Independent Australian Cost Guides
Updated November 2026

How much does a kitchen renovation cost in Darwin?

Most kitchen renovations in Darwin cost $12,000–$45,000
for a budget to mid-range renovation
A cosmetic refresh in Darwin starts from $8,000. A full budget reno (flat-pack) runs $12,000–$25,000. Mid-range is $25,000–$45,000. Premium with custom cabinetry can reach $80,000+.
+4.2% Kitchen Renovation costs in Darwin are up around 4.2% over the past year, re-verified against 90+ sources in November 2026. Year on year
Platypus mascot illustration — Kitchen Renovation Cost Darwin 2026
Average Kitchen Renovation Cost in Darwin
$35,000
total for a mid-range kitchen renovation
Budget
$12k–$25k
Mid-Range
$25k–$45k
Premium
$45k–$80k
Budget $18,000totalAverage $35,000totalPremium $60,000total

Renovating a kitchen in Darwin runs from $8,000–$20,000 for new door faces and paint, to $12,000–$25,000 for a flat-pack rebuild, $25,000–$45,000 for a mid-range job and $45,000–$80,000 once custom joinery and stone come in. A small galley or U-shape under about 10 m² is $20,000–$35,000 at a mid-range finish. Greater Darwin is a renters' town, with 43.8% of households renting against 30.6% nationally (ABS 2021 Census), so if the kitchen belongs to an investment property, the lower tiers deserve a close look before you commit to a full rebuild. All prices include GST.

Comparing cities, or after the Australia-wide picture? See the national guide: Kitchen renovation cost in Australia.

Quick answerA mid-range kitchen renovation in Darwin costs $25,000–$45,000, typically $35,000. A cosmetic refresh (reface and paint) is $8,000–$20,000. GST included — verified November 2026. Get free Darwin quotes →
Darwin kitchen renovation pricing guide 2026$

Kitchen Renovation Prices in Darwin 2026: Cost Table and Price List

ServiceLowTypicalHigh
Cosmetic refresh (reface + paint)$8,000total$14,000$20,000
Budget renovation (flat-pack)$12,000total$18,000$25,000
Mid-range renovation$25,000total$35,000$45,000
Premium renovation$45,000total$60,000$80,000
Luxury / high-end$70,000total$100,000$150,000
Custom cabinetry (cabinet maker)$12,000total$19,000$35,000
Benchtop — laminate$800total$1,600$2,500
Benchtop — stone$2,500total$4,800$9,000
Splashback (tiled)$400total$800$2,500
Splashback (glass)$800total$1,400$1,800
Plumbing rough-in$1,500total$3,000$5,000
Electrical rough-in$1,500total$2,500$4,000
Flooring (per sqm)$40/sqm$70$120
Demolition & disposal$1,000total$2,000$4,000
Appliance package (oven, cooktop, rangehood, dishwasher)$3,000total$6,000$10,000
Cabinet respray, wrap or resurfacing (doors and panels only)$2,000total$4,500$10,000
Small kitchen renovation (galley or U-shape under ~10 m², mid-range)$20,000total$28,000$35,000
Benchtop — granite (supply + install, per m²)$600/sqm$1,000$1,400
Benchtop — marble (supply + install, per m²)$800/sqm$1,550$2,500
Benchtop — porcelain / sintered stone (supply + install, per m²)$960/sqm$1,250$1,550
Benchtop — timber (supply + install, per m²)$550/sqm$750$1,200
Benchtop — stainless steel (supply + install, per m²)$700/sqm$1,100$1,500
Benchtop — laminate (supply + install, per m²)$300/sqm$440$560
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local installer will be in touch about your job. No spam, no call centre.

Getting quotes for kitchen renovation work in Darwin? Get a quote from a local tradie — free, no obligation.

Get Darwin quotes →
Prices verified November 2026 · Cross-referenced against 90+ Australian trade pricing sources · See methodology

Prices include GST. Based on Darwin metro area, November 2026. Outer suburbs may vary.

Get a fair kitchen renovation quote in Darwin

Local tradies · Free quotes. No obligation, no spam.

Get Quotes in Darwin →Max 2 tradies will contact you
Kitchen renovation vs kitchen remodel — same thing In Australia we say "kitchen renovation" — in the US and on many search engines, "kitchen remodel" means the same thing. Whether you're searching for kitchen remodel cost, kitchen remodel price, or average kitchen remodel cost, this guide covers it all. The costs, process, and tradeoffs are identical regardless of which term you use.

A Darwin kitchen quote, line by line

Adding up the lines of a Darwin kitchen

Seven of the lines our Darwin table prices on their own, at their typical prices: demolition and disposal $2,000, custom cabinetry $19,000, a stone benchtop $4,800, a tiled splashback $800, the plumbing rough-in $3,000, the electrical rough-in $2,500 and an appliance package $6,000. Together they come to $38,100; the table's mid-range renovation is $25,000–$45,000.

These answers use the prices in the table on this page.

Factors affecting kitchen renovation cost in Darwin

What Affects Kitchen Renovation Costs in Darwin

Refresh before you rebuild

If the carcasses are sound, new door and panel faces by respray, wrap or resurfacing cost $2,000–$10,000, a fraction of a new run from a cabinet maker at $12,000–$35,000. Check the old cabinets around the sink and dishwasher for swelling first: particleboard that has soaked up water in a humid climate is not worth refacing.

Benchtops after engineered stone

Tops are priced per square metre. Laminate is the cheapest at $300–$560, then timber at $550–$1,200, granite $600–$1,400, porcelain or sintered stone $960–$1,550 and marble $800–$2,500. NT WorkSafe enforces the engineered stone ban, so a stone quote now means one of these. Timber needs oiling and moves with the humidity.

Moving the sink, cooktop or a wall

Keeping water, waste and power where they are is the biggest saving on offer. Shift the sink and the plumbing rough-in is $1,500–$5,000; move the cooktop or add circuits and the electrical rough-in is $1,500–$4,000. Knocking out a wall to open the kitchen up is an alteration, and the NT permit table lists alterations to an existing house as needing a building permit even when the floor area stays the same.

Registered builder and deposit rules

In the Territory, a renovation inside the existing walls is not prescribed building work. It becomes prescribed when the job adds floor area and is worth more than $25,000, as a kitchen extension at mid-range prices ($35,000 typical) would be. Then you need a registered building contractor and a fidelity fund certificate, and the builder cannot ask for a deposit of more than 5% of the contract price.

Asbestos and old benchtops

NT guidance is to assume suspect material installed before the national asbestos ban contains asbestos, which can include fibre-cement sheeting behind an old splashback. You may remove less than 10 m² of non-friable asbestos without a licence, though the NT Government advises a licensed removalist. Ordinary demolition and disposal is $1,000–$4,000; asbestos and engineered stone both need a City of Darwin application and written approval before going to Shoal Bay.

Working around the wet season

Darwin Airport averages 432.1 mm of rain in January and 372.2 mm in February (BOM averages), and the cyclone season runs from November to April. Cabinets and tops are made off-site, but demolition skips, deliveries and the benchtop templater all need clear access, so many owners plan the install for the dry months from May to September. Order custom joinery early, as it can take several weeks to make.

Appliances and splashbacks

An oven, cooktop, rangehood and dishwasher package costs $3,000–$10,000. With daytime tops above 30 °C in all twelve months (BOM averages), a rangehood ducted outside, which removes heat and steam instead of recirculating them, is worth the extra ducting. Splashbacks are $400–$2,500 tiled or $800–$1,800 in glass, and new flooring adds $40–$120 a square metre.

How to Save Money on Kitchen Renovation Cost in Darwin

1
Give every Darwin kitchen renovator the same written scope, listing cabinetry, benchtop, appliances and trades, so the totals compare like for like.
2
If the kitchen is in a rental, price a respray or wrap of the existing doors before committing to new cabinets.
3
Ask for moisture-resistant board under the sink and around the dishwasher, because standard particleboard swells once water gets into it.
4
Have any suspect sheeting or old vinyl sampled before the strip-out if the house predates the national asbestos ban.
5
Even on a job below the prescribed line, get a written contract; the NT Government notes one can help if you need to review the builder's work later.
6
Use the cyclone months for design, showroom visits and ordering, and let the demolition start once the dry season has set in.

Kitchen Renovation Cost in Darwin by Kitchen Size

Quick answerA Darwin galley or U-shape of about 10 square metres or less, finished to mid-range, is $20,000–$35,000 on the small-kitchen row, against $25,000–$45,000 for a full mid-range job. Bench and floor are priced by area.

Measure the bench before reading a materials row. A stainless steel bench of 4 square metres at $700–$1,500 a square metre comes to $2,800–$6,000, and a longer run scales by the same working. The whole-job rows follow the footprint, so say how many square metres the room covers.

A Casuarina or Nightcliff kitchen that keeps its footprint reads against the small or the mid-range row, while an extension that adds floor area is a different job to price. A rental kitchen may need only a respray, which has its own row at $2,000–$10,000.

Kitchen Renovation Cost in Darwin: What the Quote Should Include

A Darwin kitchen has to cope with humidity, and a quote can show whether it was priced for that. In a Nightcliff or Palmerston kitchen, the board behind the sink, the benchtop finish and the hardware deserve lines of their own, not a general description of the cabinets.

Frequently Asked Questions — Kitchen Renovation Cost in Darwin

How much does a kitchen renovation cost in Darwin?
By tier in our Darwin table: a cosmetic refresh (reface and paint) is $8,000–$20,000, a budget flat-pack renovation $12,000–$25,000, mid-range $25,000–$45,000, premium $45,000–$80,000 and luxury or high-end $70,000–$150,000.
What would a timber benchtop cost per square metre in Darwin?
Timber benchtops are priced at $550–$1,200 a square metre in Darwin, supply and installation included. A 3 square metre run therefore comes to $1,650–$3,600. Edge profile, thickness and the cut-outs for the sink and cooktop move a quote within the row, so ask for the timber type and the benchtop length to be written on the quote.
What do kitchen renovators charge for a cosmetic kitchen refresh (reface and paint) in Darwin?
For a cosmetic kitchen refresh (reface and paint), our Darwin table shows $8,000–$20,000, with a typical price of $14,000.
What is the price of the electrical rough-in for a kitchen in Darwin?
Going by our Darwin table, expect $1,500–$4,000 for the electrical rough-in for a kitchen; the typical price is $2,500.
What is the price of a kitchen appliance package in Darwin?
Going by our Darwin table, expect $3,000–$10,000 for a kitchen appliance package; the typical price is $6,000.
What is the price of the plumbing rough-in for a kitchen in Darwin?
Going by our Darwin table, expect $1,500–$5,000 for the plumbing rough-in for a kitchen; the typical price is $3,000.
How much does a cabinet maker charge for custom cabinetry in a Darwin kitchen?
Custom cabinetry from a cabinet maker is $12,000–$35,000 in Darwin, with $19,000 typical. Cabinet runs are drawn to the room, so the number of cabinets, the door style and the hardware chosen set where a Fannie Bay or Stuart Park kitchen falls inside the row. Ask the quote to list the cabinet count, the board and the finish.
What do stripping out the old kitchen and laying a ten square metre floor cost in Darwin?
Demolition and disposal is $1,000–$4,000 in Darwin and flooring is $40–$120 a square metre. For a 10 square metre Nightcliff kitchen the floor alone comes to $400–$1,200, which together with the strip-out gives $1,400–$5,200. Ask whether tip fees and removal of the old floor covering sit inside the demolition line or are charged on top.
How is a laminate benchtop priced in Darwin, by the job or by the square metre?
Both ways appear in the rows. A laminate benchtop priced for the job is $800–$2,500 in Darwin, while supply and installation by area is $300–$560 a square metre. A 4 square metre bench at the area rate comes to $1,200–$2,240. Ask the quote which basis it uses, and whether the sink and cooktop cut-outs are included.

Our Methodology

These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed November 2026. Read our full methodology →

Related Guides

Advertise with us

Reach thousands of Australian homeowners researching trade costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage