Independent Australian Cost Guides
Updated November 2026
← All commercial trades

How much do commercial garage doors cost in Canberra?

Commercial garage doors run $2,900–$25,500
installed, depending on door type, size and automation
In Canberra, $2,900 buys an installed industrial roller shutter and $25,500 marks the upper end for a high-speed rapid-roll door, supplied and installed. A Phillip trade unit wanting an insulated PU-core sectional door should price the panel at $280–$380 per m² of door, supply only, before installation.
+5.0% Commercial garage door prices are up around 5.0% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Industrial Roller Shutter
$4,600
per commercial roller door, installed
Roller Shutter
$2,900–$12,250
Insulated
$280–$380/m²
Sectional
$3,500–$20,200
Roller $2,900Sectional $9,900High-speed $25,500

Commercial garage doors in Canberra cost $2,900–$25,500 installed, depending first on the door type and then on its size and automation. An industrial roller shutter starts the range and a high-speed rapid-roll door finishes it, while a motorised 4m x 4m roller door sits in between at $4,700–$7,650 installed.

Canberra's door work is concentrated in its planned industrial and service areas, chiefly Fyshwick, Mitchell and Hume, plus basement car parks and loading bays under offices and apartments in the town centres. Automation is a frequent request, and on a busy car park entry the operator does most of the work, so its duty rating matters as much as the door.

A motor or operator replacement costs $765–$2,550 per door and an annual service $155–$355 a year for each door. Roller door and shutter figures include GST; sectional, insulated-panel and rapid-roll figures are ex GST, as marked.

Comparing cities, or after the Australia-wide picture? See the national guide: How much do commercial garage doors cost in Australia?

Quick answerA commercial garage door costs $2,900–$25,500 installed depending on type — roller shutters at the low end, high-speed rapid-roll doors at the top. Get free commercial quotes →

Commercial Garage Door Prices in Canberra 2026: Cost Table and Price List

ServiceLowTypicalHigh
Industrial roller shutter (per door, installed)$2,900installed$4,600$12,250
Insulated commercial door (PU-core sectional, supply only, per sqm of door, ex GST)$280/sqm$330$380
Commercial sectional overhead door (installed, ex GST)$3,500installed$9,900$20,200
High-speed / rapid-roll door (supply + install, ex GST)$11,200supply+install$15,300$25,500
Roller door ~3m x 3m, manual (installed)$2,050installed$2,700$3,675
Roller door ~3m x 3m, motorised (installed)$3,275installed$4,275$5,600
Roller door ~4m x 4m, motorised (installed)$4,700installed$5,800$7,650
Roller door ~5m x 5m, motorised (installed)$6,100installed$7,450$10,200
Door motor / operator replacement$765per door$1,275$2,550
Annual door service (per door)$155per year$255$355
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local installer will be in touch about your job. No spam, no call centre.

Scoping a commercial garage door? Get a quote from an Australian commercial door installer — free, no obligation.

Get commercial quotes →
Prices verified November 2026 · Cross-referenced against Australian commercial garage door suppliers · See methodology

Prices include GST unless the row says ex GST. Canberra-wide, November 2026. Large or custom openings vary.

Commercial garage door types and what they cost

Industrial roller shutters

$2,900–$12,250 installed

The usual door on truck and forklift openings at depots in Fyshwick, Hume and Beard, where a steel curtain takes knocks and secures stock overnight. A wide bay, heavier curtain gauge and three-phase drive move a shutter up its band.

Commercial sectional overhead doors

$3,500–$20,200 installed, ex GST

Common on car dealer workshops in Phillip and on fitted-out showrooms, where the door is part of the frontage and glazed or insulated panels matter. Tracks run back under the ceiling, so headroom and any ducting above the opening shape the quote.

High-speed rapid-roll doors

$11,200–$25,500 supplied and installed, ex GST

Worth the price on openings crossed all shift, such as cold rooms and food distribution floors. A fabric curtain that opens and closes in seconds keeps heat in a working area through a Canberra winter and stops chilled air leaking out in summer.

Insulated commercial doors

$280–$380 supply only, per m² of door, ex GST

Double-skin PU-core sectional doors. Here the case is heating: a workshop or depot warmed on frosty mornings loses less through an insulated door. The rate covers supply only, so installation is quoted on top.

Pedestrian access doors

quoted per door

A separate steel door beside or set into the main opening lets staff come and go without running a large door. The price depends on the frame, lockset and whether it is cut into existing cladding, so ask for it as its own line.

Commercial vs residential garage doors — why commercial costs more

A basement car park door under an apartment block or office in Civic or Belconnen may open hundreds of times a day, so its operator, springs and guides are rated for that duty rather than the few trips a house door makes. Commercial openings are also wider and taller, curtains and panels are a heavier gauge, and installs often need an electrician, a lift platform and work outside trading hours. Tenant access control, safety beams and loop detectors add parts a home door never carries.

Commercial garage door sizes and how size drives price

Size sets the base price before anything else. In Canberra a motorised roller door for an opening near 3m x 3m runs $3,275–$5,600 installed, closer to 4m x 4m it is $4,700–$7,650, and near 5m x 5m $6,100–$10,200. Each step up adds curtain area and weight, which calls for a stronger spring barrel and a bigger operator. Openings between two sizes are made to measure, so give installers the exact width and height rather than a rounded figure.

What Actually Moves the Commercial Garage Door Cost in Canberra

How to Keep the Commercial Garage Door Cost Sane in Canberra

1
Count the daily openings on each door and ask for an operator sized to that number rather than the largest unit the installer stocks.
2
Insulate only doors on heated or cooled space; an unheated storage bay in Mitchell rarely earns back the extra cost of PU-core panels.
3
Book servicing in autumn at $155–$355 a year per door, so springs, seals and limits are set before cold mornings start loading the motor.
4
Ask for the insulated and uninsulated price side by side on the same door, then weigh the difference against what the site spends on winter heating.
5
Ask whether the existing guides, drum or tracks can stay; replacing only a worn operator at $765–$2,550 per door can beat buying a whole new door.

Commercial garage door cost by door type

Quick answerIn Canberra an industrial roller shutter costs $2,900–$12,250 installed, a commercial sectional overhead door $3,500–$20,200 installed ex GST, and a high-speed rapid-roll door $11,200–$25,500 supplied and installed ex GST.

The choice in Canberra usually turns on what sits behind the door. A shutter suits stock, plant and vehicles in an unheated shed. A sectional suits a heated workshop or a showroom that faces customers, and its insulated version is priced per m² of door. A rapid-roll door belongs on an opening crossed by forklifts all day, often as a second door inside a shutter that closes the building at night. Automation and access control are priced on top of any of the three.

Our Methodology

Commercial pricing on this page is compiled from Australian commercial and industrial garage-door suppliers and installers, published supplier price guides and product ranges as of November 2026. We cross-reference ranges from multiple sources; no contractor can influence a published figure. All prices are estimates, GST-inclusive unless a row says ex GST, and will vary with your specific opening, door spec and site. Always get multiple written quotes. Last reviewed November 2026. Read our full methodology →

Commercial garage door prices, product by product

Industrial roller shutters cover most warehouse and depot openings across Fyshwick, Hume and Mitchell, at $2,900–$12,250 installed, typically $4,600. A narrow store-room shutter on a single-phase motor sits near the bottom; a wide truck opening with a heavy curtain, wind locks and a three-phase operator moves towards the upper figure. Ask how the bottom rail seals against the slab and what the guides are made of.

Commercial sectional overhead doors run $3,500–$20,200 installed ex GST, typically $9,900. A single-skin door on a service bay sits low; a wide glazed door with a pass door and heavy operator sits high. The insulated PU-core version is $280–$380 per m² of door, supply only and ex GST, so supply for a 4m x 4m opening comes to about $4,480–$6,080, with installation quoted on top.

A rapid-roll door is $11,200–$25,500 supplied and installed ex GST, typically $15,300. Its fabric curtain opens in seconds and many designs reset themselves if a forklift clips them, which suits internal openings between a heated dispatch area and a cold store. Radar, pull-cord or floor-loop activation, and whether the door faces the weather, decide the final figure.

Operators wear out before curtains do. A replacement motor costs $765–$2,550 per door, from light units on small roller doors to three-phase drives on wide shutters. Servicing at $155–$355 a year per door covers spring tension, guide wear, limit settings and a safety reversing test, and a door that runs all shift may need a second visit each year.

Commercial garage doors — go deeper

Which door for which job?

Depots, trade sheds and storage in Hume, Fyshwick and Beard: an industrial roller shutter or a motorised roller door gives security for the lowest installed price, and a shed that is never heated has no use for insulated panels.

Showrooms, dealership service bays and heated workshops, such as those in the Phillip trade area in Woden: a sectional door looks neater from the street, takes glazing, and its insulated version keeps a heated floor comfortable through winter.

Cold rooms, food distribution and busy internal openings: a rapid-roll door, sized to the forklift traffic as much as to the opening. Basement car parks under apartments in Gungahlin or Belconnen are a separate case, where a heavy-duty operator matters more than the door type.

Red flags when comparing commercial door installers

Commercial garage door cost in Canberra by door type and winter use

Commercial garage doors in Canberra fall into four price bands. Motorised roller doors around 3m x 3m cost $3,275–$5,600 installed, and around 5m x 5m $6,100–$10,200 installed. Industrial roller shutters run $2,900–$12,250 installed. Commercial sectional overhead doors cost $3,500–$20,200 installed ex GST, typically $9,900. High-speed rapid-roll doors cost $11,200–$25,500 supplied and installed ex GST.

Canberra's cold winters and frosty mornings shape the choice. Workshops, depots and government facilities in Fyshwick, Mitchell, Hume and Beard often choose insulated sectional doors to hold heat, with panels at $280–$380 per square metre of door, supply only ex GST. Frozen seals and stiff springs on cold mornings put extra load on motors, and replacing a worn operator costs $765–$2,550 per door. Car park and basement doors under office blocks in Civic, Belconnen and Woden see constant cycling and need regular attention.

An annual service costs $155–$355 a year per door, and booking it before winter catches spring and seal problems early. A good Canberra commercial garage door quote should state the door type and opening size, insulation value and panel thickness for sectionals, the motor duty rating matched to expected daily cycles, safety beams and access controls, whether prices include GST, and the service interval recommended for the site.

What a Compliant Commercial Garage Door Quote Includes — Cost in Canberra

Canberra commercial garage door quotes should read like a specification, not a number. Insist on the door build, the price basis for each line and the site assumptions, because frost, long drives between town centres and shopfront trading hours all shift the figure.

Frequently Asked Questions — Commercial Garage Door Cost in Canberra

What does an industrial roller shutter cost for a Fyshwick or Mitchell warehouse?
An industrial roller shutter for a Canberra warehouse costs $2,900–$12,250 installed, typically $4,600 installed. Depots and warehouses in Fyshwick, Mitchell and Hume pay more when the door is very wide, has a heavier curtain or runs on a three-phase operator. Draught seals, a pass door or a vision panel are extras worth asking about before the quotes come in.
How much does a panel lift door cost for a Canberra commercial site?
A commercial panel lift door, also called a sectional overhead door, costs $3,500–$20,200 installed in Canberra, ex GST, typically $9,900 ex GST. Single doors on showrooms and service bays sit lower in the band, while wide doors with windows, a pass door and a heavy operator sit higher. The tracks run back under the ceiling, so have the headroom and side room measured before asking for prices.
How much does a commercial door cost to install in Canberra?
Prices in our Canberra table: a motorised roller door about 3 m x 3 m at $3,275–$5,600 installed (typically $4,275); a commercial sectional overhead door at $3,500–$20,200 installed (typically $9,900); an industrial roller shutter at $2,900–$12,250 installed (typically $4,600).
How much is an automated roller door for a Canberra business?
An automated roller door for a Canberra business costs $3,275–$5,600 installed at around 3m x 3m and $4,700–$7,650 installed at around 4m x 4m. The motor, remotes or wall button and safety beams sit inside that price. On frosty mornings a motor works harder against stiff seals and springs, so ask for an operator matched to the door's weight rather than the smallest unit that fits.
What does a high-speed door cost for a Canberra warehouse or loading dock?
Canberra prices for a high-speed or rapid-roll door run $11,200–$25,500 supply and install, ex GST, typically $15,300 supply and install. These fabric-curtain doors open and shut quickly, which suits busy internal openings, cold rooms and docks where a slow door lets heat escape in a Canberra winter. Opening size, wind bracing for external use and the activation controls, such as radar or pull cords, set where a job lands.
Are insulated sectional doors worth it for Canberra's cold winters?
For a heated Canberra workshop, office or depot, an insulated door helps hold warmth through frosty winters and cuts draughts. Insulated PU-core panels run $280–$380 per square metre of door, ex GST, with fitting charged on top. A plain unheated storage shed gains little from insulation, so a standard motorised roller door may be the better spend there.
How much does an annual commercial door service cost in Canberra?
An annual service on a commercial door in Canberra costs $155–$355 per door, with $255 the typical charge. Frosty mornings stiffen springs and thicken old grease, so a Canberra service should include fresh lubricant rated for cold, a spring tension check, motor force and limit settings and the safety reversing test. Showroom and service bay doors in Fyshwick, Belconnen and Tuggeranong that open from before dawn in winter wear fastest, and a booked service each autumn gets them ready before the cold sets in.
What does replacing a commercial door motor cost in Canberra?
A new motor or operator for a commercial door in Canberra is $765–$2,550 per door, typically $1,275 per door. Compact units on small roller doors at Gungahlin or Woden shopfronts sit at the lower end; three-phase operators driving wide shutters at Hume or Mitchell depots sit high. Cold winters are hard on motors that strain against frozen seals, so ask for the replacement to include a force setting suited to the door weight, new safety beams if the old ones are tired, and fresh remotes paired on the day.
How much is a 5m x 5m roller door for a Canberra truck bay?
A motorised roller door around 5m by 5m costs $6,100–$10,200 installed in Canberra, and $7,450 is typical. That size suits truck, bus and plant openings at Hume, Beard and Mitchell yards. Stepping down to around 4m by 4m brings the figure to $4,700–$7,650 installed. On a wide door the operator, curtain gauge and whether a crane is needed to lift the drum into place decide where a quote lands; a lintel or steel frame repair before fitting is normally a separate line.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage