How much does a solar & battery cost in Sydney?
A standard 6.6 kW rooftop system in Sydney costs $4,600–$9,800 installed, typically $6,900, and the same size with premium panels is $7,450–$12,050. Stepping up to 10 kW puts the standard band at $6,900–$13,800. Sydney is less of a detached-house city than the rest of the state: 55.8% of dwellings are separate houses and 30.7% are flats or apartments (ABS 2021 Census), so whether you have a roof of your own shapes the job before the price does. The federal certificate discount is normally already taken off quotes like these, and all prices include GST.
Comparing cities, or after the Australia-wide picture? See the national guide: Solar & battery cost in Australia.
Solar Prices in Sydney 2026: Cost Table and Price List
| Service | Low | Typical | High |
|---|---|---|---|
| 6.6 kW system (standard) | $4,600installed | $6,900 | $9,800 |
| 6.6 kW system (premium panels) | $7,450installed | $9,200 | $12,050 |
| 10 kW system (standard) | $6,900installed | $10,350 | $13,800 |
| 10 kW system (premium panels) | $11,500installed | $14,350 | $17,250 |
| 13 kW system (large home) | $11,500installed | $14,950 | $18,400 |
| Battery 5 kWh (e.g. Sungrow) | $5,750installed | $8,050 | $10,350 |
| Battery 10–13 kWh (mid-range) | $9,200installed | $12,650 | $17,250 |
| Tesla Powerwall 3 (13.5 kWh) | $13,800installed | $16,100 | $19,550 |
| Hybrid inverter upgrade (battery-ready swap on a typical home system, no battery) | $2,300installed | $3,450 | $4,600 |
| Solar panel cleaning | $170per visit | $290 | $460 |
| System health check / inspection | $170per visit | $290 | $400 |
| Inverter replacement (like-for-like string inverter, typical home system) | $1,150installed | $2,075 | $3,450 |
You're in.
A local installer will be in touch about your job. No spam, no call centre.
Getting quotes for solar work in Sydney? Get a quote from a local tradie — free, no obligation.
Get Sydney quotes →Prices include GST. Based on Sydney metro area, November 2026. Outer suburbs may vary.
How Solar Costs Vary Across Sydney
Sydney solar is one range in our table, whatever the suburb. A hybrid inverter upgrade, for adding a battery later, is $2,300–$4,600; a 10 kW system with premium panels $11,500–$17,250. Only 55.8% of Greater Sydney dwellings were separate houses in the 2021 Census, against 65.6% across NSW — on a shared roof, check strata rules first.
What Affects Solar & Battery Costs in Sydney
Sizing for the house you have
Sydney homes split fairly evenly between three bedrooms (30.9%) and four or more (33.1%, ABS 2021 Census). A 6.6 kW system ($4,600–$9,800) is the usual choice for the smaller of those; a bigger household, a pool pump or an electric car points to 10 kW or the large-home band ($11,500–$18,400). Smaller 3 kW and 5 kW arrays rarely cost proportionally less, since labour, wiring and the inverter barely change.
Apartments and shared roofs
With 30.7% of Sydney dwellings in flats or apartments, against 14.2% nationally (ABS 2021 Census), many households have no roof of their own to use. The NSW Government's Solar for Apartment Residents grants co-fund shared solar systems on eligible apartment buildings, and renters in those buildings can benefit as well. Panels on common property go through the owners corporation, so the building, not one resident, normally leads the project.
Terraces, semis and roof direction
North-facing roof sections collect the most sun; east and west faces give less at midday but spread output into the morning and evening. Semi-detached homes and terraces make up 12.8% of Sydney dwellings (ABS 2021 Census) and often have narrow or split roofs, so ask whether the layout needs tilt frames or a second string of panels, both of which raise the price.
Inverter prices
Inverter costs are among the most searched solar questions in Sydney. A like-for-like string inverter replacement on a typical home system is $1,150–$3,450, while a battery-ready hybrid inverter swap is $2,300–$4,600. Micro-inverters or panel optimisers lift the price of a new system but help where a neighbouring building or tree shades part of the roof for some of the day.
Batteries and the NSW payment
A 5 kWh battery is $5,750–$10,350 in Sydney and a 10 to 13 kWh unit $9,200–$17,250. The federal Cheaper Home Batteries discount comes off through your installer, and NSW also pays an upfront incentive when the battery joins a virtual power plant; eligible batteries are sized above 2 kWh, to a 50 kWh ceiling. The NSW home battery installation discount has closed, and no battery can claim both installation discounts.
Certificates, solar zone and the NSW loan
Federal small-scale technology certificates, normally deducted on the quote, cut the upfront price, and location sets how many you get: the regulator's postcode list puts the CBD in zone 3, rated 1.382, and ratings fall from 1.622 for zone 1 to 1.185 for zone 4. Under the NSW Home Energy Saver scheme, an owner-occupier or landlord household earning a combined $210,000 or less can get an interest-free solar loan as large as $15,000, repaid over up to 10 years.
Rain, heat and upkeep
At Observatory Hill June is the wettest month (133.1 mm) with March close behind, September is the driest at 68.1 mm, and January is the warmest at 26.0 °C (BOM averages). Regular rain rinses panels, so a paid clean ($170–$460) mainly earns its keep where dust, salt or bird droppings build up. The regulator asks for a yearly safety check by an SAA-accredited electrician, which is $170–$400 here.
If your roof is near the end of its life, check the roof replacement cost in Sydney before the panels go on.
How to Save Money on Solar Cost in Sydney
Solar cost in Sydney for panels and inverters
Two solar questions come up for Sydney homes: what a panel system costs to put on the roof, and what an inverter costs when one fails or a battery is planned. Both are priced below from the Sydney table.
Solar panel prices in Sydney
Solar panels in Sydney are sold as an installed system. With standard panels a 6.6 kW system is $4,600–$9,800 and a 10 kW system $6,900–$13,800, with $10,350 the middle of the larger row. Those figures include the inverter and the installation, so a per-panel price on a quote should be read back to the system total.
Premium panels lift each size: $7,450–$12,050 for 6.6 kW and $11,500–$17,250 for 10 kW. A 13 kW system for a large Sydney home is $11,500–$18,400. A Parramatta or Mosman quote should state the system size in kilowatts, the panel count and the panel grade, because those three lines place it on a row.
Solar inverter prices in Sydney
Replacing a failed string inverter with the same type is $1,150–$3,450 in Sydney, and $2,075 is the middle of that row. The panels stay where they are; the job is the new inverter, its wiring and the tests that follow.
A hybrid inverter is the swap made when a battery is planned. The upgrade row is $2,300–$4,600 without a battery, $3,450 in the middle, and it suits a system whose panels are sound. Ask whether the old inverter is removed and disposed of inside the price.
Solar battery cost in Sydney (2026)
Solar battery cost in Sydney comes down to two lines in the table above: the battery itself, sized in kWh, and whether the existing inverter can run one.
Home battery prices by size in Sydney
A 5 kWh battery in Sydney is $5,750–$10,350 installed, typically $8,050. Stepping up to a 10–13 kWh unit puts the price at $9,200–$17,250, with $12,650 the typical figure, and a 13.5 kWh premium battery is $13,800–$19,550.
Size the battery to the evening load rather than the panel count. A Parramatta household running a pool pump and cooking after dark is pricing the 10–13 kWh row, while a Surry Hills terrace with a light evening load may only need the 5 kWh line at $8,050.
Cost of adding a battery to existing solar in Sydney
Adding a battery to an existing Sydney system starts with the inverter. A battery-ready hybrid inverter swap is $2,300–$4,600 installed, so a 10–13 kWh battery at $12,650 plus the swap at $3,450 comes to $16,100.
Ask the installer to say on the quote whether the current inverter stays or goes. If it stays, the battery line is the whole job; if it goes, the swap sits on top. A like-for-like string inverter replacement at $1,150–$3,450 is a separate job and does not make the system battery-ready.
Solar Cost in Sydney by System Size
Say a household takes the 13 kW large-home system with a 13.5 kWh battery. The low ends are $11,500 and $13,800, together $25,300; the high ends are $18,400 and $19,550, together $37,950. Each part can then be read against its own row.
Sydney homes divide between three bedrooms and four or more, which is why both the 6.6 kW and the larger rows come up. A pool pump or a car charger at home points toward the 10 kW row or the large-home band. A terrace or semi may have a narrow or split roof, and the layout can call for tilt frames or an extra string of panels, which lift the price.
Solar Cost in Sydney: What the Quote Should Include
Sydney roofs range from detached houses to terraces, semis and apartment buildings, and the roof decides the price as much as the system size. A good solar quote here shows which type of roof it assumes and lists any frames, strings or optimisers on separate lines.
- System size in kW and panel count, with a standard 6.6 kW system set against its $4,600–$9,800 installed band and the 13 kW large-home system against $11,500–$18,400 installed.
- Which roof faces carry the panels, north, east or west, with any second string of panels or tilt frames for a narrow or split terrace roof listed as items.
- Micro-inverters or optimisers priced as a choice where a neighbouring building or a tree shades part of the roof, against a plain string inverter.
- Inverter work as a line: a like-for-like string swap at $1,150–$3,450 installed, or a battery-ready hybrid at $2,300–$4,600 installed.
- A battery in kWh as its own line, with a 5 kWh unit at $5,750–$10,350 installed and a 10–13 kWh unit at $9,200–$17,250 installed.
- A smaller 3 kW or 5 kW array quoted separately from the larger systems, with the labour, wiring and inverter shown so they can be compared.
- For an apartment building, the owners corporation or strata leading the project, with consent for the common property.
- A cracked tile or rusted sheet repaired before installation, because lifting panels later is paid labour.
- Warranties as three lengths, the install date, and GST stated as included or extra.
Frequently Asked Questions — Solar Cost in Sydney
Our Methodology
These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed November 2026. Read our full methodology →