How much do commercial garage doors cost in Gold Coast?
On the Gold Coast, commercial garage doors run $2,900–$25,500 installed, with the door type setting the band and the opening size doing most of the rest. A manual roller door for a 3m x 3m opening is $2,050–$3,675 installed, sectional overhead doors span $3,500–$20,200, and a high-speed rapid-roll door sits at the highest figure.
The city's industrial land runs along the M1 corridor, from Yatala and Stapylton in the north through Coomera and Helensvale to Molendinar, Nerang and Burleigh, with marine businesses around Coomera and the Broadwater needing tall openings for boats. Near the beach, salt works on steel curtains and fixings, so coated finishes and a yearly service count for more on coastal sites.
That service runs $155–$355 a year for each door, and a new motor or operator $765–$2,550 per door. Roller doors and shutters are priced including GST; sectional, insulated and rapid-roll doors are priced ex GST, as marked.
Comparing cities, or after the Australia-wide picture? See the national guide: How much do commercial garage doors cost in Australia?
Commercial Garage Door Prices in Gold Coast 2026: Cost Table and Price List
| Service | Low | Typical | High |
|---|---|---|---|
| Industrial roller shutter (per door, installed) | $2,900installed | $4,600 | $12,250 |
| Insulated commercial door (PU-core sectional, supply only, per sqm of door, ex GST) | $280/sqm | $330 | $380 |
| Commercial sectional overhead door (installed, ex GST) | $3,500installed | $9,900 | $20,200 |
| High-speed / rapid-roll door (supply + install, ex GST) | $11,200supply+install | $15,300 | $25,500 |
| Roller door ~3m x 3m, manual (installed) | $2,050installed | $2,700 | $3,675 |
| Roller door ~3m x 3m, motorised (installed) | $3,275installed | $4,275 | $5,600 |
| Roller door ~4m x 4m, motorised (installed) | $4,700installed | $5,800 | $7,650 |
| Roller door ~5m x 5m, motorised (installed) | $6,100installed | $7,450 | $10,200 |
| Door motor / operator replacement | $765per door | $1,275 | $2,550 |
| Annual door service (per door) | $155per year | $255 | $355 |
You're in.
A local installer will be in touch about your job. No spam, no call centre.
Scoping a commercial garage door? Get a quote from an Australian commercial door installer — free, no obligation.
Get commercial quotes →Prices include GST unless the row says ex GST. Gold Coast-wide, November 2026. Large or custom openings vary.
Commercial roller doors and other commercial garage door prices on the Gold Coast
Commercial roller doors on the Gold Coast and garage roller shutters cover most of what gets fitted on the Yatala, Molendinar and Burleigh Heads estates, but the sectional, rapid-roll and insulated doors each have their own price band.
- Roller doors by size: a manual 3 m x 3 m door is $2,050–$3,675 installed; adding a motor takes it to $3,275–$5,600 installed; a 4 m x 4 m motorised door is $4,700–$7,650 installed; and a 5 m x 5 m door for a truck bay at Stapylton is $6,100–$10,200 installed.
- Garage roller shutters for industry: $2,900–$12,250 installed. Boat builders and marine trimmers on the Coomera waterfront pay for marine-grade coatings and wide curtains, which is where the upper figures come in.
- Sectional overhead doors: $3,500–$20,200 installed, ex GST, for a Nerang gym or a Bundall car showroom that wants glazing and a quiet lift.
- Rapid-roll doors: $11,200–$25,500 supply and install, ex GST, on cold-room openings at the Arundel and Currumbin food suppliers.
- Insulated door panels: $280–$380 per m² of door, supply only, ex GST, with installation quoted as a separate line.
- Keeping them going: $765–$2,550 per door to replace an operator, $155–$355 a year for each door on a service round.
Use the form on this page to get quotes from commercial garage door installers on the Gold Coast.
Commercial vs residential garage doors — why commercial costs more
A Gold Coast commercial door faces more work and more weather than a house door. A boatyard around Coomera may need a tall opening for masts and hulls, a West Burleigh warehouse may cycle all day, and a basement car park under a Surfers Paradise tower sees residents and visitors around the clock. That calls for heavier curtains, larger springs, duty-rated operators, corrosion-resistant hardware and vehicle loops, plus installation outside trading hours, all of which push the price well beyond a house door.
Commercial garage door sizes and how size drives price
On the Gold Coast, roller door prices rise in clear steps with the opening. About 3m x 3m costs $2,050–$3,675 installed as a manual door or $3,275–$5,600 with a motor, a good fit for a trade van bay in Ashmore. Around 4m x 4m, a motorised door is $4,700–$7,650. About 5m x 5m, enough for a rigid truck or a trailered boat in Arundel, runs $6,100–$10,200. Anything larger gets priced as an industrial shutter.
What Actually Moves the Commercial Garage Door Cost in Gold Coast
- Wind rating. Ask what wind rating the door is designed for. Summer storms bring strong gusts, and wind locks that hold the curtain edges in the guides add to the price on wide doors.
- Salt and corrosion. Sites near the beach or the Broadwater need coated curtains, stainless or galvanised fixings and sealed bearings, which cost more but resist salt attack.
- Opening height. Marine and machinery businesses often need tall doors for boats, cranes or plant, and extra height means more curtain, a bigger barrel and a stronger drive.
- Power supply. A heavy shutter wants a three-phase operator, and if the building lacks three-phase power, running it in is an electrician's cost on top.
- High-rise access. Basement car park doors under towers in Broadbeach and Surfers Paradise often need night work, traffic control at the ramp and coordination with building management.
How to Keep the Commercial Garage Door Cost Sane in Gold Coast
Commercial garage door cost by door type
Match the door to the opening's job. Shutters are the secure, low-cost answer for sheds and yards on the M1 estates and suit plain industrial bays well. Sectional doors cost more for rigid panels, tracks and springs, and pay that back with a better seal against heat and rain and a finished face for showrooms. Rapid-roll doors cost the most and only suit openings busy all day, such as a cool-room entry. Sectional and rapid-roll figures here exclude GST; shutter figures include it.
Our Methodology
Commercial pricing on this page is compiled from Australian commercial and industrial garage-door suppliers and installers, published supplier price guides and product ranges as of November 2026. We cross-reference ranges from multiple sources; no contractor can influence a published figure. All prices are estimates, GST-inclusive unless a row says ex GST, and will vary with your specific opening, door spec and site. Always get multiple written quotes. Last reviewed November 2026. Read our full methodology →
Commercial garage door prices, product by product
Industrial roller shutters cost $2,900–$12,250 per door installed, typically $4,600. A roll-formed steel curtain winds onto a barrel and runs in guides. Wider spans, heavier gauges, wind locks and a three-phase drive lift the price, and a ventilated or perforated curtain adds more again.
Commercial sectional overhead doors cost $3,500–$20,200 installed, ex GST, typically $9,900. Panels hinge and lift on tracks into the ceiling space. Full-view aluminium and glass for a showroom or gym, insulated steel for an air-conditioned workshop, windows and a pass door each move the figure.
An insulated PU-core sectional door costs $280–$380 per m² of door, ex GST and supply only, with $330 per m² typical. A door 3.6m wide and 3m high is 10.8 m², about $3,564 ex GST to supply at the typical rate; installation is quoted on top. Thicker cores and better seals sit higher.
Rapid-roll doors cost $11,200–$25,500 supplied and installed, ex GST. The figure buys a fabric curtain that cycles in seconds, a fast drive and controller, and sensors that open the door for forklifts. Internal doors cost less than exterior ones, which need curtains able to resist wind pressure both ways.
Commercial garage doors — go deeper





Which door for which job?
A warehouse, builders' yard or freight depot in Yatala, Stapylton or Carrara: an industrial roller shutter, motorised and fitted with wind locks, sized for the biggest truck that backs in.
A showroom, gym or trade counter in Southport, Bundall or Robina: a sectional door with glazing, insulated where the space is air-conditioned, for a finished look and a tighter seal.
A boatyard around Coomera or Hope Island: a tall industrial shutter sized for masts and trailers. For a food business or cool store, a rapid-roll door inside and an insulated sectional on the dock.
Red flags when comparing commercial door installers
- No wind rating given for a wide door, and no clear answer when asked what wind load it was designed for.
- Uncoated or low-grade hardware quoted for a site close to the beach or the Broadwater.
- An operator with no duty rating for a basement car park door that residents use around the clock.
- Sectional and rapid-roll prices shown without stating they are ex GST.
- No allowance for night work on a tower car park door, only for an after-hours surcharge to appear on the final invoice.
Roller door sizes and prices on the Gold Coast
Gold Coast roller door jobs run from a trade unit in Molendinar or Nerang to a tall boat shed near Coomera, and the opening size picks the row. A 3m x 3m door is $2,050–$3,675 installed as a manual door, or $3,275–$5,600 installed with a motor. Around 4m x 4m it is $4,700–$7,650 installed, and around 5m x 5m, for a boat on a trailer or a rigid truck, it is $6,100–$10,200 installed.
Salt air is the local cost lever. A door within reach of the beach or the Broadwater is commonly quoted with a coated curtain and stainless hardware, which moves the figure up inside its row, while a sheltered unit further inland can sit near the low end. A workshop bay that takes forklifts and knocks all day is generally priced as an industrial roller shutter, $2,900–$12,250 installed.
Basement car park doors under apartment towers in Southport and Broadbeach cycle many times a day, so running costs count. Servicing is $155–$355 a year per door, so two ramp doors come to $310–$710 a year. A tired operator on a busy ramp is replaced at $765–$2,550 per door, and night work to keep residents moving can lift the labour line.
Commercial garage door cost on the Gold Coast: roller doors, shutters and sizes
Commercial garage doors on the Gold Coast range from $2,050–$3,675 installed for a manual roller door around 3m x 3m to $11,200–$25,500 supplied and installed, ex GST, for a high-speed rapid-roll door. In between, a motorised 4m x 4m roller door costs $4,700–$7,650 installed, an industrial roller shutter $2,900–$12,250 installed, and a commercial sectional overhead door $3,500–$20,200 installed ex GST.
Size is the biggest lever. Storage units and trade sheds in Molendinar, Arundel, Nerang and Yatala often use openings three to four metres wide, while warehouses and boat and caravan storage need 5m x 5m or larger, where a motorised roller door costs $6,100–$10,200 installed. Summer storms bring strong gusts that strain curtains and guides, and salt air in Southport, Burleigh Heads and Palm Beach corrodes fittings, so coatings and wind locks are worth pricing in.
Motors are the most common repair, at $765–$2,550 per door, and an annual service costs $155–$355 a year per door. A good Gold Coast commercial door quote should give the clear opening size and the door's overall size, whether it is a roller door, shutter or sectional, the curtain or panel finish for coastal sites, the motor and safety beam setup, wind locks if fitted, and removal of the old door.
What a Compliant Commercial Garage Door Quote Includes — Cost in Gold Coast
Gold Coast commercial garage door quotes range from a beachside shopfront shutter to a boatshed door at Coomera, so each quote has to name the door, the salt and storm spec, and the basis of every price before totals are compared.
- Number of doors and the measured opening for each, with the door type, curtain gauge and operator duty cycle written down.
- Salt protection stated for sites near Burleigh Heads and Palm Beach: curtain coating, guide finish and fastener grade, and whether that is extra.
- Wind locks and guide upgrades for wide doors ahead of the storm season, shown in the base price or as a priced option.
- Each line marked installed or supply only and ex GST or inclusive, with a manual 3m x 3m roller door at $2,050–$3,675 installed as the comparison line.
- Access and hire: scissor lift or boom lift, working height and any loading dock booking at a Robina or Southport retail site.
- Old door removal, disposal, electrical work and make-good listed as included or extra, with no unpriced items.
- Who commissions the operator, hands over remotes and signs the door off, and the warranty on curtain, springs and motor.
Industrial roller door costs for Gold Coast commercial garage doors
Industrial roller doors on the Gold Coast go onto a particular kind of building: the steel-framed sheds of the Yatala Enterprise Area, the freight and recycling yards at Stapylton, and the fabrication bays along the rail line at Ormeau. The door is wider and heavier than a shopfront roller door, and it gets hit by forklifts. An industrial roller shutter is $2,900–$12,250 installed, with a typical door at $4,600 installed. The size of the opening sets most of that: a 4 m x 4 m motorised roller door is $4,700–$7,650 installed, and a 5 m x 5 m door that a semi can back into is $6,100–$10,200 installed.
Two things push an industrial quote past the typical figure here. The first is wind: summer storms roll off the hinterland and down the Coomera valley, so installers specify heavier guides and a curtain that stays in its tracks under gust pressure. The second is the three-phase operator with a chain hoist back-up, which most landlords want on a tenanted shed so a motor failure does not shut a business. Budget $765–$2,550 per door when that operator is eventually replaced and $155–$355 a year for each door on a service round.
Use the form on this page to get quotes from industrial roller door installers on the Gold Coast.