Independent Australian Cost Guides
Updated November 2026
← Backflow Testing across Australia

Cost Guide · Updated November 2026

How much does backflow testing cost in Byron Bay?

Quick answer: the annual backflow test costs $150–$320 for the first device (flat accredited offers around $199 are common), and $90–$145 per additional device on the same visit. GST included — verified November 2026 against 90+ Australian pricing sources. ↑ +4.5% year on year

Backflow testing costs in Byron Bay: what Byron Shire Council's policy says

Byron Shire Council's backflow prevention policy says all testable devices are tested on an annual basis by a Qualified Person. Byron Shire Council's policy defines that person as a licensed plumber who has undertaken accredited backflow training from a registered training organisation.

Under Byron Shire Council's policy, test results must be forwarded to Council within 10 working days of the test. If a test is missed, Byron Shire Council's policy lets Council test and certify the device and charge the customer a fee, issue reminder notices and charge a fee, or disconnect the supply where the hazard is an unacceptable risk. That policy was adopted in 2014 and last reviewed in 2020, so ask Byron Shire Council whether it has been revised since.

Sources: Byron Shire Council.

Backflow testing prices — Byron Bay 2026

ServiceLowTypicalHigh
Annual backflow test (first device)$150per device$199$320
Additional device (same visit)$90per device$120$145
Budget test offers (verify call-out & lodgement included)$80per device$130$180
Double check valve (DCV) install - 20mm$650per device$800$950
RPZ valve install - 20mm$1,250per device$1,550$1,850
RPZ valve install - 25-32mm (commercial / fire service)$1,250per device$2,000$3,200
Tundish / drain for RPZ (add-on)$220per install$350$480
Device repair (parts + labour)$180per repair$330$480
Like-for-like replacement (failed device)$550per device$975$1,400
Backflow hazard assessment / device sizing (per site)$150per job$300$600
After-hours test loading$100add-on$150$250
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local contractor will be in touch about your job. No spam, no call centre.

When is your backflow test due?

Tell us the month and we'll email you a reminder about a month before, with a link to get quotes. It's free.

In New South Wales testable medium and high hazard backflow devices must be tested at installation and then every year by a licensed plumber holding backflow prevention accreditation, and the plumber lodges the test report with the water utility (Sydney Water within 2 days of the test; Hunter Water through its online system; Central Coast Council each year).

We email you a month before it is due and again a week before, each time it comes around. Unsubscribe in any email. Privacy policy.

Scoping backflow testing work in Byron Bay? Get a quote from a local commercial contractor - free, no obligation.

Get Byron Bay quotes →

Prices include GST. Byron Bay metro, November 2026.

Say a guesthouse near Wategos has three testable devices and one fails at its annual test, so the tester repairs it on the same visit. The first device is $199, the other two $120 per device, and the repair $330 per repair, about $769 for the visit. With all three rows at their top figure, the same visit reaches $1,090.

Backflow testing costs in Byron Bay and what moves them

Byron Shire's testable devices are not all behind café counters. They can be found at the hospital campus at Ewingsdale, in dental and medical rooms around the town centre, on macadamia and avocado orchards in the hinterland, in schools at Bangalow and Ocean Shores, and in day spas and retreats in the hills behind town.

The same per-device rates apply across the shire, but how a visit adds up depends on a handful of practical points.

  • One valve or many. $150–$320 covers the first device of the visit, and each extra device checked while the plumber is on site is $90–$145. An orchard with valves at the spray shed, the irrigation pump and the packing area pays the higher figure only once.
  • Timing the shut-off. A day spa with a full appointment book may want the test after the last client leaves. That shifts the job out of hours and adds $100–$250.
  • The headline price. Ads quoting $80–$180 per device can be worthwhile, but compare the total invoice rather than the test line, since call-out and report lodgement may be billed on top.
  • Valves that fail. A device that won't pass is repaired for $180–$480 or replaced like for like for $550–$1,400. Either is quicker to approve if the tester has priced it before the visit.
  • Getting to the device. On rural blocks the valve may sit at the road frontage, down a farm track or inside a pump shed. Clear directions and an unlocked gate keep the visit short.
  • A new use for a building. A clinic moving into a former shop, or a farm adding a chemical mixing point, may need a hazard assessment and device sizing at $150–$600 per site before any valve is bought.

Byron Bay backflow testing prices by property type

These examples price one testing visit for property types around Byron Shire. The device count in each card is a premise for the arithmetic, not a description of a particular site.

Dental and medical rooms in the town centre

$150–$320 per visit

Assumes one testable device on the surgery supply, tested during practice hours, so the first-device price is the whole bill.

Macadamia and avocado orchards in the hinterland

$330–$610 per visit

Assumes three testable devices: one on the chemical mixing point, one on the irrigation main and one at the packing shed.

Day spas and wellness retreats

$340–$715 per visit

Assumes two testable devices, on the treatment rooms and a plunge pool line, tested after the last appointment, so one after-hours loading is added.

Schools in Bangalow and Ocean Shores

$420–$755 per visit

Assumes four testable devices across the canteen, a science room, the sports field irrigation and the fire hydrant service.

Retail blocks on Jonson Street

$510–$900 per visit

Assumes five testable devices: the fire service plus four tenancies with their own valves, all tested in one morning.

Device numbers are examples only. Every range adds the page's additional-device row for each device after the first to the first-device row, plus the after-hours row where a card says the test is out of hours.

What backflow repairs, replacements and new valves cost in Byron Bay

Not every failed test ends with a new valve. A tester can often fix a sticking check or a tired relief valve in place for $180–$480. When the valve is too far gone, a like-for-like replacement costs $550–$1,400 per device.

  • Double check valve, 20mm. $650–$950 for supply and installation, a common fit for a small clinic or office where the hazard assessment calls for one.
  • RPZ, 20mm, plus tundish. An RPZ is fitted with a tundish or drain to take any discharge. The valve at $1,250–$1,850 and the tundish at $220–$480 come to $1,470–$2,330 together.
  • RPZ, 25–32mm, for commercial or fire services. $1,250–$3,200 for the valve, or $1,470–$3,680 with its tundish. A school hall or a larger retail block on Jonson Street could need a valve of this size on its fire service.
  • Hazard assessment and sizing. $150–$600 per site. On a hinterland farm adding a spray shed, or a Bangalow shop being turned into a clinic, this step works out which valve to buy.

Getting a better backflow testing price in Byron Bay

Small changes to how you book and prepare can trim the bill without cutting corners.

  • Test the whole site in one go. Have every valve on the property done in a single visit, so you pay the $150–$320 first-device price once and $90–$145 for the rest.
  • Avoid out-of-hours slots where you can. If a short shut-off during the day is workable, booking in normal hours saves the $100–$250 loading.
  • Read the whole quote. When a per-device offer of $80–$180 catches your eye, check that call-out and lodgement of the report are written into it.
  • Mark the valves. Paint or tag each valve and note on a simple site sketch where it sits, especially on farms where devices are spread across sheds and paddocks.
  • Keep the old reports. Last year's reports show the tester which devices exist and where. Have them ready, either printed or on your phone.
  • Retire valves that keep failing. Repeated repairs at $180–$480 on an ageing valve can pass the cost of a like-for-like replacement at $550–$1,400. Plan the swap rather than paying for the same fix again.

Backflow testing cost in Byron Bay: cafés, accommodation and coastal wear

Backflow testing in Byron Bay usually costs $150–$320 per device for the first device on site, and $90–$145 per device for each additional device tested on the same visit. Budget offers of $80–$180 per device appear from time to time, but in a regional area check whether the call-out and the lodgement of the test report are included in that figure.

Much of the local work is at cafés, restaurants, holiday accommodation with pools and irrigation, and workshops in the Arts and Industry Estate. Salt air near Belongil, Wategos and Suffolk Park can corrode exposed fittings and valve bodies, so outdoor devices may need repairs at $180–$480 per repair or a like-for-like replacement at $550–$1,400 per device sooner than sheltered ones. Testers may travel in from neighbouring regional centres, and that travel is sometimes built into the first-device price.

Hospitality venues often want the test done before opening, so ask about after-hours loading, which runs $100–$250. If you are fitting a new device as part of a café fit-out in town or in Mullumbimby, a 20mm double check valve costs $650–$950 per device. A good Byron Bay quote should state travel or call-out charges, each device's test price, whether report lodgement is included, and the repair cost if a coastal-worn device fails.

What a Compliant Backflow Testing Quote Includes — Cost in Byron Bay

Testers may come to Byron Bay from neighbouring regional centres, so before comparing prices make sure each quote shows the trip, the number of devices it covers, and what a salt-worn valve that fails would add to the visit.

  • Travel or call-out shown as its own line, or a note that the first-device price of $150–$320 per device already includes it.
  • Each device placed on the block, at the road frontage, pump shed, spray shed or packing area, with gate access agreed.
  • For outdoor devices near Belongil, Wategos or Suffolk Park, the condition of each valve body and its fittings noted on the report.
  • A repair figure of $180–$480 per repair quoted before the visit, so a failed valve at a hinterland orchard can be fixed on the spot.
  • Whether sending results to Byron Shire Council is part of the job, and who handles it.
  • For a café or day spa tested before opening or after the last client, any after-hours loading named and shown once.
  • Whether GST is in the figures, the plumber's licence number and insurance, and how the next test date will be set.

Frequently Asked Questions — Backflow Testing Cost in Byron Bay

How much does a backflow test cost in Byron Bay?

A Byron Bay backflow test is priced per device. The first one on the property is $150–$320, typically $199, and each extra device done in the same trip costs $90–$145. Low offers of $80–$180 per device do appear, so check whether travel and forwarding the results to Byron Shire Council are covered. If the job falls outside business hours, add $100–$250.

How often does a backflow device have to be tested?

Byron Shire Council's backflow prevention policy says all testable devices are tested on an annual basis by a Qualified Person, meaning a licensed plumber with accredited backflow training. Byron Shire Council's policy also says the results must be forwarded to Council within 10 working days of the test. Each yearly round costs $150–$320 for the first device.

What happens if I skip the annual test?

Byron Shire Council can step in: it may test and certify the device itself and charge a fee, send reminder notices that carry a fee, or, where the hazard is an unacceptable risk, cut off the supply. Byron Shire Council requires the test to be done by a licensed plumber with accredited backflow training, with the results in Council hands no later than 10 working days after the test.

What is the difference between an RPZ and a double check valve?

The hazard assessment, $150–$600 per job, sets which testable device a connection needs. Where it points to a double check valve, a 20mm unit is $650–$950 per device fitted. For an RPZ, budget $1,250–$1,850 per device at 20mm, or $1,250–$3,200 per device at 25–32mm on commercial and fire lines, plus $220–$480 per install for the tundish or drain that takes water released by its relief valve. A double check valve has no relief valve, so it needs no tundish.

Does backflow testing cost more in Byron Bay?

Nothing in the test rows is priced up or down for Byron Bay. The bill moves with travel, as hinterland sites around Bangalow sit further out of town; with after-hours work for venues that cannot close, at $100–$250; with the number of devices tested per trip; and with repairs at $180–$480 per repair when a device fails. Byron Shire Council's policy also lets Council charge a fee if it has to test the device itself or send reminder notices.

Is it cheaper per device to test two backflow valves together in Byron Bay?

Yes. In Byron Bay the first device tested costs $150–$320, and a second device done on the same visit costs $90–$145. A brewery or food maker in the Arts and Industry Estate with valves on its process line and the main supply would pay $240–$465 in all, or near $319 at typical rates. Booked on different days, both would carry the first-device price, about $398 at typical rates, so line them up together, especially if the tester is travelling in.

If a café's backflow device fails in Byron Bay, what will it cost?

The tester will usually offer a repair first. Freeing a sticking check or replacing worn seals costs $180–$480, parts and labour in. A valve that is too far gone is replaced like for like at $550–$1,400. Either cost goes on top of the test. At typical rates a replacement runs about $645 more than a repair, so it is worth asking the tester whether the valve has another good rebuild in it. Agree on both prices before the visit and the job can be finished in one trip.

What does a new backflow device cost to fit in Byron Bay?

For a small connection where a double check valve suits, a 20mm DCV is $650–$950 installed. Where the hazard calls for an RPZ, the 20mm valve is $1,250–$1,850, and its tundish or drain brings the total to $1,470–$2,330. A 25–32mm RPZ for a commercial or fire service, the size a larger venue or school might carry, is $1,250–$3,200. If you are converting a building in Mullumbimby or setting up a new farm shed in the hinterland, a hazard assessment and sizing at $150–$600 comes first.

Are cheap backflow test prices in Byron Bay worth taking?

A rate in the $80–$180 band per device can be good value, but in a regional town the call-out is the part to watch. Testers may come from other Northern Rivers towns, and that travel has to land somewhere on the invoice. Ask whether call-out and report lodgement are both inside the per-device rate. For two devices, the budget figure at typical rates is $260, while a typical full quote is $319, so a separate travel charge can easily wipe out the difference.

Advertise with us

Reach Australian businesses researching commercial service costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage