How much does a garage door cost in Newcastle?
Roller doors are what Newcastle searches for, and a single automatic roller door installed costs $1,150–$3,325, typically $2,100; a double is $1,900–$4,275. Sectional panel doors cost more, a single at $2,175–$4,750 and a double at $2,375–$7,100, and buy a quieter door with more headroom inside. Newcastle is overwhelmingly a city of stand-alone houses with their own garages, so most quotes here are for a full-width door on a brick or weatherboard home rather than a shared door in a unit block. Supply, fitting and GST are included.
Comparing cities, or after the Australia-wide picture? See the national guide: Garage door cost in Australia.
Detailed Pricing — Garage Door Cost in Newcastle 2026
Need a roller shutter or industrial door for a business premises? See our commercial garage door cost guide for Newcastle.
| Service | Low | Typical | High |
|---|---|---|---|
| Single roller door (auto, installed) | $1,150installed | $2,100 | $3,325 |
| Single sectional door, with motor (installed) | $2,175installed | $2,900 | $4,750 |
| Double roller door (auto, installed) | $1,900installed | $3,050 | $4,275 |
| Double sectional door, with motor (installed) | $2,375installed | $3,750 | $7,100 |
| Garage door motor / opener | $380installed | $740 | $950 |
| Motor upgrade (belt-drive quiet) | $520installed | $760 | $1,150 |
| Garage door repair (minor) | $115per job | $210 | $380 |
| Spring replacement (pair) | $265per job | $380 | $520 |
| Panel replacement | $285per panel | $475 | $855 |
| Full door replacement (single, with motor) | $1,425installed | $2,650 | $5,200 |
| Full door replacement (double, with motor) | $2,375installed | $3,550 | $7,600 |
| Annual service / tune-up | $140per visit | $190 | $330 |
| Single roller door (manual, installed) | $855installed | $1,425 | $2,100 |
| Spring replacement (single, roller or sectional) | $170per job | $240 | $330 |
| Single sectional door, manual (no motor, installed) | $1,150installed | $1,900 | $2,850 |
| Tilt door, single, manual (installed) | $950installed | $1,625 | $2,650 |
| Lift cable replacement | $105per job | $200 | $380 |
| Track realignment / repair | $95per job | $170 | $330 |
| Remote or keypad replacement (supply + program) | $76per job | $140 | $210 |
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Getting quotes for garage door work in Newcastle? Get a quote from a verified local tradie — free, no obligation.
Get Newcastle quotes →Prices include GST. Based on Newcastle metro area, October 2026. Outer suburbs may vary.
Garage door prices in Newcastle (2026): installation, roller, sectional, single and double
Garage doors in Newcastle cost $1,150–$7,100 supplied and installed, from $1,150 for a single roller door with a basic opener to $7,100 for a double sectional door. Every band below is an installed price with the motor included, which is the number to compare against a door-only price from a supplier.
| Job | Low | Typical | High |
|---|---|---|---|
| Single roller door (auto, installed) | $1,150 | $2,100 | $3,325 |
| Double roller door (auto, installed) | $1,900 | $3,050 | $4,275 |
| Single sectional door, with motor (installed) | $2,175 | $2,900 | $4,750 |
| Double sectional door, with motor (installed) | $2,375 | $3,750 | $7,100 |
| Full door replacement (single, with motor) | $1,425 | $2,650 | $5,200 |
| Full door replacement (double, with motor) | $2,375 | $3,550 | $7,600 |
| Garage door motor / opener | $380 | $740 | $950 |
| Panel replacement (per panel) | $285 | $475 | $855 |
| Garage door repair (minor) | $115 | $210 | $380 |
Roller vs sectional in Newcastle: a roller door is one curtain of steel that coils above the opening, the cheapest door to buy and install ($1,150–$3,325 single, $1,900–$4,275 double, with the motor). A sectional door is hinged panels on tracks along the ceiling, $2,175–$4,750 single and $2,375–$7,100 double, with more profiles and colours and a quieter run.
Replacement and repair: swapping an old door for new, with the old one removed, is $1,425–$5,200 for a single and $2,375–$7,600 for a double. A minor repair (rollers, cables, a door off its track) is $115–$380, a damaged panel $285–$855 each, and a new motor $380–$950 fitted.
What moves a garage door quote in Newcastle:
- Size: a double door is more steel and a stronger motor; non-standard heights or widths are made to order.
- Door type and finish: a plain roller door in a standard colour is the base; sectional profiles, timber-look finishes and insulation cost more.
- Motor: a basic opener is included in the installed bands above; a quiet belt-drive, battery backup or smartphone control is an upgrade.
- The opening: new tracks, a new lintel or an opening that is out of square add labour.
- Removal: taking away the old door and motor is a separate line when it is not a like-for-like swap.
Garage door installers in Newcastle quote the bands above once they know the opening size, roller or sectional, and whether an old door has to come out.
What Affects Garage Doors Costs in Newcastle
A city of houses with garages
Eight in ten dwellings in the Newcastle region are separate houses, 80% against 65.6% across NSW, and only 7.2% are flats, against 21.7% statewide (ABS 2021 Census). Three-bedroom homes are the most common size at 41.8%. Those are the brick-and-tile and weatherboard houses with a single or double garage under the roofline, which makes the double roller at $1,900–$4,275 and the double sectional at $2,375–$7,100 the two prices to compare.
Roller or sectional
A roller curls up into a drum over the opening, so it suits a shallow garage; a sectional travels back along the ceiling, seals better and takes windows and insulated panels, which is the extra you pay from $2,100 to $2,900 on a single. The cheapest new door on this page is a manual single roller at $855–$2,100, and a manual tilt door is $950–$2,650.
Salt air off the harbour
The Nobbys weather station at the harbour mouth records rain in every month, with March the wettest at 119.2 mm and each month from March to June above 115 mm (BOM averages). Coastal suburbs add salt to that damp, and salt is what rusts tracks, springs and the bottom rail of a steel door. Ask for the door's coating and the motor's rating for a marine environment, and hose the tracks down through winter. An annual service is $140–$330.
Who can install it
One of the questions that brings Newcastle readers here is how to find a licensed tradie for a roller door. The NSW rule is a contractor licence for residential building or trade work worth over $5,000 (labour plus materials, GST in), with a written contract to match (NSW Government). A double sectional door can cross that line, up to $7,100 at the top of its band; a manual roller, at most $2,100, stays under it, but ask for the licence number anyway and check it on the Service NSW licence check.
Repair before replace
A door that still runs true is usually worth fixing: minor repairs sit at $115–$380, a new lift cable at $105–$380, a track pulled back into line at $95–$330, and both springs at $265–$520. A single damaged panel can be swapped at $285–$855 rather than the whole door. When the bottom of the door has rusted through, replacing the whole thing, motor included, runs $1,425–$5,200 on a single opening and $2,375–$7,600 on a double.
Motor, remotes and the bedroom wall
If only the opener has died, a new motor is $380–$950 on its own, and a belt-drive upgrade, worth it where a bedroom backs onto the garage, is $520–$1,150. A lost remote or a keypad is $76–$210, programmed on the spot. July mornings here average 8.5 °C (BOM averages), and cold stiffens old grease on the tracks, so a tune-up before June keeps the motor from fighting a stiff door.
Owners and renters
Close to a third of the region's homes are owned outright, 32.2%, and 30.1% are rented (ABS 2021 Census). Owners get the long view: a sectional door with insulated panels costs more up front than a roller but keeps an attached garage closer to the house temperature. Renters should report a failed door to the agent in writing; the door is the owner's fixture and so is the repair bill, and the agent will choose the installer.
How to Save Money on Garage Door Cost in Newcastle
Roller Door Cost in Newcastle: Garage Door Prices for Roller Doors
A roller door in Newcastle is priced as a whole job, not a sheet of steel: $1,150–$3,325 for a single automatic door installed, typically $2,100, and $1,900–$4,275 for a double, typically $3,050. These match the Newcastle price table above, and each row includes the motor on an automatic door. A garage roller door quote should read as one number for door, motor and fitting.
Width, drive and the old door move the price. A double needs a heavier curtain and a stronger spring, so it costs more than a single at every point in the range. Both rows are automatic doors, so the drive variation is a standard motor against a quiet or smart motor with a battery backup, which sits toward the high end of each row. Removal and disposal of the old door is rarely in the base price, so ask for it as its own line.
Roll-A-Door is the brand name most people use for a roller door, so that quote should land inside the same rows. Pick a roller door when headroom is tight or the garage is narrow; pick a sectional door, priced in the table above, when you want insulation or a wider opening. Get quotes from local installers on the same door width, and have each one state whether the motor and old-door removal are included.
- Single roller door (auto, installed): $1,150–$3,325 installed, typically $2,100
- Double roller door (auto, installed): $1,900–$4,275 installed, typically $3,050
Garage Motor Cost in Newcastle: Garage Door Motor Prices
A garage door motor in Newcastle costs $380–$950 installed, typically $740, for a standard replacement opener on an existing door. A quiet belt-drive upgrade runs $520–$1,150, typically $760. These match the Newcastle price table above, and both rows assume the door itself is sound.
What moves the price is the drive type and the door weight. A chain-drive opener is the cheapest and the loudest; a belt-drive costs more and is the one to pick when a bedroom sits above or beside the garage. A double or heavy sectional door needs a higher-torque unit, which is where the top of each range comes from. Remotes, a wall button and a battery backup are usually inside the typical figure but not always, so check the quote lists them.
Pick a garage motor replacement when the door runs freely by hand but will not lift on its own, or when the remote and the safety reverse no longer work. If the door is bent, the springs have gone or the tracks are worn, a new door from the rows above is the better spend. Get a quote that names the motor brand, the drive type and the warranty, and ask whether the old unit is removed.
- Garage door motor / opener: $380–$950 installed, typically $740
- Motor upgrade (belt-drive quiet): $520–$1,150 installed, typically $760
Frequently Asked Questions — Garage Door Cost in Newcastle
Our Methodology
These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed October 2026. Read our full methodology →