Independent Australian Cost Guides
Updated November 2026
← All commercial trades

How much do commercial garage doors cost in Sunshine Coast?

Commercial garage doors run $2,900–$25,500
installed, depending on door type, size and automation
On the Sunshine Coast, $2,900 is the entry price for an installed industrial roller shutter and a rapid-roll door runs $11,200–$25,500, supply and install. A Yandina shed with a manual roller door near 3m x 3m is $2,050–$3,675 installed.
+5.2% Commercial garage door prices are up around 5.2% over the past year, re-verified against 90+ sources in November 2026. Year on year
Typical Industrial Roller Shutter
$4,600
per commercial roller door, installed
Roller Shutter
$2,900–$12,250
Insulated
$280–$380/m²
Sectional
$3,500–$20,200
Roller $2,900Sectional $9,900High-speed $25,500

On the Sunshine Coast, installed commercial garage doors range from $2,900–$25,500. The door type sets the bracket, from an industrial roller shutter to a high-speed rapid-roll door, and the opening size and motor decide the rest: a motorised 4m x 4m roller door comes to $4,700–$7,650 installed.

Commercial door work here is spread between the industrial estates at Kunda Park, Kawana, Caloundra West and Noosaville, storage and marine businesses near the river mouths, and rear service doors on shops and restaurants along the beachfront strips. Coastal sites call for coated curtains and stainless fixings, while estate sheds further inland are more about size and use.

An annual service costs $155–$355 a year per door and a new motor $765–$2,550 per door. Roller door and shutter figures include GST; sectional, insulated-panel and rapid-roll figures are ex GST.

Comparing cities, or after the Australia-wide picture? See the national guide: How much do commercial garage doors cost in Australia?

Quick answerA commercial garage door costs $2,900–$25,500 installed depending on type — roller shutters at the low end, high-speed rapid-roll doors at the top. Get free commercial quotes →

Commercial Garage Door Prices in Sunshine Coast 2026: Cost Table and Price List

ServiceLowTypicalHigh
Industrial roller shutter (per door, installed)$2,900installed$4,600$12,250
Insulated commercial door (PU-core sectional, supply only, per sqm of door, ex GST)$280/sqm$330$380
Commercial sectional overhead door (installed, ex GST)$3,500installed$9,900$20,200
High-speed / rapid-roll door (supply + install, ex GST)$11,200supply+install$15,300$25,500
Roller door ~3m x 3m, manual (installed)$2,050installed$2,700$3,675
Roller door ~3m x 3m, motorised (installed)$3,275installed$4,275$5,600
Roller door ~4m x 4m, motorised (installed)$4,700installed$5,800$7,650
Roller door ~5m x 5m, motorised (installed)$6,100installed$7,450$10,200
Door motor / operator replacement$765per door$1,275$2,550
Annual door service (per door)$155per year$255$355
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local installer will be in touch about your job. No spam, no call centre.

Scoping a commercial garage door? Get a quote from an Australian commercial door installer — free, no obligation.

Get commercial quotes →
Prices verified November 2026 · Cross-referenced against Australian commercial garage door suppliers · See methodology

Prices include GST unless the row says ex GST. Sunshine Coast-wide, November 2026. Large or custom openings vary.

Commercial garage door types and what they cost

Industrial roller shutters

$2,900–$12,250 installed

The usual fit for trade units and warehouses at Kunda Park, Yandina and Caloundra West, and for boat and caravan storage sheds. A shutter gives the widest opening for the money, and a coated curtain is worth pricing within a kilometre or so of the surf.

Sectional overhead doors

$3,500–$20,200 installed, ex GST

Good for showrooms and fitted-out workshops at Kawana and Noosaville, where a glazed panel door looks better from the street and runs more quietly than a shutter next to offices.

Rapid-roll doors

$11,200–$25,500 supply and install, ex GST

Earns its place in food production, cold storage and freight handling, where a door opens many times an hour and chilled stock or air-conditioning is at stake.

Insulated sectional doors

$280–$380 per m² of door, supply only, ex GST

Worth the extra where a door closes off a cool room, an air-conditioned workshop or a west-facing unit that bakes through summer afternoons, since the PU core slows heat getting through the door.

Pedestrian access doors

quoted per door

A separate pass door lets staff and customers in without opening the main door, which keeps heat out and saves wear on the motor in a busy unit. Price it alongside the main door so frames and finishes match.

Commercial vs residential garage doors — why commercial costs more

A house door on the Sunshine Coast closes a garage and moves a few times a day. A door on a Kunda Park warehouse, a marine business at Mooloolaba or a storage complex opens for forklifts, boats and trucks, usually across a wider and taller opening. It needs thicker steel or heavier panels, springs and bearings rated for far more cycles, a commercial operator, photo-eye or safety-edge protection, and fixings designed for the wind load on that face of the building. Those parts, and a crew equipped to lift them into place, account for the price.

Commercial garage door sizes and how size drives price

Opening size decides most of a Sunshine Coast roller door price. Motorised, a door of about 3m x 3m comes to $3,275–$5,600 installed; step up to about 4m x 4m and it is $4,700–$7,650, or to about 5m x 5m and it is $6,100–$10,200. Manual operation on the smallest size cuts it to $2,050–$3,675. Each step up adds curtain area, a larger drum and a stronger motor, and a tall door for a boat or caravan bay may need a platform to install. Beyond about 5m, quotes shift to industrial shutters or sectionals.

What Actually Moves the Commercial Garage Door Cost in Sunshine Coast

How to Keep the Commercial Garage Door Cost Sane in Sunshine Coast

1
On a 3m bay that opens once or twice a day, a manual door (typically $2,700) in place of a motorised one (typically $4,275) saves about $1,575.
2
Match the coating to the site: a unit a few hundred metres from the beach warrants a coastal-grade finish; an inland estate at Yandina may not need one.
3
Book servicing, $155–$355 a year per door, before the summer storm season, when installers have more room in the diary.
4
When only the motor has failed, compare a replacement operator at $765–$2,550 per door with the cost of a whole new door before deciding.
5
Keep tracks, guides and the floor seal clear of sand and leaf litter; grit in the guides wears rollers and strains the motor.

Commercial garage door cost by door type

Quick answerSunshine Coast businesses pay $2,900–$12,250 installed for an industrial roller shutter and $3,500–$20,200 installed ex GST for a commercial sectional overhead door, while a rapid-roll door is $11,200–$25,500 supplied and installed ex GST.

Roller shutters are the usual choice on Sunshine Coast trade and storage units, because steel curtains are quick to fit, simple to repair and leave a clear opening. Sectionals cost more for their panels, tracks and torsion springs, and are chosen where a showroom face, glazing or insulation matters. Rapid-roll doors are a specialist buy for food, cold-chain and logistics sites. Insulated sectionals are priced by the square metre of door, supply only. Wind locks, coated finishes and the motor then move each job within its band.

Our Methodology

Commercial pricing on this page is compiled from Australian commercial and industrial garage-door suppliers and installers, published supplier price guides and product ranges as of November 2026. We cross-reference ranges from multiple sources; no contractor can influence a published figure. All prices are estimates, GST-inclusive unless a row says ex GST, and will vary with your specific opening, door spec and site. Always get multiple written quotes. Last reviewed November 2026. Read our full methodology →

Commercial garage door prices, product by product

An industrial roller shutter on the Sunshine Coast costs $2,900–$12,250 installed, with a typical job at $4,600. Near the low end sits a single-phase door on a modest trade unit; near the high end, a wide warehouse or boat-shed opening with a three-phase operator, wind locks and a coastal-grade curtain. Ask each installer to name the curtain gauge and coating so the quotes compare like for like.

Commercial sectional overhead doors cost $3,500–$20,200 installed, ex GST, typically $9,900 ex GST. The lower figure buys a plain steel panel door for a single bay; the higher one a wide, glazed or aluminium-framed door with a heavy-duty operator. Sectionals lift into the roof space on tracks, so headroom shapes the price as much as width.

An insulated PU-core sectional door costs $280–$380 per square metre of door, supply only and ex GST. A door 4m wide and 3m high is 12 square metres, about $3,360–$4,560 supplied, before installation. Insulation earns its cost on chilled storage and air-conditioned workshops; on an open storage shed it adds little.

High-speed and rapid-roll doors cost $11,200–$25,500 supplied and installed, ex GST. They are made for openings that cycle constantly, such as the link between a dock and a cool room in a food plant or a busy logistics shed. The band reflects the drive, control panel, sensors and fast fabric curtain, and a service agreement is worth costing at the same time.

Commercial garage doors — go deeper

Which door for which job?

Trade units, storage complexes and boat or caravan sheds at Kunda Park, Caloundra West, Yandina and Noosaville: a roller shutter, motorised wherever the door opens more than a few times a day.

Showrooms, gyms and offices with a vehicle bay at Kawana, Maroochydore or Noosa: a sectional door with glazing or insulated panels and a quiet belt-drive operator.

Food producers and logistics businesses moving chilled stock: a rapid-roll door on the busy internal opening, with a shutter or insulated sectional on the outside wall.

Red flags when comparing commercial door installers

Roller door sizes and prices on the Sunshine Coast

On the Sunshine Coast, the roller door row follows what is parked behind it. A trade van at a Kunda Park or Noosaville unit fits through 3m x 3m, priced at $2,050–$3,675 installed for a manual door and $3,275–$5,600 installed for a motorised one. A caravan or boat bay wants about 4m x 4m at $4,700–$7,650 installed, and a rigid truck or tall boat about 5m x 5m at $6,100–$10,200 installed.

A storage or caravan complex with a row of bays multiplies the per-door price: five motorised 4m x 4m doors come to $23,500–$38,250 installed at $4,700–$7,650 each. Smaller 3m bays that open a few times a week can stay manual at $2,050–$3,675 installed per door, and bays with forklift traffic are often quoted as an industrial roller shutter at $2,900–$12,250 installed.

Running costs on the coast are per door. Servicing is $155–$355 a year per door and an operator replacement is $765–$2,550 per door, typically $1,275. Units within sight of the ocean at Mooloolaba or Caloundra are worth keeping on that annual service, since salt spray corrodes springs, tracks and fixings, and hinterland sheds can carry travel time in the quote.

Industrial and commercial garage door cost on the Sunshine Coast by door type and size

An industrial garage door on the Sunshine Coast is priced per door, installed, and the door type sets the band before the size does. An industrial roller shutter costs $2,900–$12,250 per door installed. A commercial sectional overhead door, the panel door that suits a showroom or a workshop where the shutter noise matters, runs $3,500–$20,200 installed ex GST. A high-speed or rapid-roll door for a loading dock or food premises is $11,200–$25,500 supplied and installed ex GST.

For a standard commercial roller door the size and the motor are the price. A roller door around 3m x 3m is $2,050–$3,675 installed as a manual door and $3,275–$5,600 motorised; at around 4m x 4m a motorised door is $4,700–$7,650, and at around 5m x 5m $6,100–$10,200. An insulated PU-core sectional door, supplied only, is priced by the square metre of door at $280–$380 ex GST.

The after-install lines are what a Sunshine Coast business owner pays over the life of the door: a motor or operator replacement at $765–$2,550 per door, and an annual door service at $155–$355 per door, which is the line that keeps a coastal door moving once salt air gets into the guides and springs. A quote should state the door type, the opening size, whether the motor is included and whether the figure is ex or inc GST.

What a Compliant Commercial Garage Door Quote Includes — Cost in Sunshine Coast

Across the Sunshine Coast, from Caloundra workshops to hinterland sheds, a commercial garage door quote should fix the door, the access and the GST basis before the total is read. Ask for the same detail from every installer.

Frequently Asked Questions — Commercial Garage Door Cost in Sunshine Coast

How much does an industrial roller shutter cost on the Sunshine Coast?
An industrial roller shutter (per door, installed) is $2,900–$12,250 in our Sunshine Coast table, typically $4,600.
How much does a commercial garage door cost on the Sunshine Coast?
In our Sunshine Coast table: a motorised roller door about 3 m x 3 m $3,275–$5,600 installed, a commercial sectional overhead door $3,500–$20,200 installed and an industrial roller shutter $2,900–$12,250 installed.
How much does an insulated commercial door cost on the Sunshine Coast?
An insulated PU-core sectional door (supply only) is $280–$380 a square metre in our Sunshine Coast table, typically $330.
What does an industrial door repair cost on the Sunshine Coast?
The largest industrial door repair on the Sunshine Coast is usually the motor or operator, at $765–$2,550 per door, typically $1,275 per door. Broken springs, bent guides and worn bearings are smaller jobs, and an annual service at $155–$355 per year per door helps catch them early. Busy doors in industrial estates such as Kunda Park and Yandina wear these parts faster.
What does a sectional door cost for a Caloundra business?
A commercial sectional overhead door for a Caloundra business on the Sunshine Coast costs $3,500–$20,200 installed, ex GST, typically $9,900 ex GST. Sectionals suit showrooms, gyms and workshops in Caloundra West or Pelican Waters that want glazing, insulation or a quieter door than a roller shutter. Width, panel thickness, windows, a pass door and the operator type move the price.
What do commercial roller doors cost on the Sunshine Coast?
On the Sunshine Coast, a motorised commercial roller door around 3m x 3m costs $3,275–$5,600 installed, typically $4,275 installed, and a manual door of that size is $2,050–$3,675 installed. Larger openings around 5m x 5m cost $6,100–$10,200 installed. Units near the beach at Mooloolaba or Coolum are worth pricing with a coastal-grade curtain finish and stainless fixings.
What does a high-speed door cost for a Sunshine Coast cold store or food plant?
On the Sunshine Coast a high-speed rapid-roll door is $11,200–$25,500 supply and install, ex GST, and $15,300 is typical. Food processors around Yandina, seafood and produce distributors at Kunda Park and Warana, and cold stores use them on internal doorways where forklifts pass all day and humid air has to stay out. The opening size, curtain speed, vision strip and trigger, whether radar, loop or pull cord, decide where a quote sits; stainless frames for a wash-down area add to the price.
How much is a 4m x 4m motorised roller door for a Noosa business on the Sunshine Coast?
A motorised roller door around 4m by 4m on the Sunshine Coast costs $4,700–$7,650 installed, typically $5,800. Boat and trailer businesses at Noosaville, Coolum workshops and Maroochydore trade units take this size for vans and light trucks. Humid, salty air along the coast shortens the life of plain finishes, so ask whether the curtain, guides and fixings are coastal-rated. The installed figure covers the door, drum, operator and safety beams on a sound existing opening; a new lintel or power run is extra.
How are commercial door prices quoted on the Sunshine Coast?
Sunshine Coast quotes use three bases. Roller doors and shutters are priced per door installed, such as $3,275–$5,600 for a motorised door around 3m by 3m. Insulated PU-core panels are priced by area at $280–$380 per square metre of door, on a supply-only, ex GST basis, so a bigger opening means more panel to pay for before fitting. Rapid-roll doors are quoted supply and install, ex GST, at $11,200–$25,500. Line every quote up on the same basis and add GST where it is missing before comparing totals.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage