Updated November 2026·Independently researched·10 min read
Pallet racking in Townsville runs $342.54–$417 per starter bay
supply only, for a starter bay of two frames plus beams, as published by suppliers (GST basis mixed) - add-on bays, fit-outs, inspections and parts below
A mining and industrial supplies depot at Bohle extending a run for heavy spares buys add-on bays at $218–$630 each behind a starter bay at $342.54–$417, supply only, with freight to Townsville shown separately. A Garbutt beverage wholesaler past 1,000 pallet positions books its racking safety inspection at $795–$2,000.
+4.5%Pallet Racking costs in Townsville are up around 4.5% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical starter bay price in Townsville, supply only
$350
per bay of two frames plus beams, Townsville 2026, as published
Selective pallet racking starter bay (2 frames plus beams), supply only
$342.54-$417
Selective pallet racking add-on bay (1 frame plus beams), supply only
$218-$630
Small-to-medium warehouse racking fit-out (up to about 20 bays)
$2,000-$10,000
$342.54$350$417
Townsville racking is quoted as supply-only bays, a small fit-out or an inspection. The starter bay of two frames plus beams is $342.54–$417; each add-on bay of one frame plus beams $218–$630; a small-to-medium warehouse fit-out of up to about 20 bays $2,000–$10,000 per job; and an inspection $250–$695 up to about 1,000 pallet positions or $795–$2,000 beyond.
Because bays and parts are sold supply only, a Townsville quote should show what it costs to truck them to the site. Inside the bands, heavy mining and industrial spares at Bohle go on tall bays with long beams toward $120 each; boxed stock at a Mount St John unit on low bays with short beams near $27. Upright protectors at $22–$73.70 each, safe working load (SWL) signs at $30.58–$49 each and wire mesh decks at $36.70–$45 each are separate lines.
After the install, a Mount St John or Stuart unit inspects at $250–$695 and a Bohle or Garbutt shed past 1,000 pallet positions at $795–$2,000. Beams the inspector condemns are bought as parts at $27–$120 each, supply only, and holding a few spares in the shed shortens the wait after a knock.
Quick answerPallet racking in Townsville runs $342.54–$417 per starter bay of two frames plus beams in 2026, supply only, and $218–$630 per add-on bay of one frame plus beams that joins it. A small-to-medium warehouse fit-out of up to about 20 bays runs $2,000–$10,000 per job, and a racking safety inspection $250–$695 for a small site of up to about 1,000 pallet positions or $795–$2,000 for a larger one. Prices are as published by racking suppliers and inspectors; the GST basis is mixed, as each source page states it. Get free Townsville quotes →
Pallet Racking Prices in Townsville 2026: Cost Table and Price List
Service
Low
Typical
High
Selective pallet racking starter bay (2 frames plus beams), supply only
$342.54per bay
$350
$417
Selective pallet racking add-on bay (1 frame plus beams), supply only
$218per bay
$251
$630
Small-to-medium warehouse racking fit-out (up to about 20 bays)
$2,000per job
$5,000
$10,000
Racking safety inspection, small site (up to about 1,000 pallet positions)
$250per inspection
$495
$695
Racking safety inspection, larger site (over 1,000 pallet positions)
$795per inspection
$1,500
$2,000
Upright protector / column guard, supply only
$22each
$40.82
$73.70
Safe working load (SWL) sign, supply only
$30.58each
$40
$49
New pallet racking beam, supply only (1,372 mm to 3,810 mm)
$27each
$57.42
$120
Wire mesh deck, 838 mm deep, supply only
$36.70each
$39
$45
Scoping pallet racking work in Townsville? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by racking suppliers and inspectors; the GST basis is mixed, as each source page states it. Townsville, November 2026.
What does a pallet racking bay cost in Townsville?$342.54–$417 for a starter bay of two frames plus beams, supply only, $350 typical. Each add-on bay of one frame plus beams joins the run at $218–$630, and a small-to-medium fit-out of up to about 20 bays runs $2,000–$10,000 per job.
What else goes on a Townsville pallet racking quote?Racking safety inspections at $250–$695 for a small site or $795–$2,000 for a larger one, upright protectors at $22–$73.70 each, safe working load (SWL) signs at $30.58–$49 each, new beams at $27–$120 each and wire mesh decks at $36.70–$45 each, the parts all supply only.
Worked Pallet Racking Cost Scenarios — Townsville
Townsville examples priced from this page's rows: a Bohle mining and industrial supplies depot, a Garbutt beverage wholesaler and a Stuart transport yard's fit-out. Each figure names its row; your own quote prices your bays and freight.
Bohle mining and industrial supplies depot. A resources supplier extends a run with add-on bays at $218–$630 each ($251 typical) behind its starter bay, long beams toward $120 each for heavy spares and steel guards at $22–$73.70 each at the forklift ends, with freight shown on its own line.
Garbutt beverage wholesaler. A drinks wholesaler past 1,000 pallet positions inspects at $795–$2,000 ($1,500 typical), orders the beams the report lists at $27–$120 each from the original maker plus a few spares, and adds SWL signs at $30.58–$49 each on the runs it extends.
Stuart transport yard's fit-out. A transport and freight business taking a new Stuart shed has a small-to-medium fit-out of up to about 20 bays priced at $2,000–$10,000 per job ($5,000 typical), starting each run with a starter bay at $342.54–$417, and the delivery, assembly and anchoring stated on the quote.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping pallet racking work in Townsville? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by racking suppliers and inspectors; the GST basis is mixed, as each source page states it. Townsville, November 2026.
Pallet Racking Costs by Sector in Townsville
Townsville's racking buyers are the mining and industrial suppliers of Bohle, the beverage and food wholesalers of Garbutt, the trade and parts units of Mount St John, the transport and freight yards of Stuart, and the stockrooms behind Stockland Townsville, Castletown and Willows.
Mining and industrial suppliers: Bohle - Tall bays toward $417 per starter bay, long beams toward $120 each and steel guards at $22–$73.70 each on the forklift aisles.
Beverage and food wholesalers: Garbutt - Long aisles of add-on bays at $218–$630 each and inspections at $795–$2,000 once past 1,000 pallet positions.
Trade and parts units: Mount St John - Short runs with wire mesh decks at $36.70–$45 each for boxed parts and a small-site inspection at $250–$695.
Transport and freight yards: Stuart - New-shed fit-outs of up to about 20 bays at $2,000–$10,000 per job and SWL signs at $30.58–$49 each on the run ends.
Retail stockrooms: Stockland Townsville, Castletown and Willows - One short run behind the shop, strap-on protectors near the $22 end of the band and a booked dock delivery.
What Townsville Pallet Racking Jobs Actually Cost
Townsville racking work comes from the western and southern industrial estates. Bohle mining and industrial suppliers run tall bays with long beams toward $120 and guards at $22–$73.70 each; Garbutt beverage and food wholesalers run long aisles of add-ons at $218–$630 each and, past 1,000 pallet positions, inspect at $795–$2,000.
Stuart transport yards moving into new sheds land in the fit-out band of $2,000–$10,000 per job, while Mount St John parts units and the stockrooms behind Castletown and Willows buy a starter bay at $342.54–$417, decks at $36.70–$45 each, SWL signs at $30.58–$49 each and a small-site inspection at $250–$695.
What Affects Pallet Racking Costs in Townsville
In Townsville, freight, inspector travel, the weight of the stock and the size of the site set where a racking quote lands.
Trucking to North Queensland - The $342.54–$417 starter bay and $218–$630 add-on bay are supply-only prices; the cost of trucking them to Bohle or Garbutt sits on its own line.
An inspector from out of town - Where the inspector is not Townsville-based, travel may sit on top of the $250–$695 or $795–$2,000 inspection price; get it written into the quote.
Heavy spares at Bohle - Heavy mining and industrial stock goes on tall bays toward $630 per add-on and long beams toward $120 each.
Site size at Garbutt - Past about 1,000 pallet positions an inspection moves to $795–$2,000; the largest sheds are quoted on request.
Spare parts held in the shed - Holding a couple of spare beams at $27–$120 each and a guard or two at $22–$73.70 each means a knocked bay at Bohle or Garbutt is fixed from the shelf rather than after the next delivery.
Boxed parts at Mount St John - Boxed stock adds wire mesh decks at $36.70–$45 each per level, which pallet-only aisles do not carry.
How to Control Pallet Racking Costs in Townsville
In Townsville, spend is held down by putting everything on one truck, getting the inspector up once, and protecting the aisles so fewer parts make the trip north.
Put the spare beams, signs and decks on the same order as the add-on bays, so one freight line to Bohle or Garbutt covers the lot.
Line up the inspection with any repair work at a Stuart yard, so the inspector makes one trip instead of two.
Guard the forklift aisle ends at a Bohle depot with steel column guards at $22–$73.70 each before the first knock; a replacement beam at $27–$120 each arrives with its own freight.
Record the racking maker at a Mount St John unit when it is installed, so later add-on bays and beams are ordered to match.
What a Compliant Pallet Racking Quote Includes — Cost in Townsville
Before comparing Townsville quotes, check each one prices the same run of starter and add-on bays at the same frame height and beam length, says what a fit-out price covers, sizes an inspection by pallet positions, and lists protectors, signs, beams and decks on their own lines with the GST basis stated.
The starter bay at $342.54–$417, supply only, with the frame height, beam length and number of beam levels stated
Each add-on bay at $218–$630, the number of add-on bays joined to the starter bay, and the same frame and beam size along the run
For a fit-out, the per-job price in the $2,000–$10,000 band, the bay count it covers and whether delivery, assembly and anchoring are inside it
A small-site inspection at $250–$695 or a larger-site inspection at $795–$2,000, with the site's pallet position count stated
What the inspection report includes - photos, risk stickers on damaged parts and a list of the repairs found - and whether those repairs are quoted separately
Upright protectors at $22–$73.70 each, with the type named, from a strap-on cushion to a steel column guard
Safe working load (SWL) signs at $30.58–$49 each, with the count and where each one goes
New beams at $27–$120 each and wire mesh decks at $36.70–$45 each, with the racking maker named so the parts match the system
A single GST basis across every line, delivery shown on its own line, and the supplier's or inspector's ABN and insurance
Pallet racking cost in Townsville: Bohle, Garbutt and Stuart bays, freight and inspections
Pallet racking cost in Townsville is $342.54–$417 per starter bay (typically $350) and $218–$630 per add-on bay (typically $251), both supply only, or $2,000–$10,000 per job for a small-to-medium fit-out of up to about 20 bays (typically $5,000). Freight to Townsville sits outside the supply-only rows.
Parts and inspection complete a Townsville quote: upright protectors at $22–$73.70 each, safe working load (SWL) signs at $30.58–$49 each, new beams at $27–$120 each and wire mesh decks at $36.70–$45 each, with an inspection at $250–$695 for a Mount St John or Stuart unit and $795–$2,000 for a Bohle or Garbutt shed past 1,000 pallet positions.
SafeWork SA lists the current steel storage racking standards as AS 4084.1:2023, Steel storage racking: Design, and AS 4084.2:2023, Steel storage racking: Operation and maintenance. SafeWork NSW's pallet racking guide says formal inspections shall be conducted by a competent person, at intervals not exceeding 12 months, and WorkSafe Victoria says a competent person should complete a formal inspection of pallet racking every 12 months. On parts and signs, SafeWork NSW says replacement components should be parts from the equipment manufacturer, with an engineering report to confirm compatibility if alternative parts must be used, and WorkSafe Victoria asks that bays display the SWL signs provided by the designer. Ask a Townsville inspector which guidance and standard the report follows, and whether travel from the south is in the quoted price.
Pallet racking cost by bay count and site size in Townsville
Quick answerIn Townsville: a Castletown stockroom is a starter bay at $342.54–$417 and a few add-ons at $218–$630, a Stuart transport yard's new shed a fit-out at $2,000–$10,000 per job, and a Garbutt wholesaler past 1,000 pallet positions an inspection at $795–$2,000.
A Townsville run is one starter bay at $342.54–$417 and add-ons at $218–$630 each, so a Bohle depot lengthening an aisle orders add-ons only. A shed fitted as one job of up to about 20 bays prices toward $2,000 for a short run and toward $10,000 nearer 20 bays.
The inspection steps at about 1,000 pallet positions: $250–$695 below (typically $495), $795–$2,000 above (typically $1,500). The parts are priced each: guards at $22–$73.70, beams at $27–$120, signs at $30.58–$49 and decks at $36.70–$45.
Frequently Asked Questions — Pallet Racking Cost in Townsville
What is the price of pallet racking in Townsville?
From our Townsville table: $342.54–$417 per starter bay, supply only (typically $350); $218–$630 per add-on bay (typically $251); $2,000–$10,000 per job for a small-to-medium fit-out of up to about 20 bays (typically $5,000); and $250–$695 for a small-site racking safety inspection (typically $495).
How much does a pallet racking bay cost in Townsville?
A starter bay of two frames plus beams costs $342.54–$417 in Townsville, supply only, with $350 typical, and each add-on bay of one frame plus beams that joins it $218–$630, with $251 typical. Frame height, beam length and the number of beam levels move a bay within its band. A Bohle depot with tall bays and long beams for heavy spares sits toward the top of each band; a Willows stockroom with low bays of boxed stock sits near the bottom, and freight to Townsville is its own line.
What does a small warehouse racking fit-out cost in Townsville?
Going by our Townsville table, a small-to-medium warehouse racking fit-out of up to about 20 bays is $2,000–$10,000 per job, typically $5,000; a shorter run sits toward the low end and a run nearer 20 bays toward the top. Transport and wholesale businesses moving into new Stuart or Garbutt sheds are the usual Townsville fit-out buyers; ask for the bay count and whether freight, assembly and anchoring are in the price.
How much does a pallet racking inspection cost in Townsville?
A racking safety inspection is $250–$695 for a small site of up to about 1,000 pallet positions on our Townsville table, with $495 typical, and $795–$2,000 for a larger site, with $1,500 typical. The price follows the size of the site, and some inspectors include a photo report and risk stickers in it.
How often does pallet racking need to be inspected in Townsville?
SafeWork NSW's pallet racking guide says formal inspections shall be conducted by a competent person, at intervals not exceeding 12 months, and WorkSafe Victoria says a competent person should complete a formal inspection of pallet racking every 12 months. SafeWork SA lists the current steel storage racking standards as AS 4084.1:2023, Steel storage racking: Design, and AS 4084.2:2023, Steel storage racking: Operation and maintenance. In Townsville, book the inspection for the start of a quiet week at the Bohle or Garbutt site, and ask the inspector to tag each damaged part and photograph it in the report.
Do pallet racking repairs need the manufacturer's parts in Townsville?
On parts and signs, SafeWork NSW says replacement components should be parts from the equipment manufacturer, with an engineering report to confirm compatibility if alternative parts must be used, and WorkSafe Victoria asks that bays display the SWL signs provided by the designer. On our Townsville table a new beam is $27–$120 each, supply only, with $57.42 typical, so ask the supplier to name the racking maker on the quote.
What do upright protectors and load signs cost in Townsville?
An upright protector or column guard is $22–$73.70 each on our Townsville table, supply only, with $40.82 typical, from a strap-on cushion at the low end to a steel guard at the top, and a safe working load (SWL) sign $30.58–$49 each, with $40 typical. Bohle depots buy steel guards toward the top of the band for forklift aisles; a Stockland Townsville stockroom worked by trolleys may use strap-on cushions near the bottom.
What do replacement beams and mesh decks cost in Townsville?
A new pallet racking beam is $27–$120 each, supply only, from a short 1,372 mm beam at the low end to a long 3,810 mm one at the top, with $57.42 typical, and a wire mesh deck 838 mm deep $36.70–$45 each, with $39 typical. Mount St John parts units with boxed stock are the usual Townsville mesh deck buyers; ask the supplier to confirm a replacement beam suits the maker of the racking already standing before it is trucked north.
Is installation included in a supply-only pallet racking price in Townsville?
No. The starter bay, add-on bay, protector, sign, beam and mesh deck rows on our Townsville table are supply only, at $342.54–$417 per starter bay, $218–$630 per add-on bay, $22–$73.70 per protector, $30.58–$49 per sign, $27–$120 per beam and $36.70–$45 per deck; delivery, assembly and anchoring are quoted separately. The fit-out row of $2,000–$10,000 per job is the only whole-job price, and its quote should say what it covers. In Townsville, ask for freight to the Bohle or Stuart site, assembly and anchoring as their own lines, so the supply-only parts and the labour can each be checked.