Updated November 2026·Independently researched·10 min read
Test and tag in Hobart runs $3.50–$9.50 per item
for a job of 1 to 50 items, as published by testers (most ex GST) - larger jobs, minimum charges, RCD and exit light tests below
A Salamanca Place restaurant kitchen with its fridges, mixers, a microwave and a drawer of leads is counted per item at $3.50–$9.50, typically $5.50, but usually ends up paying the minimum site charge of $89–$250 because the count is short. A Derwent Park engineering shop with hundreds of tools is quoted at $2.10–$4.95 per item.
+4.7%Test and Tag costs in Hobart are up around 4.7% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical per-item rate in Hobart, 1-50 items
$5.50
per item tested and tagged, Hobart 2026, as published
Test and tag, 1-50 items
$3.50-$9.50
Test and tag, 51-200 items
$3.20-$6
Test and tag, 200+ items
$2.10-$4.95
$3.50$5.50$9.50
Hobart testers quote per item and step the rate down with volume: $3.50–$9.50 per item for 1 to 50 items, $3.20–$6 for 51 to 200 and $2.10–$4.95 per item for 200 or more, with a minimum site charge of $89–$250 under all of it. For a Battery Point guesthouse or a Sandy Bay Road shop the minimum is the real price, so the first question for any Hobart quote is how many items it covers before the per-item rate kicks in.
The second question is what else is on the walls. Exit and emergency lights across a Macquarie Street office floor are $7–$20 per fitting, the fixed safety switch on the board $5–$20 per unit and portable ones on the cleaning trolley $5.49–$12, the tearoom microwave $5–$30 per unit, and extension leads and power boards $2–$8 per item each. In a Moonah or Cambridge workshop the three-phase saws and compressors are their own line at $4–$9.50 per item.
Repairs and uncounted sites round out a Hobart quote: a plug top replaced on the spot at $15–$55 per item instead of a tool tagged out for a week, a fire extinguisher or blanket inspected on the same visit at $10–$35 per unit, and an hourly rate of $60–$150 for a Brighton depot or a Kingston school where nobody has a count yet. After-hours access to an Eastlands or Northgate tenancy is priced as a line of its own.
Quick answerTest and tag in Hobart runs $3.50–$9.50 per item for a job of 1 to 50 items in 2026, $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, with a minimum site charge of $89–$250 where the item count is small. Fixed RCD tests add $5–$20 per unit and emergency and exit light tests $7–$20 per fitting. Prices are as published by testers, most of them ex GST. Get free Hobart quotes →
Test and Tag Prices in Hobart 2026: Cost Table and Price List
Service
Low
Typical
High
Test and tag, 1-50 items
$3.50per item
$5.50
$9.50
Test and tag, 51-200 items
$3.20per item
$4.50
$6
Test and tag, 200+ items
$2.10per item
$3.50
$4.95
Minimum site charge or call-out
$89per visit
$125
$250
Fixed RCD test, push-button and trip time
$5per unit
$15
$20
Portable RCD test
$5.49per unit
$9.50
$12
Emergency and exit light test, six-monthly
$7per fitting
$12
$20
Microwave leakage test
$5per unit
$15
$30
Three-phase equipment test
$4per item
$8
$9.50
Fire extinguisher or fire blanket inspection, with a test-and-tag visit
$10per unit
$15
$35
Hourly rate, unknown item count or complex site
$60per hour
$90
$150
Extension lead or power board test
$2per item
$5
$8
Plug top replaced on site
$15per item
$25
$55
Scoping test and tag work in Hobart? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Greater Hobart, November 2026.
What does test and tag cost per item in Hobart?$3.50–$9.50 per item for a small job of 1 to 50 items, $5.50 typical. The rate steps down with volume: $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, and most testers apply a minimum site charge of $89–$250.
What gets added to a Hobart test and tag quote?Fixed RCD push-button and trip-time tests at $5–$20 per unit, portable RCDs at $5.49–$12 per unit, emergency and exit lights at $7–$20 per fitting, microwave leakage tests at $5–$30 per unit, three-phase equipment at $4–$9.50 per item, and a plug top replaced on the spot at $15–$55 per item.
Worked Test and Tag Cost Scenarios — Hobart
Hobart examples priced from this page's rows: a Salamanca Place restaurant, a Collins Street accounting firm and a Derwent Park engineering workshop. Each line names the row it draws on; the quote you receive prices your own item count and access.
Salamanca Place restaurant. A restaurant in a Salamanca Place warehouse has a kitchen of fridges, mixers, a microwave, induction units and leads that comes in under the minimum site charge, so the visit is priced at $89–$250 ($125 typical) with the microwave leakage test at $5–$30 per unit, the fire blanket and two extinguishers inspected at $10–$35 per unit, the fixed safety switch at $5–$20 and the exit lights over the dining room doors at $7–$20 per fitting.
Collins Street accounting firm. An accounting firm on Collins Street counts laptops, chargers, monitors, printers and a tearoom into the 51 to 200 band at $3.20–$6 per item, typically $4.50, adds every desk power board at $2–$8 per item, has a portable safety switch on the cleaner's vacuum tested at $5.49–$12 per unit, and books the visit after close so the floor is not interrupted, with that access on its own line.
Derwent Park engineering workshop. A fabrication shop in Derwent Park with grinders, drills, welders, battery chargers and three-phase machines runs past 200 items and is quoted at $2.10–$4.95 per item ($3.50 typical), with the three-phase plant on its own line at $4–$9.50 per item and a handful of damaged plug tops replaced on the spot at $15–$55 each so the tools go back on the bench the same day.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping test and tag work in Hobart? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Greater Hobart, November 2026.
Test and Tag Costs by Sector in Hobart
Hobart's test and tag work spans the office streets of Macquarie Street, Collins Street and Glenorchy, the kitchens of Salamanca, Battery Point and the waterfront, the retail strips of Elizabeth Street North Hobart, Sandy Bay Road and Channel Highway Kingston, the centres at Eastlands, Northgate and Centrepoint, and the workshops of Derwent Park, Moonah, Cambridge and Brighton.
Professional offices: Macquarie Street, Collins Street, Glenorchy - A floor of laptops, monitors and chargers sits in the $3.20–$6 per-item band, every power board is counted at $2–$8 per item, the exit and emergency lights at $7–$20 per fitting and the board's safety switch at $5–$20 per unit, with after-hours access priced rather than absorbed.
Restaurants, bars and hotels: Salamanca, Battery Point, the waterfront - Kitchens pay the minimum site charge of $89–$250 where the count is short, plus a microwave leakage test at $5–$30 per unit and a fire extinguisher or blanket inspection at $10–$35 per unit on the same visit; a hotel with rooms of kettles and hairdryers climbs into the $2.10–$4.95 band quickly.
Engineering and transport: Derwent Park, Moonah, Cambridge, Brighton - Three-phase welders, lathes and compressors at $4–$9.50 per item, portable safety switches on the extension reels at $5.49–$12 per unit and plug tops replaced on the spot at $15–$55 each, with the hand tools counted into the $2.10–$4.95 band past 200 items.
Shops and centres: Elizabeth Street North Hobart, Sandy Bay Road, Eastlands, Northgate - A single shop's point-of-sale, lighting and back-room appliances sit in the $3.50–$9.50 band or on the minimum site charge, and a centre tenancy's trading hours decide whether the visit is before opening, after close or priced hourly at $60–$150 for a spread of shops done in one night.
Schools, aged care and hire yards: Kingston, Glenorchy, Brighton - Spread-out campuses and depots nobody has counted are quoted at $60–$150 per hour for the first visit, after which the register left behind lets the next visit be priced per item at $3.20–$6 or $2.10–$4.95; hire gear going out the gate is tested and tagged on a cycle the quote should name.
What a Compliant Test and Tag Quote Includes — Cost in Hobart
Before comparing Hobart quotes, check each one prices the same item count in the same band, says whether the minimum site charge covers a stated number of items, and lists RCDs, exit lights, microwaves and three-phase equipment on their own lines with the GST basis stated.
The per-item rate and the band it sits in - 1 to 50, 51 to 200 or 200 or more items - at $3.50–$9.50, $3.20–$6 or $2.10–$4.95 per item
The minimum site charge at $89–$250 and exactly how many items it covers before the per-item rate starts
Fixed RCD push-button and trip-time tests at $5–$20 per unit and portable RCDs at $5.49–$12 per unit, counted separately from appliances
Emergency and exit light tests at $7–$20 per fitting, with the six-monthly discharge test named
Microwave leakage tests at $5–$30 per unit and three-phase equipment at $4–$9.50 per item as their own lines
Fire extinguisher and fire blanket inspections at $10–$35 per unit where bundled with the visit, and who services them otherwise
Extension leads and power boards at $2–$8 per item, and the on-site repair basis - a plug top replaced at $15–$55 per item
The tester's competency - a nationally accredited portable appliance testing course or an electrical licence - and the register and report included
A single GST basis across every line, with the retest interval the quote assumes and the tester's ABN and insurance
Test and tag cost in Hobart: kitchens, offices and the industrial north
Test and tag cost in Hobart begins with the count. Up to 50 items the rate is $3.50–$9.50 per item, typically $5.50, 51 to 200 items $3.20–$6 and 200 or more $2.10–$4.95, with a minimum site charge of $89–$250 that a Battery Point guesthouse or a North Hobart cafe usually pays instead of the per-item line. What the rate buys is the same in Salamanca as in Brighton: the inspection, the test, the tag and the register that is left behind.
Everything else is added by type. Fixed safety switches at $5–$20 per unit and portable ones at $5.49–$12, emergency and exit lights at $7–$20 per fitting, microwaves at $5–$30 per unit, three-phase machines at $4–$9.50 per item and extension leads or power boards at $2–$8 each are all their own lines on a Hobart quote. So are a plug top replaced on site at $15–$55 per item, a fire extinguisher or blanket inspection at $10–$35 per unit while the tester is there, and the hourly rate of $60–$150 that a Cambridge airport-precinct warehouse or a Kingston school pays until its first register exists.
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, was published on 29 June 2022 as a complete revision superseding AS/NZS 3760:2010, and Standards Australia describes its interval recommendations as based on equipment type, environment and usage; AS/NZS 2293.2:2019 is the routine service and maintenance part of the emergency lighting and exit sign standard. For a Hobart quote, ask the tester to show the course or licence they test under and to describe the register and report they leave, since the next tester will price from that register.
Test and tag cost by item count and site type in Hobart
Quick answerHobart pricing steps by count: a Salamanca or Battery Point kitchen sits on the $89–$250 minimum charge, a Macquarie Street or Collins Street office floor in the $3.20–$6 band, and a Derwent Park or Moonah workshop past 200 items at $2.10–$4.95 per item with three-phase plant at $4–$9.50 on its own line.
Item count moves a Hobart price first. A Sandy Bay Road shop with a till, a fridge and a few leads is priced at $3.50–$9.50 per item but pays the minimum site charge of $89–$250; a Glenorchy office with its power boards counted at $2–$8 per item reaches the 51 to 200 band at $3.20–$6; a Brighton transport depot or a waterfront hotel with rooms of appliances passes 200 items and drops to $2.10–$4.95 per item.
Site type moves it second. Workshops in Moonah and Derwent Park add three-phase equipment at $4–$9.50 per item, portable safety switches at $5.49–$12 per unit and plug tops replaced on the spot at $15–$55 each; offices on Macquarie Street add exit lights at $7–$20 per fitting and the board's fixed safety switch at $5–$20; kitchens on the waterfront add a microwave at $5–$30 per unit and extinguishers at $10–$35 per unit; and a Kingston campus with no register is quoted at $60–$150 per hour until it has one.
Frequently Asked Questions — Test and Tag Cost in Hobart
What is the price of test and tag in Hobart?
From our Hobart table: $3.50–$9.50 per item for 1 to 50 items (typically $5.50); $3.20–$6 per item for 51 to 200 items (typically $4.50); $2.10–$4.95 per item for 200 or more (typically $3.50); minimum site charge $89–$250.
How much does test and tag cost per item in Hobart?
A small job of 1 to 50 items costs $3.50–$9.50 per item in Hobart, with $5.50 typical, and the rate steps down to $3.20–$6 for 51 to 200 items and $2.10–$4.95 for 200 or more. A Moonah workshop that counts its reels and power boards at $2–$8 per item often lands a band lower than its owner guessed, so ask the Hobart tester to state the band on the quote rather than the per-item rate alone.
What is the minimum charge for test and tag in Hobart?
Going by our Hobart table, the minimum site charge or call-out is $89–$250, typically $125, and it usually covers a stated number of items before the per-item rate applies. Salamanca, Battery Point and North Hobart venues are the usual Hobart buyers at the minimum; ask whether the microwave at $5–$30 per unit and the extinguishers at $10–$35 per unit are inside it or added on top.
How much does RCD testing cost in Hobart?
A fixed RCD push-button and trip-time test is $5–$20 per unit on our Hobart table, with $15 typical, and a portable RCD test $5.49–$12 per unit; both are counted separately from the appliances plugged into them.
How often does equipment need to be tested and tagged in Hobart?
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. A Hobart tester should write the retest cycle the quote assumes for your type of site on the quote and in the register, because a Derwent Park workshop, a Collins Street office and a Salamanca kitchen are not on the same one; without that register the next visit is priced at $60–$150 per hour.
Who is allowed to test and tag in Hobart?
AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, was published on 29 June 2022 as a complete revision superseding AS/NZS 3760:2010, and Standards Australia describes its interval recommendations as based on equipment type, environment and usage; AS/NZS 2293.2:2019 is the routine service and maintenance part of the emergency lighting and exit sign standard. On our Hobart table an hourly rate of $60–$150 applies where the item count is unknown or the site is complex, with $90 typical.
What do emergency and exit light tests cost in Hobart?
Emergency and exit light tests cost $7–$20 per fitting in Hobart on a six-monthly cycle, with $12 typical, and most testers quote them alongside the appliance visit. Office floors on Macquarie Street and Collins Street and the hotels along the waterfront are the usual Hobart buyers; ask for the fitting count the price is built on and whether a failed fitting is reported or replaced on the day.
Does test and tag cover microwaves, three-phase equipment and fire extinguishers in Hobart?
A microwave leakage test is $5–$30 per unit, three-phase equipment $4–$9.50 per item and a fire extinguisher or fire blanket inspection bundled with the visit $10–$35 per unit on our Hobart table. Derwent Park, Moonah and Cambridge workshops carry the three-phase lines and Salamanca kitchens the microwaves; for a venue with one or two extinguishers, the bundled inspection at $10–$35 per unit saves a separate fire contractor's call-out.
What does a failed item cost to fix during a Hobart test and tag visit?
A plug top replaced on site costs $15–$55 per item on our Hobart table, with $25 typical, and an extension lead or power board test $2–$8 per item. AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, was published on 29 June 2022 as a complete revision superseding AS/NZS 3760:2010, and Standards Australia describes its interval recommendations as based on equipment type, environment and usage; AS/NZS 2293.2:2019 is the routine service and maintenance part of the emergency lighting and exit sign standard. On a Hobart visit agree before the tester starts whether a failed tool is repaired at $15–$55 per item, retested at the per-item rate or tagged out, and ask for the failed items listed in the report.