How much does a plumber cost in Hobart?
A Hobart plumber charges about $110 an hour in business hours, within a range of $72–$180, and most add a call-out fee of $54–$135 just to come to you. Evenings, weekends and public holidays lift the hourly rate to $135–$270. Plenty of small jobs are quoted at a set price instead: fixing a leaking tap is $72–$235, and clearing a standard blocked drain $135–$450. The table lists the common jobs, and the cards below explain where a Hobart bill moves within each band, from sewer blockages to hot water in a cool climate. All prices include GST.
Comparing cities, or after the Australia-wide picture? See the national guide: Plumber cost in Australia.
Plumber Prices in Hobart 2026: Cost Table, Price List and Hourly Rates
Plumbing a commercial premises? See our commercial plumbing cost guide for Hobart. Need a backflow prevention device tested or installed? See the backflow testing cost guide for Hobart.
| Service | Low | Typical | High |
|---|---|---|---|
| General plumbing (hourly rate) | $72/hr | $110 | $180 |
| Call-out / service fee | $54flat | $110 | $135 |
| Fix a leaking tap | $72per job | $155 | $235 |
| Blocked drain (standard) | $135per job | $290 | $450 |
| Blocked drain (CCTV + jetting) | $315per job | $630 | $990 |
| Toilet repair | $135per job | $225 | $315 |
| Toilet installation (supply + fit) | $360per job | $540 | $810 |
| Hot water system (gas storage) | $1,075installed | $1,975 | $3,150 |
| Hot water system (electric) | $720installed | $1,625 | $2,700 |
| Hot water system (heat pump) | $2,700installed | $3,775 | $5,400 |
| Gas fitting (per point) | $225per point | $360 | $585 |
| Burst pipe repair | $180per job | $495 | $720 |
| Tap replacement | $135per tap | $295 | $450 |
| Bathroom rough-in | $1,800total | $2,875 | $5,850 |
| Emergency / after-hours | $225per visit | $405 | $630 |
| After-hours hourly rate (evenings, weekends, public holidays; excl. call-out) | $135/hr | $200 | $270 |
| Bathroom fit-off (fixture connection, after tiling) | $900total | $1,800 | $2,700 |
| Toilet relocation (new drain position) | $720total | $2,250 | $3,600 |
| Laundry renovation plumbing (rough-in + fit-off) | $1,350total | $2,525 | $4,500 |
You're in.
A local installer will be in touch about your job. No spam, no call centre.
Prices include GST. Based on Hobart metro area, November 2026. Outer suburbs may vary.
Hobart plumbing: a two-hour job, repair or replace, and after hours
A two-hour plumbing job in Hobart, worked out
With our Hobart table's typical hourly rate ($110) and call-out fee ($110), two hours of work come to $330. The full ranges are $72–$180 an hour and $54–$135 for the call-out.
Repair or replace: taps and toilets in Hobart
Fixing a leaking tap is $72–$235 in our Hobart table and replacing the tap $135–$450, so at the typical figures a new tap costs $140 more than a repair. A new toilet, supplied and fitted, is $360–$810.
After-hours plumbing in Hobart
Outside business hours our Hobart table prices a visit at $225–$630, which at the typical figures is $295 more than the standard call-out.
These answers use the prices in the table on this page.
What Affects Plumber Costs in Hobart
Whose side is the blockage on?
TasWater maintains the sewer mains and branch lines up to your connection point; every drain from the first inspection opening back to the house is the owner's. If sewage spills out of that opening, the blockage is beyond your boundary, so ring TasWater on 13 6992, at any hour. TasWater may repay a plumber for up to two hours spent establishing that the fault is in its system.
Drains that keep blocking
A standard blocked drain cleared with an electric eel costs $135–$450. When the same drain blocks again, a plumber can send a camera down the line and jet it clean for $315–$990, which also shows whether roots or a cracked pipe are behind it. On a block with old clay sewer pipes and established trees, that one visit can end the cycle of repeat call-outs.
Hot water in climate zone 7
Hobart is in NCC climate zone 7, the cool end of the scale, and a hot water unit works hard to lift cold winter supply. Supplied and installed, an electric storage unit is $720–$2,700, gas storage $1,075–$3,150 and a heat pump $2,700–$5,400. Under the National Construction Code a new installation delivers water no hotter than 50 °C at outlets used for washing, usually through a tempering valve.
Cold nights and burst pipes
July nights in Hobart average 4.6 °C at the Ellerslie Road station (BOM averages), and water that freezes in an exposed pipe can split it. A burst pipe repair costs $180–$720, and access sets where in that band you land: a pipe under a timber floor is easier to reach than one inside a tiled wall. Lagging outdoor pipes is cheap protection.
After hours or next morning
Call a plumber at night or on a weekend and you pay $135–$270 an hour plus the call-out; a full emergency attendance is $225–$630 in our table. A burst pipe justifies that. A dripping tap or slow drain does not: turn the water off at the meter if needed and book a business-hours visit.
Plumber and gasfitter in one
People in Hobart often look for a plumber and gasfitter in the same business. In Tasmania both trades are licensed occupations, each listed by CBOS (Consumer, Building and Occupational Services), and a tradesperson holding both can fit a gas hot water unit or add a gas point, priced at $225–$585, in one visit.
Toilets, taps and set prices
With 85.1% of Greater Hobart dwellings separate houses (ABS 2021 Census), most plumbing jobs involve one owner and no strata manager to clear things with. A toilet repair is $135–$315, a new suite supplied and fitted $360–$810, and a replacement tap $135–$450. For jobs like these, ask for a fixed price rather than an open hourly rate.
How to Save Money on Plumber Cost in Hobart
Hobart Plumbing Costs by Area
Central Hobart / Battery Point / Sandy Bay — Premium pricing due to older housing stock and difficult access. Many homes have original clay pipes (80+ years old) needing replacement or relining. Steep terrain and heritage considerations add complexity. Street parking limitations mean plumbers may charge extra for access.
Northern suburbs (Glenorchy, Moonah, New Town) — Standard pricing. Post-war housing with a mix of old and updated plumbing. Hot water system replacements and bathroom renovations are the most common jobs.
Eastern Shore (Bellerive, Howrah, Lindisfarne) — Moderate pricing with good access. More modern housing stock than the western shore. Growing demand from new developments in the Clarence area.
Kingston / Huon Valley — Travel charges may apply from Hobart-based plumbers. Mix of residential and rural properties. Rainwater tank plumbing and septic systems are common in semi-rural areas south of Kingston.
Plumber Cost in Hobart by Job Size
Consider a fit-off in a Hobart bathroom that is quoted by the day instead, with the plumber on site for eight hours. Eight hours at $72 an hour plus the call-out at $54 comes to $630, and at the high ends, $180 an hour plus $135 comes to $1,575. The fixed row is $900–$2,700 total, so the number of days the plumber expects to be on site should be written next to any hourly figure.
Hobart's older streets can make a large job grow. Homes in Sandy Bay and Battery Point come with steep terrain, heritage considerations and limited street parking, which can add a charge for access. On the Eastern Shore, in Bellerive and Howrah, access is good, and travel out to Kingston may be charged on top.
Plumber Cost in Hobart: What the Quote Should Include
In Hobart the older streets of Sandy Bay and Battery Point bring steep ground, street parking and old clay pipes into a plumbing quote, while an address toward Kingston brings travel into it. Written as separate lines, those items can be compared.
- The fault and the pipe it is on, with clay sewer pipes and established trees noted where a drain keeps blocking.
- Where access is steep or parking is limited, the extra time or charge shown as its own line and not folded in.
- The call-out fee against its row of $54–$135, and whether the first hour absorbs it or it is billed in addition.
- Labour at $72–$180 an hour, with after-hours time on a separate line at $135–$270 an hour.
- Burst pipes: where the pipe runs, under a timber floor or inside a tiled wall, noted on the quote, because access decides where the price lands within $180–$720.
- Where a bathroom is being redone, the fit-off priced apart from the pipes laid before tiling, against the row of $900–$2,700 total.
- A plumber who is also a gasfitter: gas points counted and priced separately, against the row of $225–$585 a point, in the same quote.
- Away from the city, in Kingston or toward the Huon Valley, any travel charge and any rainwater tank or septic plumbing as separate lines.
- Warranty on parts and workmanship in writing, GST shown, and the start date with any payment stages.
Frequently Asked Questions — Plumber Cost in Hobart
Our Methodology
These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed November 2026. Read our full methodology →