Updated November 2026· Independently researched·14 min read
Most tiling jobs in Byron Bay cost $42–$105/sqm
labour only, depending on tile type
Standard floor tiling in Byron Bay costs $42–$94/sqm for labour. Wall tiling is $42–$105/sqm. A full bathroom (floor + walls) runs $1,575–$4,725 in labour alone. Tile supply is separate.
+3.8%Tiling costs in Byron Bay are up around 3.8% over the past year, re-verified against 90+ sources in November 2026.Year on year
Tiling in Byron Bay costs $42–$94/sqm for standard floor tiling (labour only), $42–$105/sqm for wall tiling, and $84–$180/sqm for mosaic or feature work. A full bathroom tiling job runs $1,575–$4,725 in labour. Tile supply is additional — budget $21–$260/sqm depending on the material.
Comparing cities, or after the Australia-wide picture? See the national guide: Tiling cost in Australia.
Quick answerTiling in Byron Bay costs $42–$94 /sqm, with most averaging $63 /sqm. GST included — verified November 2026. Get free Byron Bay quotes →
Tiling Prices in Byron Bay 2026: Cost Table, Price List and Hourly Rates
Service
Low
Typical
High
Floor tiling — standard (labour)
$42/sqm
$63
$94
Floor tiling — large format (labour)
$63/sqm
$89
$115
Wall tiling — standard (labour)
$42/sqm
$63
$105
Mosaic / feature tiling (labour)
$84/sqm
$125
$180
Full bathroom tiling, floor + walls (labour)
$1,575total
$3,150
$4,725
Outdoor / patio tiling (labour)
$52/sqm
$79
$115
Tile removal (existing)
$21/sqm
$37
$58
Waterproofing (wet areas)
$37/sqm
$58
$84
Floor levelling / prep
$16/sqm
$32
$52
Tile supply — budget ceramic
$21/sqm
$37
$58
Tile supply — mid-range porcelain
$52/sqm
$74
$125
Tile supply — premium natural stone
$105/sqm
$160
$260
Tiler (hourly rate)
$52/hr
$74
$105
Tiler day rate
$525per day
$660
$840
Tile supply — large format porcelain (600×1200 and larger)
Standard tiles (300×300 to 600×600) cost $42–$94/sqm to lay in Byron Bay. Large format (600×1200+) cost more ($63–$115/sqm) due to difficulty. Mosaics are the most expensive ($84–$180/sqm).
Floor vs wall
Wall tiling in Byron Bay ($42–$105/sqm) costs slightly more than floor tiling ($42–$94/sqm) due to the extra difficulty of working vertically and cutting around fixtures.
Surface preparation
Uneven surfaces in your Byron Bay home need levelling ($16–$52/sqm) before tiling. Old tiles may need removing ($21–$58/sqm). Proper prep is essential for a lasting result.
Waterproofing
Wet areas (bathrooms, laundries) in Byron Bay require waterproofing or water-resistant protection ($37–$84/sqm) before tiling. This is required under the National Construction Code, and in NSW a contractor licence is needed for waterproofing work valued at more than $5,000 in labour and materials.
Pattern complexity
Straight lay is cheapest. Herringbone, diagonal, and feature patterns take longer and cost more in Byron Bay. The pattern should be agreed before work starts.
Tile supply (separate cost)
Budget ceramic tiles start at $21/sqm. Mid-range porcelain is $52–$125/sqm. Premium natural stone can be $105–$260+/sqm in Byron Bay. This is on top of labour costs.
How to Save Money on Tiling Cost in Byron Bay
1
Get quotes from experienced Byron Bay tilers — ask for labour-only and supply-and-install prices to compare
2
Buy 10% extra tiles for cuts and wastage — matching tiles later from a different batch may show colour differences
3
Ask about waterproofing separately if tiling wet areas in Byron Bay — it's mandatory and should be quoted as a line item
4
Large format tiles look great but cost more to install and require a perfectly level surface
5
Check your tiler's previous work and references — tiling quality varies enormously
6
Don't choose tiles based solely on price — cheap tiles that chip or crack in your Byron Bay home cost more long-term
Before you commit — compare your options
Side-by-side guides covering the decisions that most change your final tiling cost.
Quick answerByron Bay tiling is priced by the square metre, so each extra metre adds the same laying rate again: $42–$94 a square metre for a standard tile, or $63–$115 for large-format porcelain.
Labour and tiles both scale with the room, and big tiles carry their own laying row. As an illustration, a 36 square metre open living floor in a Suffolk Park house, laid in 600×1200 porcelain at $63–$115 a square metre, comes to $2,268–$4,140 in labour before the tile itself is bought.
What moves a floor that size here: the pattern, since herringbone or diagonal means cut tiles along every wall; the base, levelled at $16–$52 a square metre if the slab dips; and the drive, with travel to Mullumbimby or Bangalow listed on its own line rather than spread through the rate.
Tiling Cost in Byron Bay: What the Quote Should Include
Byron Bay tiling jobs stretch from Belongil and Wategos out to Mullumbimby and the hinterland, so a quote should say what travel adds as well as what each square metre costs. Itemised lines also show whether removal, levelling and the membrane are in the price.
Travel to Mullumbimby, Talwood Estate or the hinterland shown as a separate charge or stated as included.
Floor area and wall area as separate square-metre figures, with standard floor laying at $42–$94 a square metre.
The pattern chosen, straight, herringbone or diagonal, with the labour rate that goes with it.
Mosaic or feature panels counted apart from the plain tiles and laid at $84–$180 a square metre.
Old tiles removed at $21–$58 a square metre, plus where the rubble goes and who pays for the skip.
The wet-area membrane listed with its square metres and product name, not folded into a bathroom total.
Grout, silicone, trims and any sealing listed as included or extra, along with the clean-up at the end.
Start and finish dates, the deposit and stage payments, the warranty terms and GST written down.
Frequently Asked Questions — Tiling Cost in Byron Bay
How much do tilers charge to tile a floor in Byron Bay?
Our Byron Bay table puts labour for standard floor tiles at $42–$94 a square metre and labour for large-format floor tiles at $63–$115 a square metre.
How much does it cost to tile a bathroom in Byron Bay?
Labour to tile a full bathroom, floor and walls is $1,575–$4,725 in our Byron Bay table, typically $3,150.
How much is tiling per square metre in Byron Bay?
Our Byron Bay table puts floor tiling labour at $42–$94 a square metre, wall tiling labour at $42–$105 a square metre and outdoor tiling labour at $52–$115 a square metre.
What does labour to lay standard wall tiles cost in Byron Bay?
In our Byron Bay table, labour to lay standard wall tiles runs $42–$105 a square metre, and $63 is typical.
How much does labour to lay large-format floor tiles cost in Byron Bay?
Labour to lay large-format floor tiles is $63–$115 a square metre in our Byron Bay table, typically $89.
How much should I pay for removing existing tiles in Byron Bay?
Our Byron Bay prices for removing existing tiles start at $21 and reach $58 a square metre, with $37 typical.
What does a tiled pool surround cost in Byron Bay with non-slip porcelain?
Around a pool in Byron Bay, outdoor laying is $52–$115 a square metre and non-slip outdoor porcelain $42–$125 a square metre. A 25 square metre surround at the typical $79 and $68 comes to about $3,675. Coping, steps and a fall away from the water add cuts and time, so ask for them to be priced in, and in Suffolk Park or Mullumbimby ask whether travel is charged.
What does a Byron Bay bathroom cost to tile if the tiler supplies the tiles?
Supplied and laid, a standard bathroom in Byron Bay is $2,950–$7,900, with $5,250 typical; labour alone is $1,575–$4,725 (typically $3,150) if you buy your own tiles. The typical gap of $2,100 is what the tiler's tiles and materials add. Neither figure covers waterproofing, which is $37–$84 a square metre on top, so ask for it as a separate line before comparing quotes from Belongil to Suffolk Park.
What does a Byron Bay tiler charge by the hour or day for small jobs?
Not every Byron Bay job suits a square-metre price. A regrout, a few cracked tiles or a shower niche repair can be billed at $52–$105 an hour, typically $74, and a full day costs $525–$840. Two hours at the typical rate is $148. Ask the tiler whether travel out to Mullumbimby or Talwood Estate is counted in the time, and whether materials are extra.
Our Methodology
These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed November 2026. Read our full methodology →
Tiler costs by Byron Bay suburb
Select your suburb for a tailored price guide including housing stock notes, parking factors, and nearby suburb comparisons.