Updated November 2026·Independently researched·10 min read
Test and tag in Byron Bay runs $3.50–$9.50 per item
for a job of 1 to 50 items, as published by testers (most ex GST) - larger jobs, minimum charges, RCD and exit light tests below
A Jonson Street surf retailer with registers, a workshop bench and a staff kitchen pays $3.50–$9.50 per item, $5.50 typical, or the minimum site charge of $89–$250 when the count is small. An Arts and Industry Estate brewery with a canning line prices its single-phase gear at $3.20–$6 per item and the three-phase pumps and chiller at $4–$9.50 per item on their own line.
+4.8%Test and Tag costs in Byron Bay are up around 4.8% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical per-item rate in Byron Bay, 1-50 items
$5.50
per item tested and tagged, Byron Bay 2026, as published
Test and tag, 1-50 items
$3.50-$9.50
Test and tag, 51-200 items
$3.20-$6
Test and tag, 200+ items
$2.10-$4.95
$3.50$5.50$9.50
Test and tag around Byron Bay is quoted per item in bands: $3.50–$9.50 per item for 1 to 50 items, $3.20–$6 for 51 to 200 and $2.10–$4.95 for 200 or more, with a minimum site charge of $89–$250 for a Bangalow shop or a Brunswick Heads kiosk that does not reach the first band. Where the count is open, as at a Ballina hire yard with leads out on jobs, the tester works to an hourly rate of $60–$150.
Distance is the Northern Rivers lever. A tester driving between Byron, Mullumbimby, Ballina and Lismore prices the day as much as the items, so a holiday-let manager with properties from Brunswick Heads to Ballina wants one route price rather than a minimum site charge of $89–$250 at every door. Fixed RCDs at $5–$20 per unit and portable RCDs at $5.49–$12 per unit are counted beside the appliances, not inside them.
Then the add-ons: emergency and exit lights at $7–$20 per fitting in a Jonson Street venue, microwaves at $5–$30 per unit in a Bangalow cafe or a holiday-park camp kitchen, a fire extinguisher or fire blanket inspection with the visit at $10–$35 per unit, leads and power boards at $2–$8 per item and a plug top replaced on the spot at $15–$55 per item. Prices are as published by testers, most of them ex GST.
Quick answerTest and tag in Byron Bay runs $3.50–$9.50 per item for a job of 1 to 50 items in 2026, $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, with a minimum site charge of $89–$250 where the item count is small. Fixed RCD tests add $5–$20 per unit and emergency and exit light tests $7–$20 per fitting. Prices are as published by testers, most of them ex GST. Get free Byron Bay quotes →
Test and Tag Prices in Byron Bay 2026: Cost Table and Price List
Service
Low
Typical
High
Test and tag, 1-50 items
$3.50per item
$5.50
$9.50
Test and tag, 51-200 items
$3.20per item
$4.50
$6
Test and tag, 200+ items
$2.10per item
$3.50
$4.95
Minimum site charge or call-out
$89per visit
$125
$250
Fixed RCD test, push-button and trip time
$5per unit
$15
$20
Portable RCD test
$5.49per unit
$9.50
$12
Emergency and exit light test, six-monthly
$7per fitting
$12
$20
Microwave leakage test
$5per unit
$15
$30
Three-phase equipment test
$4per item
$8
$9.50
Fire extinguisher or fire blanket inspection, with a test-and-tag visit
$10per unit
$15
$35
Hourly rate, unknown item count or complex site
$60per hour
$90
$150
Extension lead or power board test
$2per item
$5
$8
Plug top replaced on site
$15per item
$25
$55
Scoping test and tag work in Byron Bay? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Byron Bay and the Northern Rivers, November 2026.
What does test and tag cost per item in Byron Bay?$3.50–$9.50 per item for a small job of 1 to 50 items, $5.50 typical. The rate steps down with volume: $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, and most testers apply a minimum site charge of $89–$250.
What gets added to a Byron Bay test and tag quote?Fixed RCD push-button and trip-time tests at $5–$20 per unit, portable RCDs at $5.49–$12 per unit, emergency and exit lights at $7–$20 per fitting, microwave leakage tests at $5–$30 per unit, three-phase equipment at $4–$9.50 per item, and a plug top replaced on the spot at $15–$55 per item.
Worked Test and Tag Cost Scenarios — Byron Bay
Byron Bay examples priced from this page's rows: an Arts and Industry Estate brewery, a Brunswick Heads holiday park and a hire yard on Ballina's Southern Cross estate. Each line names the row it draws on; the quote you receive prices your own item count and the drive to reach it.
Arts and Industry Estate brewery. A brewery with a taproom and a canning line books its single-phase gear, bar fridges, point-of-sale and office equipment at $3.20–$6 per item for 51 to 200 items, typically $4.50, the three-phase pumps, chiller and canning line at $4–$9.50 per item, the switchboard RCDs at $5–$20 per unit, the taproom's emergency and exit lights at $7–$20 per fitting and a fire extinguisher inspection at $10–$35 per unit, with the visit before the taproom opens.
Brunswick Heads holiday park. A holiday park with cabins, a camp kitchen and a kiosk has the cabin kettles, toasters and heaters, the camp kitchen's appliances and the kiosk's fridges tested at $2.10–$4.95 per item once the count across every cabin passes 200, typically $3.50, with the camp kitchen microwaves at $5–$30 per unit, the kiosk's leads and boards at $2–$8 per item and plug tops replaced on the spot at $15–$55 per item so a cabin is not left without a kettle.
Southern Cross estate hire yard. An equipment hire yard near Ballina's airport with leads, grinders, pumps and generators moving in and out works to an hourly rate of $60–$150 because the count changes daily, with the portable RCDs issued with each lead at $5.49–$12 per unit and the yard's own office at $3.50–$9.50 per item ($5.50 typical) under the minimum site charge of $89–$250, and the register kept in the hire system's asset numbers.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping test and tag work in Byron Bay? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Byron Bay and the Northern Rivers, November 2026.
Test and Tag Costs by Sector in Byron Bay
Byron Bay's test and tag work runs from the shops and venues of Jonson Street, Lawson Street and Bangalow's Byron Street, through the makers and food producers of the Arts and Industry Estate and South Lismore, to the holiday accommodation at Brunswick Heads, the centres at Mercato on Byron and Ballina Fair, the university at Lismore and the hospital at Ewingsdale, and the hire and trade yards of Ballina's Southern Cross estate.
Venues and holiday accommodation: Jonson Street, Bangalow, Brunswick Heads - Bars and cafes at $3.50–$9.50 or $3.20–$6 per item with microwaves at $5–$30 per unit, emergency and exit lights at $7–$20 per fitting and a fire blanket inspection at $10–$35 per unit; holiday lets and parks counted across every cabin, often reaching $2.10–$4.95 per item, with one route price asked for instead of a minimum site charge of $89–$250 per property.
Makers and food producers: the Arts and Industry Estate, South Lismore - Three-phase ovens, mixers, pumps and compressors at $4–$9.50 per item beside single-phase bench gear at $3.20–$6 per item, switchboard RCDs at $5–$20 per unit and plug tops replaced on the spot at $15–$55 per item so a production line is not down waiting on a part.
Studios, gyms and clinics: Byron, Ewingsdale, Ballina - Treatment-room equipment, cardio machines, heaters and sound gear at $3.50–$9.50 per item for a single studio, with the power boards behind every bank of machines at $2–$8 per item and the switchboard RCDs at $5–$20 per unit; medical suites around the hospital at Ewingsdale add their own plug-in list on the same visit.
Schools, university and childcare: Lismore, Mullumbimby, Ballina - Classroom and lab equipment at $2.10–$4.95 per item once a campus count passes 200, a Burringbar Street childcare centre at $3.50–$9.50 per item, and the register handed over by building and room so each site can find its own items.
Trades, hire and spread-out sites: Ballina's Southern Cross estate, River Street, Lismore - Hire fleets and site sheds with leads at $2–$8 per item and portable RCDs at $5.49–$12 per unit, an hourly rate of $60–$150 where the count cannot be fixed before the visit, and a route price for a trade business with a Ballina yard, a Lismore depot and a Byron shopfront.
What a Compliant Test and Tag Quote Includes — Cost in Byron Bay
Before comparing Byron Bay quotes, check each one prices the same item count in the same band, says whether the minimum site charge covers a stated number of items, and lists RCDs, exit lights, microwaves and three-phase equipment on their own lines with the GST basis stated.
The per-item rate and the band it sits in - 1 to 50, 51 to 200 or 200 or more items - at $3.50–$9.50, $3.20–$6 or $2.10–$4.95 per item
The minimum site charge at $89–$250 and exactly how many items it covers before the per-item rate starts
Fixed RCD push-button and trip-time tests at $5–$20 per unit and portable RCDs at $5.49–$12 per unit, counted separately from appliances
Emergency and exit light tests at $7–$20 per fitting, with the six-monthly discharge test named
Microwave leakage tests at $5–$30 per unit and three-phase equipment at $4–$9.50 per item as their own lines
Fire extinguisher and fire blanket inspections at $10–$35 per unit where bundled with the visit, and who services them otherwise
Extension leads and power boards at $2–$8 per item, and the on-site repair basis - a plug top replaced at $15–$55 per item
The tester's competency - a nationally accredited portable appliance testing course or an electrical licence - and the register and report included
A single GST basis across every line, with the retest interval the quote assumes and the tester's ABN and insurance
Test and tag cost in Byron Bay: venues, makers and spread-out sites
Test and tag cost in Byron Bay is set by the item count: $3.50–$9.50 per item for 1 to 50 items (typically $5.50), $3.20–$6 per item for 51 to 200 (typically $4.50) and $2.10–$4.95 per item for 200 or more (typically $3.50), with a minimum site charge of $89–$250 where a Lawson Street shop or a Bangalow cafe sits under the first band. Every plug-in item counts, so a Mercato on Byron tenancy should count chargers, fans, fridges and power boards, not only the register.
The drive and the add-ons write the rest of a Northern Rivers quote. Fixed RCDs at $5–$20 per unit and portable RCDs at $5.49–$12 per unit sit on their own lines; emergency and exit lights at $7–$20 per fitting, microwaves at $5–$30 per unit and three-phase equipment at $4–$9.50 per item are counted separately in an Arts and Industry Estate production space or a Jonson Street venue; a fire extinguisher or fire blanket inspection with the visit is $10–$35 per unit. Repairs on the spot are a plug top at $15–$55 per item, leads and boards test at $2–$8 per item, and a Ballina hire yard with no fixed count goes to an hourly rate of $60–$150.
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. SafeWork NSW says the frequency of inspection and testing varies depending on the nature of the workplace, that AS/NZS 3760 outlines the inspection, testing and tagging methods and frequency, that the construction-site frequency is set out in AS/NZS 3012, and that a competent person is one who has the knowledge and skills acquired through training, qualification or experience; its amusement-devices guidance asks for test and tag, including RCDs, at least every 12 months by a competent person. For a Byron Bay site, ask the tester to put the course or licence on the quote and to say whether the register comes as a file you can search by property or room.
Test and tag cost by item count and site type in Byron Bay
Quick answerByron Bay pricing steps by count and site: a Bangalow cafe or a Lawson Street shop sits at the minimum site charge of $89–$250 or $3.50–$9.50 per item, a Jonson Street venue or an Arts and Industry Estate workshop at $3.20–$6 per item, and a holiday park or a Lismore campus at $2.10–$4.95 per item with three-phase plant at $4–$9.50 per item on top.
Count moves a Byron Bay price in steps. A Burringbar Street childcare centre with a few dozen items pays $3.50–$9.50 per item or the minimum site charge of $89–$250; a Mercato on Byron tenancy past 50 items drops to $3.20–$6 per item; a Brunswick Heads holiday park counted across every cabin or a Lismore campus past 200 items drops again to $2.10–$4.95 per item. Ask which band the quote assumes and whether a count that lands over the line on the day is re-rated.
Site type moves the add-ons. A Ballina office is appliances plus switchboard RCDs at $5–$20 per unit and exit lights at $7–$20 per fitting; a Bangalow kitchen adds microwaves at $5–$30 per unit and a fire blanket inspection at $10–$35 per unit; an Arts and Industry Estate workshop adds three-phase plant at $4–$9.50 per item, portable RCDs at $5.49–$12 per unit and plug tops at $15–$55 per item; a holiday-let manager with properties from Brunswick Heads to Ballina pays for leads and boards at $2–$8 per item in every kitchen, or an hourly rate of $60–$150 if the day is mostly driving.
Frequently Asked Questions — Test and Tag Cost in Byron Bay
What is the price of test and tag in Byron Bay?
From our Byron Bay table: $3.50–$9.50 per item for 1 to 50 items (typically $5.50); $3.20–$6 per item for 51 to 200 items (typically $4.50); $2.10–$4.95 per item for 200 or more (typically $3.50); minimum site charge $89–$250.
How much does test and tag cost per item in Byron Bay?
A small job of 1 to 50 items costs $3.50–$9.50 per item in Byron Bay, with $5.50 typical, and the rate steps down to $3.20–$6 for 51 to 200 items and $2.10–$4.95 for 200 or more. A Lawson Street shop or a Ballina office usually sits in the first band; an Arts and Industry Estate production space or a holiday park counted across every cabin is where the count crosses into $3.20–$6 or $2.10–$4.95 per item, and the drive between Byron, Ballina and Lismore is what the tester prices on top.
What is the minimum charge for test and tag in Byron Bay?
Going by our Byron Bay table, the minimum site charge or call-out is $89–$250, typically $125, and it usually covers a stated number of items before the per-item rate applies. A Bangalow cafe or a Brunswick Heads kiosk with a dozen items is the usual Byron Bay minimum-charge job, and the quote should say how many items the $89–$250 covers and whether a holiday-let portfolio is one route price or a site charge per property.
How much does RCD testing cost in Byron Bay?
A fixed RCD push-button and trip-time test is $5–$20 per unit on our Byron Bay table, with $15 typical, and a portable RCD test $5.49–$12 per unit; both are counted separately from the appliances plugged into them.
How often does equipment need to be tested and tagged in Byron Bay?
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. Around Byron Bay, ask the tester to keep the register by property or building - a Jonson Street venue, a Ballina yard, a Lismore campus - and to mark the retest date on each item so the next visit covers every site in one drive.
Who is allowed to test and tag in Byron Bay?
SafeWork NSW says the frequency of inspection and testing varies depending on the nature of the workplace, that AS/NZS 3760 outlines the inspection, testing and tagging methods and frequency, that the construction-site frequency is set out in AS/NZS 3012, and that a competent person is one who has the knowledge and skills acquired through training, qualification or experience; its amusement-devices guidance asks for test and tag, including RCDs, at least every 12 months by a competent person. On our Byron Bay table an hourly rate of $60–$150 applies where the item count is unknown or the site is complex, with $90 typical.
What do emergency and exit light tests cost in Byron Bay?
Emergency and exit light tests cost $7–$20 per fitting in Byron Bay on a six-monthly cycle, with $12 typical, and most testers quote them alongside the appliance visit. Venues on Jonson Street and in Bangalow, the centres at Mercato on Byron and Ballina Fair and the holiday parks at Brunswick Heads are the usual Byron Bay buyers, and the quote should count every fitting over every exit and in every corridor and say whether the discharge test is in the $7–$20 per fitting price.
Does test and tag cover microwaves, three-phase equipment and fire extinguishers in Byron Bay?
A microwave leakage test is $5–$30 per unit, three-phase equipment $4–$9.50 per item and a fire extinguisher or fire blanket inspection bundled with the visit $10–$35 per unit on our Byron Bay table. Cafes in Bangalow and on Jonson Street add microwaves, makers on the Arts and Industry Estate and in South Lismore add three-phase plant, and both carry extinguishers; the quote should list each on its own line and say who services the extinguishers the $10–$35 per unit inspection finds due.
What does a failed item cost to fix during a Byron Bay test and tag visit?
A plug top replaced on site costs $15–$55 per item on our Byron Bay table, with $25 typical, and an extension lead or power board test $2–$8 per item. AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, was published on 29 June 2022 as a complete revision superseding AS/NZS 3760:2010, and Standards Australia describes its interval recommendations as based on equipment type, environment and usage; AS/NZS 2293.2:2019 is the routine service and maintenance part of the emergency lighting and exit sign standard. On an Arts and Industry Estate or Southern Cross estate visit, ask the tester to show plug tops replaced on the spot at $15–$55 per item as a separate line and to list the leads at $2–$8 per item that were tagged out, so the hire desk knows what not to send out.