How much does fencing cost in Adelaide?
Adelaide fencing is quoted by the metre, and the two everyday choices share one price band here: Colorbond at $74–$175 and treated pine palings at $74–$175, supplied and installed. A whole boundary fence of average length comes to $3,675–$8,300, and South Australian law expects the neighbour to pay half. If all you want is the cheapest fence that does the job, chain-link or wire is $28–$83 and PVC $46–$140. Taking out the old fence, gates and any pool barrier are separate lines, covered below.
Comparing cities, or after the Australia-wide picture? See the national guide: Fencing cost per metre in Australia.
Detailed Pricing — Fencing Cost in Adelaide 2026
| Service | Low | Typical | High |
|---|---|---|---|
| Colorbond fence (per m) | $74/m | $120 | $175 |
| Timber paling fence (per m) | $74/m | $100 | $175 |
| Hardwood paling fence, 1.8 m (per m) | $92/m | $120 | $175 |
| Pool fencing — glass (per m) | $275/m | $460 | $735 |
| Pool fencing — aluminium (per m) | $92/m | $185 | $320 |
| Aluminium slat fence | $155/m | $250 | $370 |
| Picket fence (per m) | $55/m | $83 | $230 |
| PVC / vinyl fence, picket to privacy (per m) | $46/m | $87 | $140 |
| Brick or block boundary fence, rendered (about 1.8 m, per m) | $320/m | $535 | $735 |
| Chain-link / wire fence (per m) | $28/m | $51 | $83 |
| Retaining wall (timber, per m) | $140/m | $260 | $415 |
| Fence gate — single | $230installed | $460 | $735 |
| Fence gate — double / driveway (Colorbond or timber, manual) | $735installed | $1,100 | $2,300 |
| Old fence removal (per m) | $14/m | $28 | $46 |
| Old fence removal — timber paling, incl. disposal (per m) | $14/m | $23 | $41 |
| Fence repair, palings or sheets and rails (per m) | $55/m | $92 | $140 |
| Full boundary fence (avg 40 m) | $3,675total | $5,500 | $8,300 |
| Post replacement (per post) | $130per post | $210 | $275 |
| Colorbond fence 2.1 m (per m) | $110/m | $145 | $230 |
You're in.
A local installer will be in touch about your job. No spam, no call centre.
Getting quotes for fencing work in Adelaide? Get a quote from a local tradie — free, no obligation.
Get Adelaide quotes →Prices include GST. Based on Adelaide metro area, November 2026. Outer suburbs may vary.
Colorbond fence cost per metre in Adelaide (2026)
Adelaide prices a Colorbond boundary off two rows: $74–$175 a metre for the standard 1.8 m panel and $110–$230 a metre for the taller 2.1 m sheet. Everything else on a quote is a row of its own, so the clearest way to read these figures is to build one job line by line, as below for a block in Norwood.
| Job | Low | Typical | High |
|---|---|---|---|
| Colorbond fence (per m) | $74/m | $120 | $175 |
| Timber paling fence (per m) | $74/m | $100 | $175 |
| Old fence removal (per m) | $14/m | $28 | $46 |
| Fence gate — single (installed) | $230 | $460 | $735 |
Say the Norwood block needs 32 m of new boundary. On the standard row that fence is $2,368–$5,600 at $74–$175 a metre. Pulling out the old fence is a separate row at $14–$46 a metre, so 32 m adds $448–$1,472, and one pedestrian gate adds $230–$735 installed. The three lines together come to $3,046–$7,807.
Ground and access shape where an Adelaide quote lands within those rows. Heavy clay or rock under the fence line costs more to dig than sandy soil, so ask how deep the footings are set and whether the concrete is in the metre rate. Short runs beside townhouses leave narrow gaps where post holes are dug by hand, and because set-up and travel are spread over fewer metres, a short run is priced toward the $175 end.
- The 2.1 m row begins at $110 a metre, so a quote for the taller sheet should name that height.
- Ask for the old fence, the gate and the panel height to be listed as separate lines on the quote.
- Dry summer months suit digging in Adelaide, so ask which weeks the footings are booked.
What Affects Fencing Costs in Adelaide
From cheapest to dearest
Plenty of locals search for cheap fencing. Chain-link or wire is the lowest-cost option at $28–$83, then PVC at $46–$140 and a picket front at $55–$230. Pine palings typically come in at $100 a metre, below the typical Colorbond price of $120. Hardwood palings ($92–$175) and aluminium slats ($155–$370) are the step up.
Splitting the cost with next door
South Australia's Fences Act 1975 works on the presumption that both owners gain equally from a dividing fence, so both pay half. On a typical $5,500 boundary job, your half is about $2,750. Failing agreement, the formal route is a notice of intention; after 30 days without a cross notice in reply, or if talks still stall, either owner may apply to the Magistrates Court for an order.
Height limits and council approval
In South Australia, brick or masonry fences over 1 m high, and other fences over 2.1 m, generally need development approval from the local council; post and wire fences are the exception. Colorbond at 2.1 m ($110–$230) sits right on that line. A rendered brick or block wall of about 1.8 m ($320–$735) is well past the masonry limit, so allow time for approval.
Townhouse rows and short runs
Semi-detached, row and townhouse dwellings make up 16.3% of Greater Adelaide homes, compared with 12.6% Australia-wide (ABS 2021 Census). Subdivided blocks like these mean short fence runs, shared side paths and narrow gaps between buildings where post holes are often dug by hand. A short run still carries the same set-up and travel as a long one, which nudges its per-metre price nearer the upper end.
Removing or repairing the old fence
Pulling out an existing fence costs $14–$46; an old pine paling fence, tip fees and all, is $14–$41. When just one stretch has given way, fixing it (palings, sheets or rails) costs $55–$140, and a single rotten or leaning post can be replaced for $130–$275 rather than rebuilding the whole line.
Pool safety barriers
South Australian law requires an unbroken safety barrier around every pool, and no water may go in until that barrier complies; council must also be told once an approved barrier is complete. New barriers are built to AS 1926.1, the Australian Standard referenced by the National Construction Code, with some state variations. Glass panels cost $275–$735 a metre, aluminium $92–$320.
Dry summers for digging
Adelaide's West Terrace station records just 20.1 mm of rain in an average January and 20.2 mm in February, while June, the wettest month, averages 72.1 mm (BOM averages). Summer is the easy window for digging holes and setting posts in concrete, while a wet June can stall the job and churn up the yard. Gates are priced per gate: a single walk-through gate costs $230–$735, a hand-opened driveway pair $735–$2,300.
How to Save Money on Fencing Cost in Adelaide
The Cheapest Fencing in Adelaide, Ranked by Cost per Metre
Ranked by installed price per metre in Adelaide, chain-link or wire is cheapest at $28–$83 (typical $51). Colorbond and timber paling follow at the same $74–$175 (typical $100), then picket at $55–$230. Pool fencing sits well above those ($92–$320 aluminium, $275–$735 glass). The cheapest fence to build is not always the cheapest to own in Adelaide. Long, dry summers are hard on timber, so paling that goes unpainted greys and splits sooner, while Colorbond needs no finish at all. Chain-link suits back boundaries, larger blocks and dog runs rather than privacy. Two costs sit outside the per-metre rate for every type: removing the old fence ($14–$46 per metre) and gates ($230–$735 single, $735–$2,300 double). Compare quotes on the total, not the metre rate alone.
Good Neighbour Colorbond Fencing Cost in Adelaide, and Who Pays
A "good neighbour" fence is a Colorbond boundary fence with the same finished face on both sides. In Adelaide it costs $74–$175 per metre installed (typical $120). A full boundary of about 40 metres costs $3,675–$8,300 (typical $5,500), plus $14–$46 per metre if an old fence has to come out first. South Australia's Fences Act sets out how that cost is shared with the neighbour. The usual starting point is an even split of an adequate fence, agreed in writing before work starts. Anything above that standard, such as extra height, lattice or a colour the other side didn't choose, is usually paid by whoever wants it. Get one written quote that both households can read.
Fence Repair vs Replacement Cost in Adelaide
Before replacing an Adelaide fence, price the repair. A leaning run is usually a post problem, and a replacement post costs $130–$275 each (typical $210). On timber fences the usual cause is termite or rot damage at ground level. On Colorbond it is usually a footing that has moved in Adelaide's reactive clay, which swells and shrinks with the seasons. When the posts are failing along the whole run, or the palings are splitting, replacement starts to make sense: removal at $14–$46 per metre, then the new fence at $74–$175 per metre for Colorbond or $74–$175 for timber paling. Ask whether the new posts will be set deeper or in larger footings than the ones that failed.
Fencing cost per metre in Adelaide: timber paling fences
Adelaide searches for a timber fence price per metre find a Colorbond section above but no timber one, so here it is: the Adelaide timber rows per metre installed, with the hardwood grade, the removal of the old fence and the posts priced on their own lines.
Timber fence cost per metre in Adelaide
Timber fence cost per metre in Adelaide is $74–$175 for a standard paling fence, typically $100 a metre, and $92–$175 a metre for hardwood palings at 1.8 metres. A Norwood or Unley side boundary of 25 metres comes to $1,850–$4,375 on the standard row before gates or removal.
Where the old fence is timber too, its removal with disposal is $14–$41 a metre, and a single gate in the new run $230–$735 installed. For a Glenelg fence that is sound apart from a few posts, $130–$275 a post and $55–$140 a metre of repair are the rows to price before a full replacement.
How Fencing Costs Vary Across Adelaide
This page prices fencing for the whole Adelaide area from one table. A Colorbond run is $74–$175 a metre and timber paling $74–$175 a metre whether the job is in Salisbury, Tea Tree Gully, Marion, Glenelg or up at Stirling and Mount Barker; the suburb does not move the rate, while the length of the run, the material and what has to come out first do.
Separate houses are 75.0% of dwellings in Greater Adelaide at the 2021 Census, against 78.0% across South Australia, and semi-detached homes 16.3%. For a house block the table prices a full boundary at $3,675–$8,300 for an average 40 m run; a townhouse fence is a shorter run, so check the gate and removal lines as closely as the metre rate.
Housing figures: Australian Bureau of Statistics, 2021 Census QuickStats, Greater Adelaide.
Fencing Cost in Adelaide: What the Quote Should Include
An itemised fencing quote can be read line by line against the rows on this page, so offers for a back fence in Marion or a side boundary in Tea Tree Gully compare on the same scope rather than on a headline figure.
- The fence type and the finished height, matched to a row: Colorbond at $74–$175 a metre, 2.1 m Colorbond at $110–$230 a metre, or hardwood paling at $92–$175 a metre.
- The length of the run in metres and the total, so a typical 40 m boundary can be checked against $3,675–$8,300.
- Taking away the old fence as its own line, at $14–$41 a metre for timber paling with disposal.
- Every gate listed on its own: a single gate at $230–$735 and a double or driveway gate at $735–$2,300.
- How many posts go in and how deep the footings are; on a repair, each replacement post is $130–$275.
- Who serves the notice of intention and how the cost is split where the fence divides two properties, since the Fences Act 1975 generally expects neighbours to contribute equally.
- Whether the fence needs development approval from the local council: in South Australia that generally applies to a fence over 2.1 metres, or a brick or masonry fence over 1 metre.
- The total including GST, the deposit and when the balance is due.
Fence rules: Law Handbook, dividing fences; Law Handbook, fences and council approval.
Frequently Asked Questions — Fencing Cost in Adelaide
Our Methodology
These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed November 2026. Read our full methodology →