Updated November 2026·Independently researched·11 min read
Commercial signage in Brisbane runs $1,800–$5,000
for an illuminated lightbox fascia sign installed, GST included - letters, pylons, graphics and wraps below
A Brisbane shopfront with an illuminated lightbox fascia pays $1,800–$5,000 installed, most often about $3,000. An Eagle Farm freight depot after a single-tenant pylon on its road frontage sits in the $8,000–$30,000 range, and a West End coffee window that just needs a printed A-frame pays $120–$600.
+4.5%Commercial Signage costs in Brisbane are up around 4.5% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical illuminated lightbox fascia in Brisbane
$3,000
per sign installed, Brisbane 2026, GST included
Illuminated lightbox fascia sign, installed
$1,800-$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000-$10,000
Single-tenant pylon sign, 4-6 m, installed
$8,000-$30,000
$1,800$3,000$5,000
What you pay for commercial signage in Brisbane depends first on what kind of sign it is. Installed, an illuminated lightbox fascia runs $1,800–$5,000, an illuminated 3D letter set $3,000–$10,000, a single-tenant pylon of 4 to 6 metres $8,000–$30,000 and a multi-tenant pylon of 8 metres and up $15,000–$50,000. Glass is priced by area: $40–$180 a square metre for frosted film and $80–$250 a square metre for printed graphics.
Two things separate Brisbane quotes for the same fascia: the frontage and the weather. A Given Terrace or James Street shop with a heritage listing goes through the planning step first, a tenancy at Westfield Chermside or Garden City has centre guidelines on top of the council's, and a Queen Street Mall frontage needs after-hours access and a boom lift. Summer storms mean a pylon or projecting sign should come with rated fixings and a stated wind rating, and the UV load means anything printed should name a UV-stable laminate. Every illuminated sign also carries an electrical connection at $200–$2,400 by a licensed electrician, on its own line.
Add the smaller lines: design and artwork setup at $150–$960 if the logo only exists as a JPEG, old sign removal and make-good at $200–$800 when a Boundary Street West End tenancy turns over, and a full van wrap at $3,500–$8,500 for the vans that carry the name across the city. Prices include GST.
Quick answerCommercial signage in Brisbane runs $1,800–$5,000 for an illuminated lightbox fascia sign installed in 2026, $3,000–$10,000 for a set of illuminated 3D letters and $8,000–$30,000 for a single-tenant pylon, with the fascia size, illumination and council approvals setting the total. All figures on this page include GST. Get free Brisbane quotes →
Commercial Signage Prices in Brisbane 2026: Cost Table and Price List
Service
Low
Typical
High
Illuminated lightbox fascia sign, installed
$1,800per sign
$3,000
$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000per set
$5,500
$10,000
Face-lit LED 3D letter, 300-500 mm (letters only)
$150per letter
$400
$700
Single-tenant pylon sign, 4-6 m, installed
$8,000per sign
$18,000
$30,000
Multi-tenant pylon sign, 8 m and up, installed
$15,000per sign
$30,000
$50,000
Monument or entry sign, installed
$2,500per sign
$6,000
$18,000
Printed A-frame sign
$120per sign
$300
$600
Frosted or privacy window film, installed
$40/m²
$100
$180
Printed window or wall graphics, installed
$80/m²
$150
$250
Full vehicle wrap, car or sedan
$2,500per vehicle
$3,500
$4,500
Full vehicle wrap, van
$3,500per vehicle
$5,500
$8,500
Statutory safety sign, supply only
$7.50each
$40
$165
Wayfinding sign suite, per office floor
$2,000per floor
$3,500
$6,000
Electrical connection for an illuminated sign
$200per sign
$600
$2,400
Design and artwork setup
$150per job
$400
$960
Old sign removal and make-good
$200per job
$450
$800
Scoping commercial signage work in Brisbane? Get a quote from a local commercial contractor - free, no obligation.
Prices include GST. Greater Brisbane, November 2026.
What does an illuminated shopfront sign cost in Brisbane?$1,800–$5,000 installed for a lightbox fascia, $3,000 typical. A set of illuminated 3D letters costs $3,000–$10,000, and the electrical connection by a licensed electrician is a separate $200–$2,400 line.
What gets added to a Brisbane signage quote?Design and artwork setup at $150–$960 when there are no vector files, old sign removal and make-good at $200–$800 when taking over a tenancy, the electrical connection at $200–$2,400 for anything illuminated, and the council's own permit fee where a sign needs approval.
Worked Commercial Signage Cost Scenarios — Brisbane
Priced from this page's Brisbane rows: a James Street Fortitude Valley boutique, a Newstead office floor and an Acacia Ridge transport yard. Each example names the rows it draws on; the quote you get prices your frontage, the weather spec and any approval.
James Street Fortitude Valley boutique. A fashion label taking a James Street tenancy has the previous fascia removed and the wall made good at $200–$800, then installs illuminated 3D letters at $3,000–$10,000 ($5,500 typical) with the electrical connection at $200–$2,400 on a separate line, printed window graphics with a UV-stable laminate at $80–$250 a square metre, and an A-frame at $120–$600 for the footpath.
Newstead office floor. A tenant fitting out a floor in a Newstead building orders a wayfinding sign suite at $2,000–$6,000, supply-only statutory safety signs at $7.50–$165 each for the exits and plant room, frosted film on the boardroom glass at $40–$180 a square metre, and design and artwork setup at $150–$960 because the brand files are not vector.
Acacia Ridge transport yard. A transport operator on an Acacia Ridge road frontage puts up a single-tenant pylon of 4 to 6 metres at $8,000–$30,000, typically $18,000, quoted with rated fixings and with the engineering certificate and any council application named, and wraps four delivery vans at $3,500–$8,500 each.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping commercial signage work in Brisbane? Get a quote from a local commercial contractor - free, no obligation.
Prices include GST. Greater Brisbane, November 2026.
Commercial Signage Costs by Sector in Brisbane
In Brisbane, signage jobs run from the CBD, Queen Street Mall and South Bank, through the strips of James Street Fortitude Valley, Oxford Street Bulimba, Given Terrace Paddington and Boundary Street West End and the centres at Chermside, Garden City and Indooroopilly, out to the industrial frontages of Eagle Farm, Yatala, Richlands and Acacia Ridge, with the venues at Howard Smith Wharves and the Valley in between.
Shopping strips: Fortitude Valley, Bulimba, Paddington, West End - The usual order is an illuminated lightbox fascia at $1,800–$5,000 or illuminated 3D letters at $3,000–$10,000, with frosted film at $40–$180 a square metre and a printed A-frame at $120–$600; printed faces should carry a UV-stable laminate, and a frontage with a heritage listing goes through the planning step first.
Shopping centres: Westfield Chermside, Westfield Garden City, Indooroopilly - Tenancies inside the centres specify illuminated 3D letters on the bulkhead, $3,000–$10,000 installed or $150–$700 a letter supplied alone, and the centre's design guidelines apply as well as the council's approval.
Industrial frontages: Eagle Farm, Yatala, Richlands, Acacia Ridge - A single-tenant pylon at $8,000–$30,000 on the road, a multi-tenant pylon at $15,000–$50,000 at the estate entry and a monument or entry sign at $2,500–$18,000 at the gate, each quoted with rated fixings and engineering certification.
Offices: Milton, Newstead, Upper Mount Gravatt, the CBD - Floor fit-outs bring a wayfinding sign suite at $2,000–$6,000 a floor, supply-only statutory safety signs at $7.50–$165 each and printed window or wall graphics at $80–$250 a square metre for reception.
Fleets and hospitality: Eagle Farm, Howard Smith Wharves, South Bank - Trade and delivery fleets around Eagle Farm and Richlands order full van wraps at $3,500–$8,500 and car or sedan wraps at $2,500–$4,500; venues at Howard Smith Wharves, South Bank and the Valley add menu and price displays, which the ACCC says must show one total price including GST to consumers.
What a Compliant Commercial Signage Quote Includes — Cost in Brisbane
Before comparing Brisbane quotes, check each one prices the same sign size, substrate and illumination, says whether install, electrical connection and council approval are in or out, and shows design, removal and GST on their own lines.
Sign type, dimensions, substrate and finish - lightbox, fabricated letters, pylon, film or print - with illumination stated as face-lit, halo or unlit
Install as its own line, naming access equipment such as a boom lift or scaffold and any after-hours or traffic-management requirement
Electrical connection for an illuminated sign at $200–$2,400, done by a licensed electrician, with the certificate named
Design and artwork setup at $150–$960 where no print-ready vector files are supplied, or a nil line where they are
Old sign removal and make-good at $200–$800 when the frontage carries a previous tenant's sign
Sign-permit or planning application fees shown as a pass-through at the council's published rate, and who lodges it
Engineering certification for a pylon, monument or projecting sign, and the wind rating it is built to
Warranty terms on LEDs, laminates and print fade, and the service call-out basis after the warranty
A single GST basis across every line, with the sign company's ABN and proof of insurance
Commercial signage cost in Brisbane: strips, centres and storm-rated frontages
A Brisbane shopfront's commercial signage cost begins at an illuminated lightbox fascia, $1,800–$5,000 installed with $3,000 typical, or a set of illuminated 3D letters at $3,000–$10,000. On an industrial road it is $8,000–$30,000 for a single-tenant pylon and $15,000–$50,000 for a multi-tenant pylon at an estate entry, and $2,500–$18,000 for a monument or entry sign at the gate. Letters can also be bought singly: a face-lit LED letter of 300 to 500 mm is $150–$700 before install.
The frontage and the weather write the rest. A Given Terrace shop with a heritage listing or a tenancy at Chermside or Indooroopilly adds an approval step and often a prescribed letter style; a Queen Street Mall or South Bank frontage adds after-hours access and a boom lift; a pylon at Yatala or Richlands adds wind engineering and rated fixings for the storm season. Printed faces anywhere in Brisbane should name a UV-stable laminate. Around the sign sit the electrical connection at $200–$2,400, design and artwork setup at $150–$960 where there are no vector files, and old sign removal and make-good at $200–$800 at a changeover.
Whether a sign needs planning approval is set by the state planning scheme and the council, and each council publishes its own sign-permit fee schedule; the quote should name who lodges the application and show the council fee as a pass-through line rather than folding it into the sign price. For a Brisbane job, ask the sign company to say up front whether the sign needs approval at all, and to show the wind rating and the laminate as named items on the same quote.
Commercial signage cost by sign type and size in Brisbane
Quick answerBy sign type, Brisbane prices step like this: a West End or Bulimba cafe in the $120–$600 A-frame and $1,800–$5,000 lightbox bracket, a Chermside or Garden City tenancy at $3,000–$10,000 for illuminated 3D letters, and an Eagle Farm or Acacia Ridge frontage at $8,000–$30,000 to $15,000–$50,000 for a pylon.
Width and letter count drive a Brisbane sign price. A lightbox fascia is priced by width and illumination, so a long lit frontage on Oxford Street Bulimba sits near the top of $1,800–$5,000; fabricated letters are $150–$700 each for a 300 to 500 mm face-lit letter, so a long trading name on an Indooroopilly bulkhead climbs through the $3,000–$10,000 set band. Film and print are per square metre, $40–$180 for frosting and $80–$250 for printed graphics, so a glazed Newstead lobby comes down to measured metres.
Height is the other driver. A single-tenant pylon of 4 to 6 metres at $8,000–$30,000 needs a footing, engineering and a crane day; a multi-tenant pylon of 8 metres and up at $15,000–$50,000 at a Yatala estate entry needs all three at a bigger scale, with the wind rating stated on the quote. Wraps scale by vehicle: $2,500–$4,500 for a car or sedan, $3,500–$8,500 for a full van wrap on a long-wheelbase van out of Eagle Farm.
Frequently Asked Questions — Commercial Signage Cost in Brisbane
What is the price of commercial signage in Brisbane?
From our Brisbane table: $1,800–$5,000 for an illuminated lightbox fascia sign installed (typically $3,000); $3,000–$10,000 for an illuminated 3D letter set (typically $5,500); $8,000–$30,000 for a single-tenant pylon sign (typically $18,000).
How much does an illuminated shopfront sign cost in Brisbane?
An illuminated lightbox fascia sign in Brisbane costs $1,800–$5,000 installed, with $3,000 typical, plus the electrical connection at $200–$2,400 by a licensed electrician. A Queen Street Mall or South Bank frontage adds after-hours access and a boom lift to the install; a single-storey shop on Boundary Street West End usually needs neither.
What does a pylon sign cost in Brisbane?
Going by our Brisbane table, a single-tenant pylon sign of 4 to 6 metres costs $8,000–$30,000 installed, typically $18,000, and a multi-tenant pylon of 8 metres and up $15,000–$50,000. In Brisbane the usual buyers are industrial estates at Eagle Farm, Yatala, Richlands and Acacia Ridge, and the quote should name the engineering certificate, the wind rating of the fixings, the footing and who lodges any council application.
How much are illuminated 3D letters in Brisbane?
A set of 5 to 8 illuminated 3D letters installed costs $3,000–$10,000 on our Brisbane table, with $5,500 typical; priced per letter, a face-lit LED letter of 300 to 500 mm is $150–$700 for the letters alone, before install.
Do I need council approval for a sign in Brisbane?
Whether a sign needs planning approval is set by the state planning scheme and the council, and each council publishes its own sign-permit fee schedule; the quote should name who lodges the application and show the council fee as a pass-through line rather than folding it into the sign price. In Brisbane, a frontage with a heritage listing or a centre tenancy at Chermside, Garden City or Indooroopilly adds its own approval step on top; ask the sign company to show the council fee as a pass-through line and name who lodges.
Who connects an illuminated sign in Brisbane?
Energy Safe Victoria says to always engage a registered electrical contractor, who sends a licensed electrician, that do-it-yourself electrical work is illegal and that a Certificate of Electrical Safety is issued for installation work; Building Commission NSW says a licence is required for any electrical wiring work regardless of value, with a Certificate of Compliance for Electrical Work lodged through its eCert portal. On our Brisbane table the electrical connection for an illuminated sign is $200–$2,400, with $600 typical, and the sign quote should show it as its own line.
What do window graphics and frosting cost in Brisbane?
Frosted or privacy window film costs $40–$180 a square metre installed in Brisbane, and printed window or wall graphics $80–$250 a square metre. Glazed frontages in Newstead, Milton and along the Queen Street Mall are the usual Brisbane jobs; the quote should price film and print by the square metre with the measured area shown, and name a UV-stable laminate on anything printed.
What does a vehicle wrap cost in Brisbane?
A full wrap on a car or sedan costs $2,500–$4,500 in Brisbane, with $3,500 typical, and a full van wrap $3,500–$8,500. Trade and delivery fleets based around Eagle Farm, Richlands and Acacia Ridge are the usual Brisbane buyers; wraps are priced per vehicle, and the quote should name the film brand, the laminate and the warranty.
What signs does a Brisbane workplace have to have?
The National Construction Code 2022, Volume One Part E4, requires an exit sign on, above or beside every required exit, direction signs where an exit is not readily apparent, and exit signs that comply with AS/NZS 2293.1 or the Specification 25 photoluminescent alternative and are lit whenever the building is occupied. WorkSafe ACT classes workplace safety signs as prohibition, mandatory, danger, warning, emergency and fire signs, with colours and placement set by AS 1319-1994 Safety signs for the occupational environment, and the Safe Work Australia model code of practice for the work environment says exit locations should be easy to identify, with signs pointing to exit doors. Supply-only statutory safety signs cost $7.50–$165 each on our Brisbane table. A Brisbane office floor in Milton or Newstead usually bundles those with a wayfinding sign suite at $2,000–$6,000; ask for the floor plan the signs were set out from.