Ceramic tiles

$20–$55

Tile supply, per m² · typically $35

  • The cheapest tile to buy
  • Softer, so it cuts and drills easily on walls and splashbacks
  • Glazed face over a clay body: a chip shows the colour underneath

Porcelain tiles

$50–$120

Tile supply, per m² · typically $70

  • Denser and harder wearing underfoot
  • Takes up less water, so it suits wet areas and outdoors
  • Harder to cut and drill, which slows fiddly work

The short answer

Ceramic is the cheaper tile to buy: $20 to $55 per m² for a budget ceramic against $50 to $120 per m² for a mid-range porcelain, supply only. Laying a standard-size tile costs the same whichever you choose ($40 to $90 per m² for floors), so on most jobs the difference is the tile itself.

  • Choose ceramic for walls, splashbacks and rooms that see light wear, where the saving matters more than toughness.
  • Choose porcelain for floors that take daily wear, for wet areas and for anything outdoors.
  • Large-format porcelain costs more to lay as well as to buy: $60 to $110 per m² for labour.

What each tile costs to buy

Tile prices are quoted per square metre, supply only. Ceramic sits at the bottom of the range. Porcelain starts near the top of the ceramic range, and large-format and outdoor porcelain have their own price rows.

Tile (supply only)LowTypicalHighBasis
Ceramic, budget$20$35$55per m²
Ceramic, subway and splashback$30$50$100per m²
Porcelain, mid-range$50$70$120per m²
Porcelain, large format (600 × 1200 and larger)$50$85$160per m²
Porcelain, outdoor non-slip$40$65$120per m²

National price bands from the price table in our tiling cost guide, GST included. City pages carry the prices for your city.

What it costs to lay them

Tilers price by the square metre of tile laid. Our national table has one labour row for standard floor tiling and one for standard wall tiling, and neither changes with the tile material. What does change the labour price is the size of the tile and where it goes: large-format tiles need a flatter floor and two people to handle, and outdoor work has its own row.

Tiling labourLowTypicalHighBasis
Floor tiling, standard tile$40$60$90per m²
Floor tiling, large-format tile$60$85$110per m²
Wall tiling, standard tile$40$60$100per m²
Outdoor and patio tiling$50$75$110per m²
Waterproofing a wet area$35$55$80per m²
Removing existing tiles$20$35$55per m²
Floor levelling and preparation$15$30$50per m²

National price bands from the price table in our tiling cost guide, GST included. Labour only unless the row says otherwise. City pages carry the prices for your city.

Worked example: a 20 m² floor

Here is the same 20 m² living-room floor priced three ways: the tile plus the labour to lay it, each at the typical rate on our table.

FloorWorking (typical rate)At the typical rateLow to high
Budget ceramic, standard size20 × ($35 + $60)$1,900$1,200–$2,900
Mid-range porcelain, standard size20 × ($70 + $60)$2,600$1,800–$4,200
Large-format porcelain20 × ($85 + $85)$3,400$2,200–$5,400

20 m² × (tile supply + laying labour) from our national tiling table. Not included, because each has its own row: removing old tiles ($20 to $55 per m²), floor levelling ($15 to $50 per m²) and waterproofing in a wet area ($35 to $80 per m²).

Porcelain vs ceramic: for and against

Ceramic

For

  • Lowest tile price, which adds up fast on big wall areas
  • Easy to cut around taps, niches and power points
  • Wide choice of colours and glazes for walls and splashbacks

Against

  • Wears faster than porcelain on a busy floor
  • A chipped glaze shows the clay body
  • Not the usual choice outdoors or where water sits

Porcelain

For

  • Stands up to daily foot traffic
  • Low water uptake suits bathrooms, laundries and outdoor areas
  • Comes in large formats and outdoor non-slip finishes

Against

  • Costs more per square metre to buy
  • Large formats cost more to lay and need a flatter floor
  • Harder to cut, so detailed cuts take longer

Which should you choose?

Want the numbers for your own room? The tile calculator works out the tiles to buy and prices the job for your city, and our tiling cost guide has every row.

Frequently asked questions

Is porcelain tile more expensive than ceramic?

Yes. On our national table a budget ceramic tile is $20 to $55 per m² and a mid-range porcelain is $50 to $120 per m², supply only. Large-format porcelain is $50 to $160 per m².

Does porcelain cost more to lay than ceramic?

Not for standard sizes: floor tiling labour is $40 to $90 per m² whichever tile you choose. Large-format tiles have their own labour row at $60 to $110 per m², and most large-format tiles are porcelain.

How much does it cost to tile a 20 m² floor?

At the typical rates on our national table, 20 m² of budget ceramic comes to $1,900 for tile and laying, and 20 m² of mid-range porcelain comes to $2,600. That is 20 × the typical tile price plus the typical laying rate, before any tile removal, levelling or waterproofing.

Can I use ceramic tiles on a bathroom floor?

You can, provided the tile is sold for floors and has enough grip when wet. The waterproofing under the tile does the sealing either way, and it has its own row: $35 to $80 per m².

Which is better outdoors, porcelain or ceramic?

Porcelain. Outdoor non-slip porcelain is $40 to $120 per m² to buy and outdoor laying is $50 to $110 per m² on our national table.

Ready to price your floor or bathroom? Get quotes from local tilers and compare them line by line against the rows above.

Get tiling quotes →

Where these figures come from

Every price on this page is a row of the national price table in the cost guide named below, so it moves when that guide is re-priced. Worked examples are a stated size multiplied by a row, with the working shown. This page makes no claim that is not a price or a plain description of the products. Prices are guides, not quotes: your site, access and finish level decide the figure.

  1. Prices: the national price table in our tiling cost guide, checked November 2026

Related guides