Independent Australian Cost Guides
Updated November 2026
← All commercial trades

How much do commercial garage doors cost in Sydney?

Commercial garage doors run $3,000–$26,250
installed, depending on door type, size and automation
Sydney prices are per door, rising from $3,000 for an installed industrial roller shutter to $26,250 for a high-speed rapid-roll door, supply and install. A Brookvale workshop with a motorised roller door near 3m x 3m can plan on $3,350–$5,800 installed, then $155–$365 per door per year to keep it serviced.
+5.1% Commercial garage door prices are up around 5.1% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Industrial Roller Shutter
$4,750
per commercial roller door, installed
Roller Shutter
$3,000–$12,600
Insulated
$280–$380/m²
Sectional
$3,600–$20,800
Roller $3,000Sectional $10,200High-speed $26,250

Commercial garage doors in Sydney cost $3,000–$26,250 installed. An industrial roller shutter is the entry point, a commercial sectional overhead door covers $3,600–$20,800 installed, and a high-speed rapid-roll door tops the range; opening size, motor and extras such as pass doors decide each job's figure.

Sydney's door work is concentrated in the western industrial and logistics belt, from Wetherill Park, Smithfield and Eastern Creek to Moorebank, and around Port Botany, Alexandria and Mascot, plus basement car park doors under apartment and office buildings across the city. Car park doors cycle many times a day, so the operator rating matters there more than curtain weight.

Upkeep is an annual service at $155–$365 a year per door, and a replacement operator at $785–$2,625 per door. Roller door and shutter prices include GST; sectional, insulated-panel and rapid-roll prices are ex GST.

Comparing cities, or after the Australia-wide picture? See the national guide: How much do commercial garage doors cost in Australia?

Quick answerA commercial garage door costs $3,000–$26,250 installed depending on type — roller shutters at the low end, high-speed rapid-roll doors at the top. Get free commercial quotes →

Commercial Garage Door Prices in Sydney 2026: Cost Table and Price List

ServiceLowTypicalHigh
Industrial roller shutter (per door, installed)$3,000installed$4,750$12,600
Insulated commercial door (PU-core sectional, supply only, per sqm of door, ex GST)$280/sqm$330$380
Commercial sectional overhead door (installed, ex GST)$3,600installed$10,200$20,800
High-speed / rapid-roll door (supply + install, ex GST)$11,550supply+install$15,750$26,250
Roller door ~3m x 3m, manual (installed)$2,100installed$2,775$3,775
Roller door ~3m x 3m, motorised (installed)$3,350installed$4,400$5,800
Roller door ~4m x 4m, motorised (installed)$4,825installed$6,000$7,850
Roller door ~5m x 5m, motorised (installed)$6,300installed$7,650$10,500
Door motor / operator replacement$785per door$1,300$2,625
Annual door service (per door)$155per year$260$365
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local installer will be in touch about your job. No spam, no call centre.

Scoping a commercial garage door? Get a quote from an Australian commercial door installer — free, no obligation.

Get commercial quotes →
Prices verified November 2026 · Cross-referenced against Australian commercial garage door suppliers · See methodology

Prices include GST unless the row says ex GST. Sydney-wide, November 2026. Large or custom openings vary.

Commercial garage door types and what they cost

Industrial roller shutters

$3,000–$12,600 installed

Many on-grade truck bays across the Mamre Road precinct, Erskine Park and Ingleburn close with one of these coiled steel curtains. A single bay with a light operator stays low in the band; a wide, heavy-gauge curtain on a three-phase drive climbs towards the upper figure.

Commercial sectional doors

$3,600–$20,800 installed, ex GST

Panel-lift doors suit car dealerships along Parramatta Road and trade showrooms in Artarmon, where customers see the door and glazed sections help. They also seal tighter than a curtain on Silverwater and Rydalmere workshops that run air-conditioning.

High-speed rapid-roll doors

$11,550–$26,250 supplied and installed, ex GST

They are worth the money where an opening barely stops moving: chilled produce handling around the wholesale market at Flemington, food plants in the west and freight sheds near the airport at Mascot. Fast cycling holds temperature and keeps dust and birds out.

Insulated sectional doors

$280–$380 per m² of door, supply only, ex GST

Installation is quoted on top of this supply price. Cold stores and temperature-controlled warehouses in Eastern Creek and Huntingwood specify them where the door forms part of a chilled or conditioned building.

Pass and access doors

quoted per door

A pedestrian door set into the curtain or panel, or beside it, lets staff walk in without lifting a big door. Depots with a staff entrance and showrooms that lock up after hours often add one; installers price each to suit its frame, lock and hardware.

Commercial vs residential garage doors — why commercial costs more

A Sydney commercial door works far harder than one on a house, and the price reflects it. The basement door under an apartment block can cycle all day as residents come and go, so its operator is rated for near-continuous duty. Warehouse bays in the outer west are wider and taller, which means heavier curtains, stronger springs and deeper guides. Safety beams, vehicle loop detectors, three-phase wiring and night installation to keep a business trading all add cost that a household door never carries.

Commercial garage door sizes and how size drives price

Opening size moves a roller door price in clear steps. Near 3m x 3m, a manual door costs $2,100–$3,775 installed, or $3,350–$5,800 with a motor, which suits a courier van bay or a small trade unit in Kings Park. About 4m x 4m clears small trucks for $4,825–$7,850 motorised. Near 5m x 5m, enough for a rigid truck at a Prestons depot, the figure is $6,300–$10,500. Anything bigger is quoted as an industrial shutter.

What Actually Moves the Commercial Garage Door Cost in Sydney

How to Keep the Commercial Garage Door Cost Sane in Sydney

1
Send every installer the same details: clear width and height, room above and beside the opening, and roughly how many times a day it opens.
2
Size the door to the largest vehicle that really uses the bay: a motorised door around 4m x 4m at $6,000 typical instead of one around 5m x 5m at $7,650 saves about $1,650.
3
If the curtain is sound, replace only the drive: a new operator runs $785–$2,625 per door, less than a new motorised door.
4
Keep an annual service at $155–$365 a year so springs, limits and safety reversing are checked before a breakdown stops deliveries.
5
Fit a manual roller door where a bay opens once or twice a day, such as a storage room, and skip the motor altogether.

Commercial garage door cost by door type

Quick answerIn Sydney an industrial roller shutter costs $3,000–$12,600 installed, a commercial sectional door $3,600–$20,800 installed ex GST, and a high-speed rapid-roll door $11,550–$26,250 supplied and installed ex GST.

Door type sets the band before size does. Shutters cover the plain steel bays on many western Sydney sheds and are the lowest-cost way to secure a large opening. Sectional doors cost more because panels, tracks and torsion springs are more complex, and in return they seal, insulate and present better on a street frontage. Rapid-roll doors carry the highest price since the curtain, drive and sensors are built for constant cycling, which pays only where an opening stays busy all shift. Mind the GST split: sectional and rapid-roll figures exclude it.

Our Methodology

Commercial pricing on this page is compiled from Australian commercial and industrial garage-door suppliers and installers, published supplier price guides and product ranges as of November 2026. We cross-reference ranges from multiple sources; no contractor can influence a published figure. All prices are estimates, GST-inclusive unless a row says ex GST, and will vary with your specific opening, door spec and site. Always get multiple written quotes. Last reviewed November 2026. Read our full methodology →

Commercial garage door prices, product by product

Industrial roller shutters cost $3,000–$12,600 per door installed, with $4,750 typical. The product is a coiled steel curtain on a barrel, running in guides either side of the opening. Curtain gauge, width, wind locks and whether the drive is a chain hoist, a single-phase motor or a three-phase operator decide where a door lands, and perforated or grille curtains for retail frontages add to the figure.

Commercial sectional overhead doors install for $3,600–$20,800 ex GST, typically $10,200. Horizontal panels ride tracks that run back under the roof, so headroom and the track layout, from low-headroom to high-lift or vertical-lift, matter as much as width. Full-view aluminium panels for a showroom, a wicket door or a heavy-duty operator move a door up the band.

An insulated PU-core sectional door costs $280–$380 per m² of door, ex GST and supply only, with $330 per m² typical. Work from the door's area: a 4m x 4m dock door is 16 m², about $5,280 ex GST to supply at the typical rate, and installation is quoted on top. Panel thickness and seal design move the rate within the band.

High-speed and rapid-roll doors run $11,550–$26,250 supplied and installed, ex GST. Buyers pay for a flexible fabric or interlocking curtain, a fast variable-speed drive and sensors that open the door as a forklift arrives. Internal doors between a chiller and dispatch sit lower in that band; doors facing the weather need a curtain and guides that resist wind pressure inward and outward.

Commercial garage doors — go deeper

Which door for which job?

A western Sydney warehouse or depot with truck bays in use all day: an industrial roller shutter with a three-phase operator and wind locks, because it is tough, secure and quick to service.

A dealership, showroom or trade counter on a main road: a commercial sectional door, glazed where customers look at it, because it presents well from the street and seals the opening while air-conditioning runs.

A cold store or produce handler near Flemington: a rapid-roll door on busy internal openings and an insulated sectional on the external dock. An apartment car park run by an owners corporation suits a roller or sectional door with an operator rated for frequent cycling.

Red flags when comparing commercial door installers

Roller door sizes and prices in Sydney

Sydney roller door prices follow the opening, then the duty. For a van bay in an Alexandria or Smithfield unit, a 3m x 3m door costs $2,100–$3,775 installed as a manual door and $3,350–$5,800 installed motorised. Light trucks into a Wetherill Park warehouse take about 4m x 4m at $4,825–$7,850 installed, and a 5m x 5m opening for a rigid truck is $6,300–$10,500 installed.

Apartment and office car parks are a second kind of Sydney job. A ramp door that opens for every resident's car can cycle many times a day, so it is often quoted with a heavier-duty motor and fitted after hours, which moves the figure up within its row. Servicing is $155–$365 a year per door, and operator replacement is $785–$2,625 per door, typically $1,300.

Courier and trade complexes scale door by door. Four motorised 3m doors on a row of bays come to $13,400–$23,200 installed, working from $3,350–$5,800 for each one. Dock doors that take forklifts all shift are often priced as an industrial roller shutter instead, at $3,000–$12,600 installed.

Commercial garage door cost in Sydney: roller shutters, sectionals and roller doors by size

Commercial garage doors in Sydney are priced per door, installed, and the door type comes first. An industrial roller shutter, the steel curtain door on most warehouses and loading bays, costs $3,000–$12,600 per door installed. A commercial sectional overhead door runs $3,600–$20,800 installed ex GST, and a high-speed or rapid-roll door for a busy dock or a temperature-controlled space $11,550–$26,250 supplied and installed ex GST.

Commercial roller doors are priced by opening size and whether they are motorised. Around 3m x 3m, a manual roller door is $2,100–$3,775 installed and a motorised one $3,350–$5,800. At around 4m x 4m a motorised door is $4,825–$7,850, and at around 5m x 5m $6,300–$10,500. Roller shutter door prices sit above roller doors of the same size because of the heavier curtain and guides.

The after-install lines are a door motor or operator replacement at $785–$2,625 per door and an annual door service at $155–$365 per door. A Sydney commercial door quote should state the door type, the opening size, whether the motor is included and whether the figure is ex or inc GST, and two quotes for the same opening usually differ on door type or motor rather than on price.

What a Compliant Commercial Garage Door Quote Includes — Cost in Sydney

Sydney commercial garage door quotes range from a loading dock shutter under a CBD tower to a warehouse door in western Sydney, so each quote should name the door, the access conditions and whether every figure is ex GST or inclusive before totals are compared.

Frequently Asked Questions — Commercial Garage Door Cost in Sydney

How much should I pay for an industrial roller shutter in Sydney?
For an industrial roller shutter (per door, installed), our Sydney table shows $3,000–$12,600, with a typical price of $4,750.
What do installers charge for a sectional door in Sydney?
Our Sydney prices for a commercial sectional overhead door (installed) start at $3,600 and reach $20,800, with $10,200 typical.
How much is a commercial garage door in Sydney?
Our Sydney table puts a motorised roller door about 3 m x 3 m at $3,350–$5,800 installed, a commercial sectional overhead door at $3,600–$20,800 installed and an industrial roller shutter at $3,000–$12,600 installed.
What does a high-speed rapid-roll door cost for a Sydney warehouse?
A high-speed rapid-roll door for a Sydney warehouse costs $11,550–$26,250 supply and install, ex GST, typically $15,750 supply and install. They suit logistics and cold-chain sites, such as those around Eastern Creek, Moorebank and Botany, where forklifts pass all day. The opening size, curtain material, wind bracing for external doors and the sensors or interlocks that trigger the door set the price.
How should Sydney businesses compare commercial door installation quotes?
Compare Sydney commercial door quotes on the same opening size, door type, curtain or panel gauge, motor and safety beams. Check the GST basis too: sectional doors at $3,600–$20,800 installed and rapid-roll doors at $11,550–$26,250 supply and install are ex GST figures. Then check whether old door removal, electrical connection, traffic control for street-front sites and after-hours work are included.
What does a 4m x 4m motorised roller door cost in Sydney?
A motorised roller door around 4m x 4m costs $4,825–$7,850 installed in Sydney, typically $6,000 installed. That size suits van and light-truck access at trade units in western Sydney suburbs such as Wetherill Park or Smithfield. Stepping down to around 3m x 3m costs $3,350–$5,800 installed, and stepping up to around 5m x 5m costs $6,300–$10,500 installed.
What does a commercial door motor or operator replacement cost in Sydney?
Replacing the operator on a commercial door in Sydney costs $785–$2,625 per door, typically $1,300 per door. A compact single-phase motor on a roller door behind an Alexandria or Marrickville shop sits at the lower end; a three-phase industrial operator on a wide shutter at Silverwater or Ingleburn sits high. Check that the price covers removing the old unit, matching torque to the curtain weight, resetting the limits and safety beams and pairing new remotes, and ask whether access control such as a keypad or swipe reader is extra.
How much does yearly servicing cost across several commercial doors in Sydney?
A commercial door service in Sydney is $155–$365 per door each year, typically $260. A site with six roller doors budgets six times the per-door figure, and many Sydney contractors will quote a keener per-door rate for a multi-door visit, so ask. Each service should cover spring tension, guide cleaning and lubrication, bearing wear, motor limits and the safety reversing test. Doors near the harbour and at Botany face salt air, and western Sydney heat dries lubricant quickly, so neither group should skip a year.
What do insulated panels cost per square metre for a Sydney cold-chain door?
For Sydney cold stores and food distributors, insulated PU-core door panels are $280–$380 per square metre of door, supply only and ex GST, with $330 per square metre the usual figure. Multiply the opening width by its height to get the panel area a supplier will quote on. Fitting, tracks, springs and the operator are not in that figure; the complete installed sectional runs $3,600–$20,800 ex GST. Sites at Eastern Creek, Moorebank and Prestons that hold chilled stock see the saving in refrigeration load.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage