Updated November 2026·Independently researched·10 min read
Test and tag in Gold Coast runs $3.50–$9.50 per item
for a job of 1 to 50 items, as published by testers (most ex GST) - larger jobs, minimum charges, RCD and exit light tests below
A Bundall agency with a small count of laptops, screens and a kitchenette is quoted $3.50–$9.50 per item, $5.50 typical, and usually the minimum site charge of $89–$250 rather than the per-item sum. A Yatala food manufacturer with mixers, conveyors, chargers and leads across the plant prices at $2.10–$4.95 per item once the count passes 200.
+4.9%Test and Tag costs in Gold Coast are up around 4.9% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical per-item rate in Gold Coast, 1-50 items
$5.50
per item tested and tagged, Gold Coast 2026, as published
Test and tag, 1-50 items
$3.50-$9.50
Test and tag, 51-200 items
$3.20-$6
Test and tag, 200+ items
$2.10-$4.95
$3.50$5.50$9.50
On the Gold Coast, test and tag is priced per item with volume breaks: $3.50–$9.50 per item for a job of 1 to 50 items, $3.20–$6 per item for 51 to 200 and $2.10–$4.95 per item for 200 or more. When the count is small the minimum site charge of $89–$250 applies instead, which is what a James Street Burleigh Heads cafe or a Griffith Street Coolangatta shop actually pays.
Two Gold Coast quotes for the same premises differ on access and on what is counted beside the appliances. A Surfers Paradise or Broadbeach tower floor is an after-hours booking with a dock slot; a business spread across Robina, Varsity Lakes and Southport is three visits with three minimums. Fixed safety switches are priced at $5–$20 per unit, portable RCDs at $5.49–$12 per unit and emergency and exit lights at $7–$20 per fitting, counted apart from the appliance tally and shown on their own lines.
The remaining lines come with the kind of site: microwave leakage tests at $5–$30 per unit in a Broadbeach or Burleigh kitchen, three-phase equipment at $4–$9.50 per item in a Molendinar or Arundel factory, fire extinguisher or fire blanket inspections at $10–$35 per unit bundled with the visit, extension leads and power boards at $2–$8 per item, and a plug top replaced on the spot at $15–$55 per item. A Yatala site nobody has counted is quoted at the hourly rate of $60–$150.
Quick answerTest and tag in Gold Coast runs $3.50–$9.50 per item for a job of 1 to 50 items in 2026, $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, with a minimum site charge of $89–$250 where the item count is small. Fixed RCD tests add $5–$20 per unit and emergency and exit light tests $7–$20 per fitting. Prices are as published by testers, most of them ex GST. Get free Gold Coast quotes →
Test and Tag Prices in Gold Coast 2026: Cost Table and Price List
Service
Low
Typical
High
Test and tag, 1-50 items
$3.50per item
$5.50
$9.50
Test and tag, 51-200 items
$3.20per item
$4.50
$6
Test and tag, 200+ items
$2.10per item
$3.50
$4.95
Minimum site charge or call-out
$89per visit
$125
$250
Fixed RCD test, push-button and trip time
$5per unit
$15
$20
Portable RCD test
$5.49per unit
$9.50
$12
Emergency and exit light test, six-monthly
$7per fitting
$12
$20
Microwave leakage test
$5per unit
$15
$30
Three-phase equipment test
$4per item
$8
$9.50
Fire extinguisher or fire blanket inspection, with a test-and-tag visit
$10per unit
$15
$35
Hourly rate, unknown item count or complex site
$60per hour
$90
$150
Extension lead or power board test
$2per item
$5
$8
Plug top replaced on site
$15per item
$25
$55
Scoping test and tag work in Gold Coast? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Gold Coast from Coolangatta to Yatala, November 2026.
What does test and tag cost per item in Gold Coast?$3.50–$9.50 per item for a small job of 1 to 50 items, $5.50 typical. The rate steps down with volume: $3.20–$6 per item for 51 to 200 items and $2.10–$4.95 per item for 200 or more, and most testers apply a minimum site charge of $89–$250.
What gets added to a Gold Coast test and tag quote?Fixed RCD push-button and trip-time tests at $5–$20 per unit, portable RCDs at $5.49–$12 per unit, emergency and exit lights at $7–$20 per fitting, microwave leakage tests at $5–$30 per unit, three-phase equipment at $4–$9.50 per item, and a plug top replaced on the spot at $15–$55 per item.
Worked Test and Tag Cost Scenarios — Gold Coast
Three Gold Coast jobs priced from this page's rows: a Bundall marketing agency, a Yatala food manufacturer and a Broadbeach hotel kitchen with function rooms. Each line names the row it draws on; your own quote prices your item count and access.
Bundall marketing agency. A marketing agency on one Bundall floor has laptops, docks, screens, studio lights and kitchen appliances tested at $3.20–$6 per item ($4.50 typical) once the count passes 50, the fixed safety switches on the board at $5–$20 per unit and the emergency and exit lights at $7–$20 per fitting in a single evening visit, with the register emailed to the studio manager and a copy left at the front desk.
Yatala food manufacturer. A food manufacturer in Yatala counts mixers, conveyors, packing machines, chargers, hand tools and leads past 200 items at $2.10–$4.95 per item, with three-phase equipment at $4–$9.50 per item on its own line, extension leads and power boards at $2–$8 per item and the portable RCDs on the wash-down line at $5.49–$12 per unit; plug tops that fail are replaced on the spot at $15–$55 per item so the line is not held up for a return visit.
Broadbeach hotel kitchen and function rooms. A Broadbeach hotel with a kitchen, a bar and two function rooms pays the minimum site charge of $89–$250 ($125 typical) where the count is small rather than the $3.50–$9.50 per-item rate, adds microwave leakage tests at $5–$30 per unit in the kitchen and the function-room pantries, and has its extinguishers and fire blankets inspected at $10–$35 per unit on the same morning visit before the lunch service.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping test and tag work in Gold Coast? Get a quote from a local commercial contractor - free, no obligation.
Prices are as published by testers, most of them ex GST. Gold Coast from Coolangatta to Yatala, November 2026.
Test and Tag Costs by Sector in Gold Coast
Gold Coast test and tag work runs from the Southport, Bundall, Robina and Varsity Lakes offices, through the kitchens of Surfers Paradise, Broadbeach and Burleigh and the strips at Tedder Avenue Main Beach, James Street Burleigh Heads and Griffith Street Coolangatta, to the factories of Yatala, Molendinar, Burleigh and Arundel and the centres at Pacific Fair, Robina Town Centre and Harbour Town.
Southport, Bundall, Robina and Varsity Lakes offices - Laptops, docks, screens and kitchenettes at $3.50–$9.50 or $3.20–$6 per item by count, fixed safety switches at $5–$20 per unit and emergency and exit lights at $7–$20 per fitting on separate lines; the after-hours window and the dock booking are the lines to check on a tower quote.
Yatala, Molendinar, Burleigh and Arundel factories - Sites that pass 200 items at $2.10–$4.95 per item, three-phase equipment at $4–$9.50 per item, portable RCDs at $5.49–$12 per unit, leads and power boards at $2–$8 per item and the on-the-spot plug top at $15–$55 per item; ask for the failed-item list in the register before the tester leaves the gate.
Surfers Paradise, Broadbeach and Burleigh hospitality - Small counts that land on the minimum of $89–$250, microwave leakage tests at $5–$30 per unit and fire extinguisher and fire blanket inspections at $10–$35 per unit on the same visit; the booking is before service, and a group with venues in all three pays a minimum at each.
Tedder Avenue, James Street Burleigh Heads and Griffith Street Coolangatta strips - A single shop sits in the $3.50–$9.50 per-item band or on the minimum of $89–$250; a chain with tenancies at Pacific Fair, Robina Town Centre and Harbour Town is priced as spread-out sites, each with its own minimum, and the quote should name them.
Coast gyms, childcare, schools and cleaning contractors from Coolangatta to Southport - Gyms and schools pass 51 items and price at $3.20–$6 per item; childcare centres and cleaning contractors with equipment that moves between sites often take the hourly rate of $60–$150 where the count cannot be stated, with the register and report the deliverable to insist on.
What a Compliant Test and Tag Quote Includes — Cost in Gold Coast
Before comparing Gold Coast quotes, check each one prices the same item count in the same band, says whether the minimum site charge covers a stated number of items, and lists RCDs, exit lights, microwaves and three-phase equipment on their own lines with the GST basis stated.
The per-item rate and the band it sits in - 1 to 50, 51 to 200 or 200 or more items - at $3.50–$9.50, $3.20–$6 or $2.10–$4.95 per item
The minimum site charge at $89–$250 and exactly how many items it covers before the per-item rate starts
Fixed RCD push-button and trip-time tests at $5–$20 per unit and portable RCDs at $5.49–$12 per unit, counted separately from appliances
Emergency and exit light tests at $7–$20 per fitting, with the six-monthly discharge test named
Microwave leakage tests at $5–$30 per unit and three-phase equipment at $4–$9.50 per item as their own lines
Fire extinguisher and fire blanket inspections at $10–$35 per unit where bundled with the visit, and who services them otherwise
Extension leads and power boards at $2–$8 per item, and the on-site repair basis - a plug top replaced at $15–$55 per item
The tester's competency - a nationally accredited portable appliance testing course or an electrical licence - and the register and report included
A single GST basis across every line, with the retest interval the quote assumes and the tester's ABN and insurance
Test and tag cost on the Gold Coast: offices, factories and kitchens
Test and tag cost on the Gold Coast is a per-item rate that falls with volume: $3.50–$9.50 per item for 1 to 50 items (typically $5.50), $3.20–$6 per item for 51 to 200 (typically $4.50) and $2.10–$4.95 per item for 200 or more (typically $3.50). Beneath the small end sits the minimum site charge of $89–$250, and a Gold Coast quote should state how many items it covers before the per-item rate starts.
Access and plant write the rest of a Gold Coast quote. A Surfers Paradise or Broadbeach tenancy adds an after-hours window and a dock slot; a business with sites at Robina, Varsity Lakes and Southport adds a minimum per site; a Molendinar or Arundel factory adds three-phase equipment at $4–$9.50 per item. Around the appliances sit fixed safety switches at $5–$20 per unit, portable RCDs at $5.49–$12 per unit, emergency and exit lights at $7–$20 per fitting, microwave leakage tests at $5–$30 per unit, fire extinguisher inspections at $10–$35 per unit, leads and power boards at $2–$8 per item and the plug top replaced on site at $15–$55 per item, with the hourly rate of $60–$150 for a site whose count is unknown.
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. The Queensland Electrical Safety Regulation 2013 sets the intervals in the regulation itself: for manufacturing work, double-insulated equipment at least once every year and other equipment at least once every 6 months; for service work, equipment used only for office work at least once every 5 years and otherwise at least once every year; for construction work, equipment must comply with AS/NZS 3012; amusement devices at least once every 6 months; safety switches tested by a competent person at the AS/NZS 3760 intervals; and hire equipment inspected and tested by a competent person before each hiring and tested and tagged at least once every 6 months, with records kept for at least 5 years. Ask the Gold Coast tester to show the course or licence on the quote and to name the register and report that stay with you after the visit.
Test and tag cost by item count and site type in Gold Coast
Quick answerGold Coast pricing follows the count: a James Street Burleigh Heads cafe or a Tedder Avenue Main Beach shop sits on the minimum of $89–$250 or in the $3.50–$9.50 per-item band, a Bundall or Robina office floor at $3.20–$6 per item, and a Yatala or Molendinar factory at $2.10–$4.95 per item.
Count moves a Gold Coast test and tag price in bands. To 50 items the rate is $3.50–$9.50 per item, from 51 to 200 it is $3.20–$6 and from 200 it is $2.10–$4.95, so a Griffith Street Coolangatta boutique and a Southport floor pay a different rate for the same laptop. At the bottom the minimum site charge of $89–$250 replaces the per-item sum, which is the figure a Surfers Paradise kiosk or a Burleigh cafe is really quoted.
Site type adds the lines count cannot. A Molendinar or Arundel factory adds three-phase equipment at $4–$9.50 per item, portable RCDs at $5.49–$12 per unit and leads and power boards at $2–$8 per item; a Southport or Bundall office adds fixed safety switches at $5–$20 per unit and emergency and exit lights at $7–$20 per fitting; a Broadbeach or Burleigh kitchen adds microwave leakage tests at $5–$30 per unit and fire extinguisher inspections at $10–$35 per unit. Failed plug tops are replaced on the spot at $15–$55 per item, and a Yatala site with no count goes to the hourly rate of $60–$150.
Frequently Asked Questions — Test and Tag Cost in Gold Coast
What is the price of test and tag in Gold Coast?
From our Gold Coast table: $3.50–$9.50 per item for 1 to 50 items (typically $5.50); $3.20–$6 per item for 51 to 200 items (typically $4.50); $2.10–$4.95 per item for 200 or more (typically $3.50); minimum site charge $89–$250.
How much does test and tag cost per item in Gold Coast?
A small job of 1 to 50 items costs $3.50–$9.50 per item in Gold Coast, with $5.50 typical, and the rate steps down to $3.20–$6 for 51 to 200 items and $2.10–$4.95 for 200 or more. A Surfers Paradise or Broadbeach tower floor adds an after-hours window and a dock booking to the visit; a single shop on Griffith Street Coolangatta needs neither, and a business spread across Robina, Varsity Lakes and Southport pays a minimum at each site.
What is the minimum charge for test and tag in Gold Coast?
Going by our Gold Coast table, the minimum site charge or call-out is $89–$250, typically $125, and it usually covers a stated number of items before the per-item rate applies. Cafes on James Street Burleigh Heads, kiosks at Surfers Paradise and single shops on Tedder Avenue Main Beach are the Gold Coast buyers who usually land on the minimum, and the quote should say how many items it covers.
How much does RCD testing cost in Gold Coast?
A fixed RCD push-button and trip-time test is $5–$20 per unit on our Gold Coast table, with $15 typical, and a portable RCD test $5.49–$12 per unit; both are counted separately from the appliances plugged into them.
How often does equipment need to be tested and tagged in Gold Coast?
SafeWork SA reproduces the model Code of Practice interval table: equipment in factories, workshops, manufacturing, assembly, maintenance and fabrication is tested every 6 months, with a portable RCD push-button tested daily or before every use, a fixed RCD push-button every 6 months and RCD operating-time tests every 12 months; equipment that is flexed in normal use or sits in a hostile environment every 12 months; equipment that is not flexed, not open to abuse and not in a hostile environment every 5 years; residential-type areas such as hotels, motels, boarding houses, halls and hostels every 2 years; commercial cleaning equipment every 6 months; and hire equipment inspected before each hire and tested and tagged every 3 months. Only a competent person may inspect and test: someone who has completed a nationally accredited portable appliance testing course through a registered training organisation, or a licensed electrical worker. The standards it cites are AS/NZS 3760:2022, AS/NZS 3012:2010 for construction and demolition sites and AS/NZS 5762 after a repair. On the Gold Coast, have the tester print the retest date on each tag and in the register so a Varsity Lakes gym or a Yatala plant books its next visit from the register, not from memory.
Who is allowed to test and tag in Gold Coast?
The Queensland Electrical Safety Regulation 2013 sets the intervals in the regulation itself: for manufacturing work, double-insulated equipment at least once every year and other equipment at least once every 6 months; for service work, equipment used only for office work at least once every 5 years and otherwise at least once every year; for construction work, equipment must comply with AS/NZS 3012; amusement devices at least once every 6 months; safety switches tested by a competent person at the AS/NZS 3760 intervals; and hire equipment inspected and tested by a competent person before each hiring and tested and tagged at least once every 6 months, with records kept for at least 5 years. On our Gold Coast table an hourly rate of $60–$150 applies where the item count is unknown or the site is complex, with $90 typical.
What do emergency and exit light tests cost in Gold Coast?
Emergency and exit light tests cost $7–$20 per fitting in Gold Coast on a six-monthly cycle, with $12 typical, and most testers quote them alongside the appliance visit. Office floors in Southport, Bundall and Robina and tenancies at Pacific Fair and Robina Town Centre are the usual Gold Coast jobs; ask for the fittings counted on the quote and the discharge test shown as its own line.
Does test and tag cover microwaves, three-phase equipment and fire extinguishers in Gold Coast?
A microwave leakage test is $5–$30 per unit, three-phase equipment $4–$9.50 per item and a fire extinguisher or fire blanket inspection bundled with the visit $10–$35 per unit on our Gold Coast table. Surfers Paradise, Broadbeach and Burleigh kitchens buy the microwave line on the Gold Coast, and Yatala, Molendinar and Arundel factories the three-phase line; ask whether the extinguisher inspection is on the same visit or quoted by a separate fire contractor.
What does a failed item cost to fix during a Gold Coast test and tag visit?
A plug top replaced on site costs $15–$55 per item on our Gold Coast table, with $25 typical, and an extension lead or power board test $2–$8 per item. AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, was published on 29 June 2022 as a complete revision superseding AS/NZS 3760:2010, and Standards Australia describes its interval recommendations as based on equipment type, environment and usage; AS/NZS 2293.2:2019 is the routine service and maintenance part of the emergency lighting and exit sign standard. On a Gold Coast quote, ask for failed items to be listed in the register with the plug top at $15–$55 per item on its own line, so the repair and the retest can be reconciled after the visit.