Aluminium Slat Fencing & Gates Cost Geelong (2026)

By the WTD team · Updated October 2026

Aluminium slat fencing in Geelong is priced per metre on height, blade spacing and finish, with timber-look premium blades at the top of the range. Add gates - especially automated driveway gates - and slat work carries the biggest single tickets in residential fencing. Here is what moves the price in 2026.

Quick answer: slat fencing prices in Geelong

Aluminium slat is a premium front-boundary product, priced per metre on height, blade spacing and finish, so get it quoted to your exact spec. For comparison, Colorbond costs $74-$175 per metre and a picket front fence $56-$230 per metre installed in Geelong. Powder-coat colour blades are the cheaper slat finish; timber-look woodgrain finishes cost more. Front-boundary feature runs with letterbox and intercom integration price toward the top, and short runs attract a minimum job charge regardless of metres.

What moves the per-metre price

Four levers do most of the work: height (1.2m front fences vs 1.8-2.1m privacy runs), blade spacing (tighter gaps mean more blades per metre - full-privacy spacing adds 10-20% over standard), finish (solid powder-coat vs timber-look), and footings (core-drilled into existing concrete vs new post holes in garden beds). Sloping Highton and Wandana Heights blocks add stepping or raking; both cost more than a flat run.

Slat vs Colorbond

Colorbond wins on price for full-privacy boundary work; slat wins the street. Most Geelong slat jobs are front fences and feature screens where the open-blade look matters, with Colorbond doing the side and rear boundaries on the same property. If the whole perimeter is budget-driven, start with the Colorbond guide and come back for the front.

Gates: where the real money is

Pedestrian gates

A single pedestrian gate costs $230-$605 installed in Geelong ($465 typical). A matching slat gate, soft-close hardware and keypad latches push the price toward the top of that band.

Driveway gates - swing and sliding

A double or driveway gate costs $745-$2,325 installed in Geelong ($1,125 typical); slat infill and a sliding track add to that. Sliding suits Geelong's shorter new-estate driveways in Armstrong Creek and Charlemont where swing clearance does not exist.

Automated gates

Automation is the biggest ticket in residential fencing: a motorised sliding slat gate is quoted as a package covering the gate, track, motor, safety beams and remotes, with solar kits and intercom integration extra. Get the electrical scope in writing - who runs power to the motor is the classic quote gap.

Coastal spec on the Bellarine and Surf Coast

Salt air is not a marketing line - within a few kilometres of the water at Ocean Grove, Barwon Heads and Torquay, ask for marine-grade powder coating and stainless fixings. The premium is modest ~5-15%; the corrosion difference over a decade is not.

Front fence rules, briefly

Victoria's Building Regulations, rather than the council, set front-fence height limits in residential streets - around the 1.2-1.5m mark (1.2m for masonry or concrete, 1.5m for other materials) before a building permit is needed, with corner-block sightline rules on top. Your installer deals with this weekly; confirm the height plan before ordering blades, because re-cutting is dead money.

One cost trap on any dividing fence: under Victoria’s Fences Act, if you choose a fence of a greater standard than a sufficient dividing fence, you are liable for the entire cost so far as it exceeds that standard. On a premium slat dividing fence that gap is the single most common bill-shock, so raise the material choice with your neighbour before you order blades.

Getting comparable quotes

Specify metres by height, blade spacing (or "full privacy"), finish, footing situation, gate count and automation scope. Slat quotes vary more than any other fence type because the spec varies more - two quotes are only comparable when those six items match. For the whole-property picture across every fence type, head back to the full Geelong fencing cost guide.

Frequently asked questions

How much is aluminium slat fencing per metre in Geelong?

It depends on height, blade spacing and finish, so get it quoted to your spec: timber-look finishes cost more than solid powder-coat colours, and full-privacy blade spacing adds to the price. For comparison, Colorbond costs $74-$175 per metre installed in Geelong.

What does an automatic sliding gate cost in Geelong?

A motorised sliding slat gate is quoted as a package including track, motor, safety beams and remotes - with power supply to the motor the item to pin down in writing. Before automation and slat infill, a double or driveway gate costs $745-$2,325 installed in Geelong.

Is slat fencing more expensive than Colorbond?

Per metre, yes - slat is a premium front-boundary and feature product, while Colorbond is usually the value pick for full-privacy side and rear boundaries. Many Geelong properties run both.

Does coastal Geelong need a different slat spec?

Close to the water on the Bellarine and Surf Coast, marine-grade powder coating and stainless fixings are worth the modest premium - standard coatings age visibly faster in salt air.

How high can a front fence be in Geelong?

Residential front fences commonly sit around 1.2-1.5m before permit requirements enter the picture, with extra sightline rules on corner blocks - your installer will confirm against the current Greater Geelong rules for your street.