TV wall mounting cost in Brisbane
Most Brisbane TV mounting quotes land between $100 and $250. What moves you inside that band is almost never the TV — it is what is behind the plasterboard.
The base job
A straightforward mount — fixed bracket, plasterboard wall, timber studs where you want the TV — runs $100–$250 in Brisbane, with most jobs landing near the middle of that. That covers locating studs, fixing the bracket, hanging the set, levelling it and tidying the visible cabling.
Bracket type moves the number. A fixed flat mount is the quickest. A tilt bracket adds a little. A full-motion articulating arm takes longer to fit and needs more secure fixing because of the leverage, and sits at the upper end.
What the wall does to the price
Substrate is the real variable in Brisbane, and it varies enormously by suburb and housing stock.
| Wall type | Effect on cost | Why |
|---|---|---|
| Plasterboard with timber studs | Base rate | Standard fixing, quick |
| Plasterboard, no stud where wanted | +$40–$90 | Needs a spanning bracket or blocking |
| Brick or blockwork | +$50–$100 | Masonry anchors, slower drilling, more dust |
| Queenslander VJ over hardwood | +$60–$120 | Old hardwood is dense; pilot holes essential, VJ boards split easily |
| Fibro or asbestos-era sheeting | Stop — assess first | Pre-1990 sheeting may contain asbestos; not a handyman job |
That last row matters in Brisbane more than in newer cities. If the wall is original fibro sheeting in a pre-1990 home, drilling it is not a job to improvise on — it needs assessing before anyone puts a bit through it.
Cable concealment
This is the line item people do not budget for. Running cables inside the wall cavity, rather than in a surface conduit, typically adds $100–$250 depending on the drop and whether a new power outlet is needed behind the screen.
Worth being explicit about what that does to the total: the $100–$250 band quoted on the main guide is the mount itself. Concealment is a second, separate piece of work, so a mount-plus-concealment job lands above that band rather than inside it. It is not a quote that has crept — it is two jobs.
Worth being clear: a handyman can run HDMI and low-voltage cable through a cavity. Installing a new power point behind the TV is electrical work, and in Queensland that requires a licensed electrician at any value. A common arrangement is the handyman doing the mount and cavity run, with an electrician fitting the outlet.
Screen size and other extras
Sets above about 65 inches usually add $50 or so, largely because they are a genuine two-person lift. Removing and disposing of an old wall unit, soundbar mounting, or reconnecting a tangle of existing devices are all separately chargeable and worth mentioning when you book rather than on the day.
Frequently asked questions
How much does it cost to mount a TV on the wall in Brisbane?
Typically $100–$250 for a standard job on plasterboard with a fixed or tilt bracket. Brick, masonry and Queenslander hardwood walls add $50–$120, and in-wall cable concealment adds $100–$250 on top.
Can a handyman install a power point behind the TV?
No. Installing a new power outlet is electrical work and in Queensland requires a licensed electrician regardless of the value. A handyman can run HDMI and low-voltage cabling through the wall cavity.
Is mounting a TV on a Queenslander wall more expensive?
Usually. VJ boards over old-growth hardwood studs need pilot holes throughout, the boards split if rushed, and the framing does not always sit where a modern stud finder expects. Budget $60–$120 above a standard plasterboard mount.
What if there is no stud where I want the TV?
A spanning bracket across two studs or added blocking inside the cavity solves it, adding roughly $40–$90. Fixing a TV to plasterboard without structural backing is not safe at any screen size.
Does the price include hiding the cables?
Rarely. Base quotes usually cover tidying visible cable only. Running cables inside the wall is a separate line, typically $100–$250.
← Back to Brisbane handyman cost hub