How much does pressure washing cost in Byron Bay?
Pressure washing in Byron Bay costs $42–$105/hr, or from $160–$420 for a standard driveway clean. A full house exterior wash runs $260–$735. Decking and paving is $160–$470. Regular pressure washing extends the life of concrete, timber, and rendered surfaces and dramatically improves street appeal.
Comparing cities, or after the Australia-wide picture? See the national guide: Pressure washing cost in Australia.
Pressure Washing Prices in Byron Bay 2026: Cost Table, Price List and Hourly Rates
| Service | Low | Typical | High |
|---|---|---|---|
| Pressure washing (hourly rate) | $42/hr | $68 | $105 |
| Driveway cleaning (standard) | $160total | $260 | $420 |
| Full house exterior wash (single storey) | $260total | $440 | $735 |
| Full house exterior wash (double storey) | $470total | $790 | $1,150 |
| Deck / patio cleaning | $160total | $295 | $470 |
| Fence cleaning (per lm, one side, up to 1.8 m) | $5/lm | $10 | $19 |
| Roof cleaning (standard home) | $315total | $945 | $1,375 |
| Pool surrounds / paving | $160total | $295 | $400 |
| Concrete path / footpath | $105total | $145 | $230 |
| Brick, block or rendered wall clean (single wall, up to ~30 m²) | $125total | $170 | $315 |
| Soft wash, house exterior (single storey, walls + eaves) | $315total | $505 | $680 |
| Commercial building wash (low-rise, up to 3 storeys) | $420total | $840 | $2,100 |
| Mould treatment & wash (full exterior) | $315total | $580 | $945 |
| Mould-inhibitor treatment (add-on) | $52per job | $74 | $160 |
You're in.
A local installer will be in touch about your job. No spam, no call centre.
Getting quotes for pressure washing work in Byron Bay? Get a quote from a local tradie — free, no obligation.
Get Byron Bay quotes →Prices include GST. Based on Byron Bay metro area, November 2026. Outer suburbs may vary.
What Affects Pressure Washing Costs in Byron Bay
Surface type
Concrete driveways and paths in Byron Bay ($160–$420) are the most common. Decking, paving, rendered walls, and brick all have different pressures and methods needed to avoid damage.
Area size
Larger areas get a better rate per sqm in Byron Bay. A small courtyard is proportionally more expensive per sqm than a large driveway or commercial car park.
Degree of soiling
Light mould and algae on a recently built surface clean quickly. Years of embedded grime, tyre marks, and extensive biological growth in Byron Bay take much longer and may require chemical pre-treatment.
Chemical treatment
Some surfaces benefit from hot water or chemical pre-treatment for mould, algae, or rust stains. This adds cost but produces better results for heavily soiled Byron Bay properties.
Access & obstacles
Cars need moving, furniture relocating, and drains protecting. Tight spaces and upstairs balconies in Byron Bay take longer to set up and access safely.
Roof cleaning
Roof pressure washing in Byron Bay ($315–$1,375) requires specialist equipment and training — incorrect pressure on terracotta or concrete tiles causes damage. Always use a specialist for roofs.
How to Save Money on Pressure Washing Cost in Byron Bay
Pressure Washing Cost in Byron Bay by Job Size
Say a house wash and a roof clean are booked together. The house wash at $260–$735 and the roof at $315–$1,375 come to $575–$2,110, before any pre-treatment for mould, algae or rust.
What moves a job of that size in Byron Bay is the state of the surface and the access. Light mould on a recently built surface cleans quickly, years of grime and tyre marks can call for a pre-treatment, and tight spaces or upstairs balconies take longer to set up. A second storey moves the house wash from $260–$735 to $470–$1,150.
Pressure Washing Cost in Byron Bay: What the Quote Should Include
A Byron Bay pressure washing quote, whether for a home in Belongil, Suffolk Park or Mullumbimby, should say how heavily soiled each surface is and what pre-treatment follows. Each surface needs its own size, method and line.
- Each surface's condition described, from light mould on a recently built surface to years of grime and tyre marks, with the pre-treatment step named.
- Rust stains, mould or algae treated with hot water or a chemical pre-treatment, shown as a line against $315–$945 rather than hidden in the wash.
- The driveway at $160–$420 and path at $105–$230, each measured, with a small courtyard measured on its own.
- Decking, paving, rendered walls and brick each named with the pressure planned for that surface, to avoid damage.
- Upstairs balconies and tight spaces noted as access, with set-up time shown if it is charged.
- Cars moved, furniture relocated and drains protected, with who does each step stated.
- The roof at $315–$1,375 on its own line, naming the method used on terracotta or concrete tiles.
- A single-storey house wash at $260–$735 and a double-storey wash at $470–$1,150, with a soft wash at $315–$680 for painted or rendered walls.
- A wash before painting or rendering, or before a sale, dated so the next trade or the listing can follow.
Frequently Asked Questions — Pressure Washing Cost in Byron Bay
Our Methodology
These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed November 2026. Read our full methodology →