Updated November 2026·Independently researched·10 min read
Pallet racking in Byron Bay runs $342.54–$417 per starter bay
supply only, for a starter bay of two frames plus beams, as published by suppliers (GST basis mixed) - add-on bays, fit-outs, inspections and parts below
A craft brewery in the Arts and Industry Estate racking kegs and canned stock buys a starter bay at $342.54–$417 and add-ons at $218–$630 each, supply only, with delivery to the estate on its own line. A South Lismore farm supplies store moving into a new shed of up to about 20 bays has the fit-out quoted at $2,000–$10,000.
+4.4%Pallet Racking costs in Byron Bay are up around 4.4% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical starter bay price in Byron Bay, supply only
$350
per bay of two frames plus beams, Byron Bay 2026, as published
Selective pallet racking starter bay (2 frames plus beams), supply only
$342.54-$417
Selective pallet racking add-on bay (1 frame plus beams), supply only
$218-$630
Small-to-medium warehouse racking fit-out (up to about 20 bays)
$2,000-$10,000
$342.54$350$417
Around Byron Bay and the Northern Rivers, racking is priced as supply-only bays, a small fit-out or an inspection. A starter bay of two frames plus beams costs $342.54–$417; each add-on bay of one frame plus beams $218–$630; a small-to-medium warehouse fit-out of up to about 20 bays $2,000–$10,000 per job; and an inspection $250–$695 up to about 1,000 pallet positions or $795–$2,000 beyond.
In an estate unit, the bay build sets the price. Fencing wire, pipe and rural stock at South Lismore go on tall bays with long beams toward $120 each; cartons of apparel and boards at a Ballina unit on low bays with short beams near $27. Upright protectors at $22–$73.70 each, safe working load (SWL) signs at $30.58–$49 each and wire mesh decks at $36.70–$45 each are separate lines, and delivery to the estate is one more.
After the install, an Arts and Industry Estate or Southern Cross estate unit inspects in the small-site band of $250–$695; only a larger Lismore or Ballina distribution shed past 1,000 pallet positions moves to $795–$2,000. Knocked beams are bought as parts at $27–$120 each, supply only, with the fitting quoted by the installer.
Quick answerPallet racking in Byron Bay runs $342.54–$417 per starter bay of two frames plus beams in 2026, supply only, and $218–$630 per add-on bay of one frame plus beams that joins it. A small-to-medium warehouse fit-out of up to about 20 bays runs $2,000–$10,000 per job, and a racking safety inspection $250–$695 for a small site of up to about 1,000 pallet positions or $795–$2,000 for a larger one. Prices are as published by racking suppliers and inspectors; the GST basis is mixed, as each source page states it. Get free Byron Bay quotes →
Pallet Racking Prices in Byron Bay 2026: Cost Table and Price List
Service
Low
Typical
High
Selective pallet racking starter bay (2 frames plus beams), supply only
$342.54per bay
$350
$417
Selective pallet racking add-on bay (1 frame plus beams), supply only
$218per bay
$251
$630
Small-to-medium warehouse racking fit-out (up to about 20 bays)
$2,000per job
$5,000
$10,000
Racking safety inspection, small site (up to about 1,000 pallet positions)
$250per inspection
$495
$695
Racking safety inspection, larger site (over 1,000 pallet positions)
$795per inspection
$1,500
$2,000
Upright protector / column guard, supply only
$22each
$40.82
$73.70
Safe working load (SWL) sign, supply only
$30.58each
$40
$49
New pallet racking beam, supply only (1,372 mm to 3,810 mm)
$27each
$57.42
$120
Wire mesh deck, 838 mm deep, supply only
$36.70each
$39
$45
Scoping pallet racking work in Byron Bay? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by racking suppliers and inspectors; the GST basis is mixed, as each source page states it. Byron Bay and the Northern Rivers, November 2026.
What does a pallet racking bay cost in Byron Bay?$342.54–$417 for a starter bay of two frames plus beams, supply only, $350 typical. Each add-on bay of one frame plus beams joins the run at $218–$630, and a small-to-medium fit-out of up to about 20 bays runs $2,000–$10,000 per job.
What else goes on a Byron Bay pallet racking quote?Racking safety inspections at $250–$695 for a small site or $795–$2,000 for a larger one, upright protectors at $22–$73.70 each, safe working load (SWL) signs at $30.58–$49 each, new beams at $27–$120 each and wire mesh decks at $36.70–$45 each, the parts all supply only.
Worked Pallet Racking Cost Scenarios — Byron Bay
Northern Rivers examples priced from this page's rows: an Arts and Industry Estate brewery store, a Ballina surf and outdoor importer and a South Lismore farm supplies fit-out. Each figure names its row; your own quote prices your bays and delivery.
Arts and Industry Estate brewery store. A craft brewery racking kegs, cans and packaging buys one starter bay at $342.54–$417 ($350 typical) and add-on bays at $218–$630 each, steel column guards at $22–$73.70 each where the forklift turns and SWL signs at $30.58–$49 each, with delivery to the estate shown on its own line.
Ballina surf and outdoor importer. An importer of boards, wetsuits and outdoor gear in Ballina's Southern Cross estate inspects at $250–$695 ($495 typical), puts wire mesh decks at $36.70–$45 each under its cartons, and replaces a knocked beam at $27–$120 each from the original maker.
South Lismore farm supplies fit-out. A rural merchandise store taking a new South Lismore shed has a small-to-medium fit-out of up to about 20 bays priced at $2,000–$10,000 per job ($5,000 typical), with long beams toward $120 each for fencing and pipe and the delivery, assembly and anchoring stated on the quote.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping pallet racking work in Byron Bay? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by racking suppliers and inspectors; the GST basis is mixed, as each source page states it. Byron Bay and the Northern Rivers, November 2026.
Pallet Racking Costs by Sector in Byron Bay
Racking around Byron Bay serves the breweries, food makers and studios of the Arts and Industry Estate, the importers and trade units of Ballina's Southern Cross estate, the rural and building supplies stores of South Lismore, the makers around Bangalow and Mullumbimby, and the stockrooms behind Mercato on Byron and Ballina Fair.
Breweries and food makers: the Arts and Industry Estate - Short runs of a starter bay at $342.54–$417 and add-ons at $218–$630 each, steel guards at $22–$73.70 each and SWL signs at $30.58–$49 each.
Importers and trade units: Ballina's Southern Cross estate - Carton stock on wire mesh decks at $36.70–$45 each and a small-site inspection at $250–$695.
Rural and building supplies: South Lismore - New-shed fit-outs of up to about 20 bays at $2,000–$10,000 per job with long beams toward $120 each, and inspections at $795–$2,000 for the larger sheds.
Makers' units: Bangalow and Mullumbimby - A few bays of stock and packaging, low bays near the bottom of the add-on band and strap-on protectors near the $22 end of the protector band.
Retail stockrooms: Mercato on Byron and Ballina Fair - One short run behind the shop, decks for boxed stock and a delivery booked through the centre dock.
What Byron Bay Pallet Racking Jobs Actually Cost
Northern Rivers racking work runs across three estates. Breweries and food makers in Byron's Arts and Industry Estate buy a starter bay at $342.54–$417 and a few add-ons at $218–$630 each with guards at $22–$73.70 each; importers in Ballina's Southern Cross estate add decks at $36.70–$45 each and inspect at $250–$695.
South Lismore rural and building supplies stores moving into new sheds land in the fit-out band of $2,000–$10,000 per job with long beams toward $120, while makers around Bangalow and Mullumbimby and the stockrooms behind Mercato on Byron buy a short run and SWL signs at $30.58–$49 each.
What Affects Pallet Racking Costs in Byron Bay
Around Byron Bay, delivery to the estate, the bay build and the size of each unit set where a racking quote lands.
Delivery to the estate - The $342.54–$417 starter bay and $218–$630 add-on are supply-only prices; delivery to the Arts and Industry Estate or South Lismore is its own line.
Unit size - Estate units of up to about 1,000 pallet positions inspect at $250–$695; only a larger shed past that size moves to $795–$2,000.
Fencing, pipe and rural stock - Long rural stock at South Lismore needs long beams toward $120 each, against $27 for a short beam.
Kegs and cans - Brewery stock on full pallets fills add-on bays at $218–$630 each and needs guards toward $73.70 each where the forklift turns.
Cartons in Ballina - Boxed apparel and gear sits on wire mesh decks at $36.70–$45 each per level.
Inspector travel from the Gold Coast or Brisbane - An inspector based on the Gold Coast or in Brisbane may price the trip on top of the inspection; ask for it to be shown.
How to Control Pallet Racking Costs in Byron Bay
Around Byron Bay, the levers are sharing trips and buying once: one delivery for bays, parts and signs, one inspector visit for several units, and racking matched to the stock.
Put add-on bays, beams, decks and signs on one order, so an Arts and Industry Estate unit pays for one delivery.
Share an inspector's visit with neighbouring units in the same estate, so the travel is split.
Fit steel column guards at $22–$73.70 each on a brewery's forklift aisle ends before the first knock.
Note the racking maker when a South Lismore or Ballina shed is fitted, so later add-ons and beams match the run.
What a Compliant Pallet Racking Quote Includes — Cost in Byron Bay
Before comparing Byron Bay quotes, check each one prices the same run of starter and add-on bays at the same frame height and beam length, says what a fit-out price covers, sizes an inspection by pallet positions, and lists protectors, signs, beams and decks on their own lines with the GST basis stated.
The starter bay at $342.54–$417, supply only, with the frame height, beam length and number of beam levels stated
Each add-on bay at $218–$630, the number of add-on bays joined to the starter bay, and the same frame and beam size along the run
For a fit-out, the per-job price in the $2,000–$10,000 band, the bay count it covers and whether delivery, assembly and anchoring are inside it
A small-site inspection at $250–$695 or a larger-site inspection at $795–$2,000, with the site's pallet position count stated
What the inspection report includes - photos, risk stickers on damaged parts and a list of the repairs found - and whether those repairs are quoted separately
Upright protectors at $22–$73.70 each, with the type named, from a strap-on cushion to a steel column guard
Safe working load (SWL) signs at $30.58–$49 each, with the count and where each one goes
New beams at $27–$120 each and wire mesh decks at $36.70–$45 each, with the racking maker named so the parts match the system
A single GST basis across every line, delivery shown on its own line, and the supplier's or inspector's ABN and insurance
Pallet racking cost in Byron Bay and the Northern Rivers: estate units, fit-outs and inspections
Pallet racking cost in Byron Bay and the Northern Rivers is $342.54–$417 per starter bay (typically $350) and $218–$630 per add-on bay (typically $251), both supply only, or $2,000–$10,000 per job for a small-to-medium fit-out of up to about 20 bays (typically $5,000). Delivery to the estate is outside the supply-only rows.
Parts and inspection complete the quote: upright protectors at $22–$73.70 each, safe working load (SWL) signs at $30.58–$49 each, new beams at $27–$120 each and wire mesh decks at $36.70–$45 each, with an inspection at $250–$695 for an Arts and Industry Estate or Southern Cross estate unit and $795–$2,000 for a Lismore or Ballina shed past 1,000 pallet positions.
SafeWork SA lists the current steel storage racking standards as AS 4084.1:2023, Steel storage racking: Design, and AS 4084.2:2023, Steel storage racking: Operation and maintenance. SafeWork NSW's pallet racking guide says formal inspections shall be conducted by a competent person, at intervals not exceeding 12 months, and WorkSafe Victoria says a competent person should complete a formal inspection of pallet racking every 12 months. SafeWork NSW says replacement of uprights, bracings, beams, clips or other components should be done using parts from the equipment manufacturer, and that if alternative parts must be used, an engineering report should confirm that they are compatible with the racking being repaired. Ask a Northern Rivers inspector which guidance and standard the report follows, and whether travel from the Gold Coast or Brisbane is in the quoted price.
Pallet racking cost by bay count and site size in Byron Bay
Quick answerAround Byron Bay: a Mercato on Byron stockroom is a starter bay at $342.54–$417 and a few add-ons at $218–$630, a South Lismore store's new shed a fit-out at $2,000–$10,000 per job, and a larger Ballina shed past 1,000 pallet positions an inspection at $795–$2,000.
A Northern Rivers run opens with one starter bay at $342.54–$417 and grows in add-ons at $218–$630 each, so a Ballina importer lengthening a run orders add-ons only. A shed fitted as one job of up to about 20 bays prices toward $2,000 for a short run and toward $10,000 nearer 20 bays.
The inspection steps at about 1,000 pallet positions: $250–$695 below (typically $495), $795–$2,000 above (typically $1,500). The parts are priced each: guards at $22–$73.70, beams at $27–$120, signs at $30.58–$49 and decks at $36.70–$45.
Frequently Asked Questions — Pallet Racking Cost in Byron Bay
What is the price of pallet racking in Byron Bay?
From our Byron Bay table: $342.54–$417 per starter bay, supply only (typically $350); $218–$630 per add-on bay (typically $251); $2,000–$10,000 per job for a small-to-medium fit-out of up to about 20 bays (typically $5,000); and $250–$695 for a small-site racking safety inspection (typically $495).
How much does a pallet racking bay cost in Byron Bay?
A starter bay of two frames plus beams costs $342.54–$417 in Byron Bay, supply only, with $350 typical, and each add-on bay of one frame plus beams that joins it $218–$630, with $251 typical. Frame height, beam length and the number of beam levels move a bay within its band. A South Lismore store with tall bays and long beams for fencing and pipe sits toward the top of each band; a Bangalow maker's unit with low bays of boxed stock sits near the bottom.
What does a small warehouse racking fit-out cost in Byron Bay?
Going by our Byron Bay table, a small-to-medium warehouse racking fit-out of up to about 20 bays is $2,000–$10,000 per job, typically $5,000; a shorter run sits toward the low end and a run nearer 20 bays toward the top. Rural, building and trade businesses moving into new South Lismore or Ballina sheds are the usual Northern Rivers fit-out buyers; ask for the bay count and whether delivery, assembly and anchoring are in the price.
How much does a pallet racking inspection cost in Byron Bay?
A racking safety inspection is $250–$695 for a small site of up to about 1,000 pallet positions on our Byron Bay table, with $495 typical, and $795–$2,000 for a larger site, with $1,500 typical. The price follows the size of the site, and some inspectors include a photo report and risk stickers in it.
How often does pallet racking need to be inspected in Byron Bay?
SafeWork NSW's pallet racking guide says formal inspections shall be conducted by a competent person, at intervals not exceeding 12 months, and WorkSafe Victoria says a competent person should complete a formal inspection of pallet racking every 12 months. SafeWork SA lists the current steel storage racking standards as AS 4084.1:2023, Steel storage racking: Design, and AS 4084.2:2023, Steel storage racking: Operation and maintenance. Around Byron Bay, book one inspector for neighbouring units in the Arts and Industry Estate on the same day, and ask for each damaged part to be tagged on the racking and listed in the report.
Do pallet racking repairs need the manufacturer's parts in Byron Bay?
SafeWork NSW says replacement of uprights, bracings, beams, clips or other components should be done using parts from the equipment manufacturer, and that if alternative parts must be used, an engineering report should confirm that they are compatible with the racking being repaired. On our Byron Bay table a new beam is $27–$120 each, supply only, with $57.42 typical, so ask the supplier to name the racking maker on the quote.
What do upright protectors and load signs cost in Byron Bay?
An upright protector or column guard is $22–$73.70 each on our Byron Bay table, supply only, with $40.82 typical, from a strap-on cushion at the low end to a steel guard at the top, and a safe working load (SWL) sign $30.58–$49 each, with $40 typical. Breweries and rural stores with forklifts buy steel guards toward the top of the band; a Mullumbimby maker's unit worked by a pallet jack may use strap-on cushions near the bottom.
What do replacement beams and mesh decks cost in Byron Bay?
A new pallet racking beam is $27–$120 each, supply only, from a short 1,372 mm beam at the low end to a long 3,810 mm one at the top, with $57.42 typical, and a wire mesh deck 838 mm deep $36.70–$45 each, with $39 typical. Ballina importers with carton stock are the usual Northern Rivers mesh deck buyers; ask for replacement beams from the maker of the racking already standing.
Is installation included in a supply-only pallet racking price in Byron Bay?
No. The starter bay, add-on bay, protector, sign, beam and mesh deck rows on our Byron Bay table are supply only, at $342.54–$417 per starter bay, $218–$630 per add-on bay, $22–$73.70 per protector, $30.58–$49 per sign, $27–$120 per beam and $36.70–$45 per deck; delivery, assembly and anchoring are quoted separately. The fit-out row of $2,000–$10,000 per job is the only whole-job price, and its quote should say what it covers. Around Byron Bay, ask for delivery to the Arts and Industry Estate or South Lismore site, assembly and anchoring on their own lines, so the supply-only parts and the labour can each be compared.