6.6 kW system
$4,000–$8,500
Standard panels, installed · typically $6,000
- The long-standing standard size for an Australian home
- Fits most roofs
- Lowest price
10 kW system
$6,000–$12,000
Standard panels, installed · typically $9,000
- More panels, so more roof space
- Covers bigger daytime loads, an electric car or a battery
- Check your network’s export limit first
13 kW system
$10,000–$16,000
Installed · typically $13,000
- For large homes with high use
- Needs a big, unshaded roof
- May need network approval or three-phase power
The short answer
A 6.6 kW system is $4,000 to $8,500 installed with standard panels, and a 10 kW system is $6,000 to $12,000. The larger system costs more in total, but not in proportion to its size, because the installer's visit and the paperwork are much the same either way. The Australian Government's YourHome guide notes that the average installation size now exceeds 10 kW.
- Choose 6.6 kW for a smaller household, a small roof, or the lowest outlay.
- Choose 10 kW if you run air conditioning in the day, plan an electric car, or want to add a battery.
- Choose 13 kW ($10,000 to $16,000) only for a large home with high daytime use and the roof to carry it.
Solar Cost in your city
Installed prices by size
| System | Low | Typical | High | Basis |
|---|---|---|---|---|
| 6.6 kW, standard panels | $4,000 | $6,000 | $8,500 | supplied and installed |
| 6.6 kW, premium panels | $6,500 | $8,000 | $10,500 | supplied and installed |
| 10 kW, standard panels | $6,000 | $9,000 | $12,000 | supplied and installed |
| 10 kW, premium panels | $10,000 | $12,500 | $15,000 | supplied and installed |
| 13 kW, large home | $10,000 | $13,000 | $16,000 | supplied and installed |
National price bands from the price table in our solar cost guide, GST included. The federal solar discount is normally handled by your installer and shows on your quote. Our solar rebates guide explains how it works. City pages carry the prices for your city.
Standard or premium panels?
Premium panels add to the price at either size: $6,500 to $10,500 for 6.6 kW and $10,000 to $15,000 for 10 kW. Part of what you pay for is the output guarantee. Most panels come with a guarantee that after 25 years they will still generate 80 percent (budget panels) to 90 percent (premium panels) of their original power output.
What limits the size you can install
- Roof space and shade. More kilowatts means more panels, and they need unshaded roof facing the sun.
- Your network’s export limit. Power export limits may be applied by your local network operator, which caps how much surplus you can send to the grid.
- The inverter. String inverters are the most common type for households and generally the cheapest option. A hybrid inverter can be a suitable choice if you plan to add a battery soon.
- Your daytime use. Solar pays best when you use the power yourself, so size to what the house runs in daylight hours.
Adding a battery later
A bigger array makes more sense if a battery is in the plan, because there is surplus to store. A mid-range battery is $8,000 to $15,000 on our table. If your existing system has a standard inverter, a battery-ready hybrid inverter swap is $2,000 to $4,000.
6.6 kW vs 10 kW: for and against
6.6 kW
For
- Lowest total price
- Fits a typical suburban roof
- Simple to connect on single-phase power
Against
- Less surplus for a battery or an electric car
- Can fall short in summer with air conditioning running
- Adding panels later usually costs more than buying them now
10 kW
For
- More output for one installation visit
- Room to add a battery and charge a car
- Covers large daytime loads
Against
- Higher total price
- Needs more unshaded roof
- An export limit can cap what you send to the grid
Which should you choose?
- Couple or small family, out during the day: 6.6 kW.
- Family home with daytime air conditioning or a pool pump: 10 kW.
- Planning a battery or an electric car: 10 kW, with a hybrid inverter.
- Large home on three-phase power: price 13 kW alongside 10 kW.
- Small or shaded roof: the roof decides. Fit what it can carry in full sun.
The solar calculator estimates output and payback for your city, and our solar + battery vs solar only guide covers the battery decision. State rebates are in the solar rebates guide.
Frequently asked questions
How much does a 6.6kW solar system cost?
A 6.6 kW system with standard panels is $4,000 to $8,500 installed on our national table, and $6,500 to $10,500 with premium panels.
How much does a 10kW solar system cost?
A 10 kW system with standard panels is $6,000 to $12,000 installed on our national table, and $10,000 to $15,000 with premium panels.
Is a 10kW system worth it over 6.6kW?
It is if you can use or store the extra power: daytime air conditioning, a pool pump, an electric car or a battery. If the house is empty all day and you have no battery plans, 6.6 kW costs less and wastes less.
How much does a 13kW solar system cost?
A 13 kW system for a large home is $10,000 to $16,000 installed on our national table.
Will my network let me install 10kW?
It depends on your local network operator, which may apply power export limits. Your installer applies for the connection and will tell you the limit before you sign.
Know which size you want? Get quotes from local solar installers and compare them against the rows above.
Get solar quotes →Where these figures come from
Every price on this page is a row of the national price table in the cost guide named below, so it moves when that guide is re-priced. Worked examples are a stated size multiplied by a row, with the working shown. Anything that is not a price is taken from the official pages listed. Prices are guides, not quotes: your site, access and finish level decide the figure.
- Prices: the national price table in our solar cost guide, checked November 2026
- YourHome: Rooftop solar (Australian Government) (yourhome.gov.au) · source