex GST.
Motor replacement costs $765–$2,550 per door and an annual service $155–$355 a year per door, which is worth booking more often on doors exposed to sea spray or heavy industrial use. A Wollongong commercial door quote should give the opening size, whether it is a roller door, shutter or sectional, the finish chosen for salt or industrial exposure, the motor and safety beams, any pass door or windows, and removal and disposal of the old door.
What a Compliant Commercial Garage Door Quote Includes — Cost in Wollongong
In Wollongong a commercial garage door quote has to deal with salt from the coast, heavy industrial duty near Port Kembla and the ex GST or inclusive basis of each line. Ask for all three in writing before comparing totals.
- Door count and the clear opening, headroom and side room of each, with door type and curtain gauge named.
- Salt protection for sites from Thirroul to Shellharbour: curtain coating, guide finish and fastener grade stated, and whether they cost extra.
- Heavy-duty operators and curtain gauge for industrial sheds around Port Kembla and Dapto, with duty cycle and phase listed.
- Installed or supply only and ex GST or inclusive written on every line, with an industrial roller shutter at $2,900–$12,250 per door installed as a like-for-like line.
- Insulated sectional panels for cold stores priced on door area, $330 per square metre typical, supplied without fitting.
- Access, lift hire and truck access to the opening, plus any after-hours loading for a site that keeps operating.
- Removal and disposal of the old door, electrical connection, make-good and who signs off the commissioned door.