Updated November 2026·Independently researched·10 min read
Test and tag in Brisbane runs $3.50–$9.50 per item
for a job of 1 to 50 items, as published by testers (most ex GST) - larger jobs, minimum charges, RCD and exit light tests below
A Milton practice with a small count of laptops, printers and a staff kitchen sits at $3.50–$9.50 per item, $5.50 typical, and usually on the minimum site charge of $89–$250 rather than the per-item sum. An Acacia Ridge hire yard turning over tools, leads and chargers in volume prices at $2.10–$4.95 per item once the count passes 200.
+4.9%Test and Tag costs in Brisbane are up around 4.9% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical per-item rate in Brisbane, 1-50 items
$5.50
per item tested and tagged, Brisbane 2026, as published
Test and tag, 1-50 items
$3.50-$9.50
Test and tag, 51-200 items
$3.20-$6
Test and tag, 200+ items
$2.10-$4.95
$3.50$5.50$9.50
In Brisbane a test and tag quote is a per-item rate with volume breaks: $3.50–$9.50 per item for a job of 1 to 50 items, $3.20–$6 per item for 51 to 200 and $2.10–$4.95 per item for 200 or more. Under a stated count the minimum site charge of $89–$250 applies instead, so a Given Terrace Paddington cafe or a Boundary Street West End shop pays the minimum rather than a per-item total.
Where two Brisbane quotes diverge is access and the items that are not appliances. A Queen Street Mall or South Bank tower floor is an after-hours booking with a dock slot; a business spread across Milton, Newstead and Upper Mount Gravatt is three visits, each with its own minimum. Fixed safety switches are priced at $5–$20 per unit, portable RCDs at $5.49–$12 per unit and emergency and exit lights at $7–$20 per fitting, counted apart from the appliances and shown on their own lines.
Then come the lines a kitchen or a shed adds: microwave leakage tests at $5–$30 per unit in a Fortitude Valley kitchen, three-phase equipment at $4–$9.50 per item in an Eagle Farm or Yatala shed, fire extinguisher or fire blanket inspections at $10–$35 per unit when bundled with the visit, extension leads and power boards at $2–$8 per item, and a plug top replaced on the spot at $15–$55 per item. A Richlands site nobody has counted is quoted at the hourly rate of $60–$150.
Quick answerTest and tag in Brisbane runs $3.50–$9.50 per item for a job of 1 to 50 items in 2026, $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, with a minimum site charge of $89–$250 where the item count is small. Fixed RCD tests add $5–$20 per unit and emergency and exit light tests $7–$20 per fitting. Prices are as published by testers, most of them ex GST. Get free Brisbane quotes →
Test and Tag Prices in Brisbane 2026: Cost Table and Price List
Service
Low
Typical
High
Test and tag, 1-50 items
$3.50per item
$5.50
$9.50
Test and tag, 51-200 items
$3.20per item
$4.50
$6
Test and tag, 200+ items
$2.10per item
$3.50
$4.95
Minimum site charge or call-out
$89per visit
$125
$250
Fixed RCD test, push-button and trip time
$5per unit
$15
$20
Portable RCD test
$5.49per unit
$9.50
$12
Emergency and exit light test, six-monthly
$7per fitting
$12
$20
Microwave leakage test
$5per unit
$15
$30
Three-phase equipment test
$4per item
$8
$9.50
Fire extinguisher or fire blanket inspection, with a test-and-tag visit
$10per unit
$15
$35
Hourly rate, unknown item count or complex site
$60per hour
$90
$150
Extension lead or power board test
$2per item
$5
$8
Plug top replaced on site
$15per item
$25
$55
Scoping test and tag work in Brisbane? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Greater Brisbane, November 2026.
What does test and tag cost per item in Brisbane?$3.50–$9.50 per item for a small job of 1 to 50 items, $5.50 typical. The rate steps down with volume: $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, and most testers apply a minimum site charge of $89–$250.
What gets added to a Brisbane test and tag quote?Fixed RCD push-button and trip-time tests at $5–$20 per unit, portable RCDs at $5.49–$12 per unit, emergency and exit lights at $7–$20 per fitting, microwave leakage tests at $5–$30 per unit, three-phase equipment at $4–$9.50 per item, and a plug top replaced on the spot at $15–$55 per item.
Worked Test and Tag Cost Scenarios — Brisbane
Three Brisbane jobs priced from this page's rows: a Milton accounting practice, an Acacia Ridge hire yard and a Howard Smith Wharves bar kitchen. Each line names the row it draws on; the quote you receive prices your own count and access.
Milton accounting practice. An accounting practice on one Milton floor has its laptops, docks, printers and staff-kitchen appliances tested at $3.20–$6 per item ($4.50 typical) once the count passes 50, the fixed safety switches on the board at $5–$20 per unit and the emergency and exit lights at $7–$20 per fitting in a single evening visit, with the register handed to the practice manager before the tester leaves.
Acacia Ridge hire yard. A hire yard in Acacia Ridge runs tools, leads, chargers and plant past 200 items at $2.10–$4.95 per item on a rolling booking tied to its return bench, with three-phase equipment at $4–$9.50 per item on its own line, extension leads and power boards at $2–$8 per item and the portable RCDs that go out with each hire at $5.49–$12 per unit; failed plug tops are replaced at the bench at $15–$55 per item so the tool goes back on the shelf.
Howard Smith Wharves bar kitchen. A bar and kitchen at Howard Smith Wharves with a small count of blenders, glass washers, toasters and under-bench fridges pays the minimum site charge of $89–$250 ($125 typical) rather than the $3.50–$9.50 per-item rate, adds microwave leakage tests at $5–$30 per unit and has the extinguishers and fire blankets inspected at $10–$35 per unit on the same mid-morning visit before doors open.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping test and tag work in Brisbane? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Greater Brisbane, November 2026.
Test and Tag Costs by Sector in Brisbane
Brisbane's test and tag work spans the CBD, Milton and Newstead office floors, the venues of Fortitude Valley, Howard Smith Wharves and South Bank, the strips at James Street Fortitude Valley, Oxford Street Bulimba, Given Terrace Paddington and Boundary Street West End, the sheds of Eagle Farm, Yatala, Richlands and Acacia Ridge and the centres at Chermside, Garden City and Indooroopilly.
CBD, Milton and Newstead office floors - Laptops, docks, printers and kitchenettes at $3.50–$9.50 or $3.20–$6 per item by count, fixed safety switches at $5–$20 per unit and emergency and exit lights at $7–$20 per fitting on separate lines; the after-hours window and the dock booking are what to check on a tower quote.
Eagle Farm, Yatala, Richlands and Acacia Ridge sheds - Sites that pass 200 items at $2.10–$4.95 per item, three-phase equipment at $4–$9.50 per item, portable RCDs at $5.49–$12 per unit, leads and power boards at $2–$8 per item and the on-the-spot plug top at $15–$55 per item; hire yards book around the return bench and ask for the failed-item list in the register.
Fortitude Valley, South Bank and Howard Smith Wharves venues - Small counts that land on the minimum of $89–$250, microwave leakage tests at $5–$30 per unit and fire extinguisher and fire blanket inspections at $10–$35 per unit on the same visit; the booking is before doors open, and a group with several venues pays a minimum at each.
James Street, Oxford Street Bulimba, Given Terrace and Boundary Street retail - A single shop sits in the $3.50–$9.50 per-item band or on the minimum of $89–$250; a chain with tenancies at Westfield Chermside, Westfield Garden City and Indooroopilly is priced as spread-out sites, each with its own minimum, and the quote should list them.
Upper Mount Gravatt schools, gyms, childcare and cleaners - Schools and gyms pass 51 items and price at $3.20–$6 per item; childcare centres and cleaning contractors with equipment that moves between sites often take the hourly rate of $60–$150 where the count cannot be stated, with the register and report the deliverable to insist on.
What a Compliant Test and Tag Quote Includes — Cost in Brisbane
Before comparing Brisbane quotes, check each one prices the same item count in the same band, says whether the minimum site charge covers a stated number of items, and lists RCDs, exit lights, microwaves and three-phase equipment on their own lines with the GST basis stated.
The per-item rate and the band it sits in - 1 to 50, 51 to 200 or 200 or more items - at $3.50–$9.50, $3.20–$6 or $2.10–$4.95 per item
The minimum site charge at $89–$250 and exactly how many items it covers before the per-item rate starts
Fixed RCD push-button and trip-time tests at $5–$20 per unit and portable RCDs at $5.49–$12 per unit, counted separately from appliances
Emergency and exit light tests at $7–$20 per fitting, with the six-monthly discharge test named
Microwave leakage tests at $5–$30 per unit and three-phase equipment at $4–$9.50 per item as their own lines
Fire extinguisher and fire blanket inspections at $10–$35 per unit where bundled with the visit, and who services them otherwise
Extension leads and power boards at $2–$8 per item, and the on-site repair basis - a plug top replaced at $15–$55 per item
The tester's competency - a nationally accredited portable appliance testing course or an electrical licence - and the register and report included
A single GST basis across every line, with the retest interval the quote assumes and the tester's ABN and insurance
Test and tag cost in Brisbane: offices, sheds and venues
Test and tag cost in Brisbane is a per-item rate that falls with volume: $3.50–$9.50 per item for 1 to 50 items (typically $5.50), $3.20–$6 per item for 51 to 200 (typically $4.50) and $2.10–$4.95 per item for 200 or more (typically $3.50). Beneath the small end is the minimum site charge of $89–$250, and a Brisbane quote should state how many items that minimum covers before the per-item rate starts.
Access and plant write the remainder of a Brisbane quote. A Queen Street Mall or South Bank tenancy adds an after-hours window and a dock slot; a business with sites at Milton, Newstead and Upper Mount Gravatt adds a minimum per site; a Yatala or Richlands shed adds three-phase equipment at $4–$9.50 per item. Around the appliances sit fixed safety switches at $5–$20 per unit, portable RCDs at $5.49–$12 per unit, emergency and exit lights at $7–$20 per fitting, microwave leakage tests at $5–$30 per unit, fire extinguisher inspections at $10–$35 per unit, leads and power boards at $2–$8 per item and the plug top replaced on site at $15–$55 per item, with the hourly rate of $60–$150 for a site whose count is unknown.
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. The Queensland Electrical Safety Regulation 2013 sets the intervals in the regulation itself: for manufacturing work, double-insulated equipment at least once every year and other equipment at least once every 6 months; for service work, equipment used only for office work at least once every 5 years and otherwise at least once every year; for construction work, equipment must comply with AS/NZS 3012; amusement devices at least once every 6 months; safety switches tested by a competent person at the AS/NZS 3760 intervals; and hire equipment inspected and tested by a competent person before each hiring and tested and tagged at least once every 6 months, with records kept for at least 5 years. Have the Brisbane tester put the course or licence on the quote and name the register and report that stay on site after the visit.
Test and tag cost by item count and site type in Brisbane
Quick answerBrisbane pricing follows the count: a Given Terrace Paddington cafe or an Oxford Street Bulimba shop sits on the minimum of $89–$250 or in the $3.50–$9.50 per-item band, a Milton or Newstead office floor at $3.20–$6 per item, and an Eagle Farm or Acacia Ridge shed at $2.10–$4.95 per item.
The count moves a Brisbane test and tag price in bands. To 50 items the rate is $3.50–$9.50 per item, from 51 to 200 it is $3.20–$6 and from 200 it is $2.10–$4.95, so a James Street boutique and a CBD floor pay a different rate for the same printer. At the bottom the minimum site charge of $89–$250 replaces the per-item sum, which is the figure a South Bank kiosk or a West End cafe is actually quoted.
Site type adds the lines count cannot. A Yatala or Richlands shed adds three-phase equipment at $4–$9.50 per item, portable RCDs at $5.49–$12 per unit and leads and power boards at $2–$8 per item; a CBD or Milton office adds fixed safety switches at $5–$20 per unit and emergency and exit lights at $7–$20 per fitting; a Fortitude Valley kitchen adds microwave leakage tests at $5–$30 per unit and fire extinguisher inspections at $10–$35 per unit. Failed plug tops are swapped on the spot at $15–$55 per item, and an Eagle Farm site with no count goes to the hourly rate of $60–$150.
Frequently Asked Questions — Test and Tag Cost in Brisbane
What is the price of test and tag in Brisbane?
From our Brisbane table: $3.50–$9.50 per item for 1 to 50 items (typically $5.50); $3.20–$6 per item for 51 to 200 items (typically $4.50); $2.10–$4.95 per item for 200 or more (typically $3.50); minimum site charge $89–$250.
How much does test and tag cost per item in Brisbane?
A small job of 1 to 50 items costs $3.50–$9.50 per item in Brisbane, with $5.50 typical, and the rate steps down to $3.20–$6 for 51 to 200 items and $2.10–$4.95 for 200 or more. A South Bank or Queen Street Mall floor adds an after-hours window and a dock booking to the visit; a single shop on Oxford Street Bulimba needs neither, and a business spread across Milton, Newstead and Upper Mount Gravatt pays a minimum at each site.
What is the minimum charge for test and tag in Brisbane?
Going by our Brisbane table, the minimum site charge or call-out is $89–$250, typically $125, and it usually covers a stated number of items before the per-item rate applies. Cafes on Given Terrace Paddington, kiosks at South Bank and single shops on Boundary Street West End are the Brisbane buyers who usually land on the minimum, and the quote should say how many items it covers.
How much does RCD testing cost in Brisbane?
A fixed RCD push-button and trip-time test is $5–$20 per unit on our Brisbane table, with $15 typical, and a portable RCD test $5.49–$12 per unit; both are counted separately from the appliances plugged into them.
How often does equipment need to be tested and tagged in Brisbane?
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. For a Brisbane site, have the tester print the retest date on each tag and in the register so an Upper Mount Gravatt school or an Acacia Ridge yard books its next visit from the register, not from memory.
Who is allowed to test and tag in Brisbane?
The Queensland Electrical Safety Regulation 2013 sets the intervals in the regulation itself: for manufacturing work, double-insulated equipment at least once every year and other equipment at least once every 6 months; for service work, equipment used only for office work at least once every 5 years and otherwise at least once every year; for construction work, equipment must comply with AS/NZS 3012; amusement devices at least once every 6 months; safety switches tested by a competent person at the AS/NZS 3760 intervals; and hire equipment inspected and tested by a competent person before each hiring and tested and tagged at least once every 6 months, with records kept for at least 5 years. On our Brisbane table an hourly rate of $60–$150 applies where the item count is unknown or the site is complex, with $90 typical.
What do emergency and exit light tests cost in Brisbane?
Emergency and exit light tests cost $7–$20 per fitting in Brisbane on a six-monthly cycle, with $12 typical, and most testers quote them alongside the appliance visit. Office floors in the CBD, Milton and Newstead and tenancies at Westfield Chermside and Garden City are the usual Brisbane jobs; ask for the fittings counted on the quote and the discharge test shown as its own line.
Does test and tag cover microwaves, three-phase equipment and fire extinguishers in Brisbane?
A microwave leakage test is $5–$30 per unit, three-phase equipment $4–$9.50 per item and a fire extinguisher or fire blanket inspection bundled with the visit $10–$35 per unit on our Brisbane table. Fortitude Valley, South Bank and Howard Smith Wharves kitchens buy the microwave line in Brisbane, and Eagle Farm, Yatala and Richlands sheds the three-phase line; ask whether the extinguisher inspection is on the same visit or quoted by a separate fire contractor.
What does a failed item cost to fix during a Brisbane test and tag visit?
A plug top replaced on site costs $15–$55 per item on our Brisbane table, with $25 typical, and an extension lead or power board test $2–$8 per item. AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, was published on 29 June 2022 as a complete revision superseding AS/NZS 3760:2010, and Standards Australia describes its interval recommendations as based on equipment type, environment and usage; AS/NZS 2293.2:2019 is the routine service and maintenance part of the emergency lighting and exit sign standard. On a Brisbane quote, ask for failed items to appear in the register with the plug top at $15–$55 per item on its own line, so the repair and the retest can be reconciled after the visit.