Merbau
$300–$550
Installed, per m² · typically $420
- The cheapest of the three hardwoods
- Imported; red-brown boards that darken with age
- New boards bleed tannin when wet, which can stain paving below
Spotted gum
$350–$600
Installed, per m² · typically $480
- Australian hardwood with a wavy, mixed-tone grain
- Dearest at the typical rate
- Very hard, so it resists dents and wear
Blackbutt
$330–$620
Installed, per m² · typically $450
- Australian hardwood, pale and even in colour
- Priced between the other two
- A common choice where a lighter deck is wanted
The short answer
Merbau is the cheaper deck: $300 to $550 per m² installed, against $350 to $600 per m² for spotted gum. At the typical rates the difference is small per square metre, so on most decks the choice comes down to colour, where the timber comes from, and how you feel about tannin stains in the first few months.
- Choose merbau for the lowest price and a classic red-brown deck.
- Choose spotted gum for an Australian hardwood that is very hard underfoot.
- Consider blackbutt ($330 to $620 per m²) if you want a lighter-coloured Australian timber.
Decking Cost in your city
Installed price per square metre
These rows are a finished deck: frame, boards, fixings and labour. Treated pine and composite are shown for scale.
| Deck (installed) | Low | Typical | High | Basis |
|---|---|---|---|---|
| Merbau | $300 | $420 | $550 | per m² |
| Blackbutt | $330 | $450 | $620 | per m² |
| Spotted gum | $350 | $480 | $600 | per m² |
| Treated pine | $180 | $260 | $350 | per m² |
| Composite | $280 | $480 | $700 | per m² |
National price bands from the price table in our decking cost guide, GST included. City pages carry the prices for your city.
Worked example: a 30 m² deck
| Timber | Working (typical rate) | At the typical rate | Low to high |
|---|---|---|---|
| Merbau | 30 × $420 | $12,600 | $9,000–$16,500 |
| Blackbutt | 30 × $450 | $13,500 | $9,900–$18,600 |
| Spotted gum | 30 × $480 | $14,400 | $10,500–$18,000 |
30 m² × the installed rate in our national decking table. Steps, balustrades, a raised frame and removing an old deck ($20 to $55 per m²) have their own rows.
How durable is each timber?
The Queensland Government publishes the properties of commercial timbers. All three are rated in the top durability class for use above the ground, which is how a deck board is used.
| Timber | Durability above ground | Hardness |
|---|---|---|
| Merbau (sold as kwila in Queensland) | Class 1 (life expectancy more than 40 years) | Hard (rated 2 on a 6-class scale) |
| Spotted gum | Class 1 (life expectancy more than 40 years) | Very hard (rated 1 on a 6-class scale) |
| Blackbutt | Class 1 (life expectancy more than 40 years) | Hard (rated 2 on a 6-class scale) |
Ratings are for sound, seasoned heartwood. How long your deck lasts also depends on ventilation under it, drainage and how often it is oiled.
Upkeep costs are the same
Any hardwood deck greys off if it is left unoiled. Keeping the colour costs the same whichever timber you choose: a clean and re-oil is $15 to $45 per m², and a full sand and oil for a tired deck is $25 to $60 per m².
Merbau vs spotted gum: for and against
Merbau
For
- Lowest price of the hardwoods
- Stable boards that are easy to work
- Widely stocked, so easy to match later
Against
- Tannin bleed can stain tiles, pavers and render below a new deck
- Imported, so ask the supplier for its certification
- Darkens over time
Spotted gum
For
- Very hard and wear-resistant
- Australian grown
- Striking mixed-tone grain
Against
- Highest typical price of the three
- Very hard timber is slower to cut and fix
- Colour varies board to board, which not everyone likes
Which should you choose?
- Tightest budget for real hardwood: merbau.
- Deck above light paving, tiles or a pool surround: spotted gum or blackbutt, or let merbau weather and wash it down before the area below is finished.
- High-traffic entertaining deck: spotted gum, for its hardness.
- Light, coastal look: blackbutt.
- No appetite for oiling: look at composite instead. See our timber vs composite decking guide.
To price your own deck, the decking calculator works out boards and cost for your city.
Frequently asked questions
Is merbau cheaper than spotted gum?
Yes. A merbau deck is $300 to $550 per m² installed and a spotted gum deck is $350 to $600 per m² on our national table.
How much does a 30 m² merbau deck cost?
At the typical installed rate on our national table, 30 m² of merbau comes to $12,600 (30 × the typical rate), with a range of $9,000–$16,500. Spotted gum over the same area comes to $14,400.
Which lasts longer, merbau or spotted gum?
Queensland Government timber data rates both Class 1 for durability above the ground, with a life expectancy of more than 40 years. Spotted gum is the harder of the two.
Is blackbutt cheaper than spotted gum?
At the typical rate, yes: blackbutt is $330 to $620 per m² installed against $350 to $600 per m² for spotted gum.
What does it cost to re-oil a hardwood deck?
A clean and re-oil is $15 to $45 per m² on our national table. A full sand and oil is $25 to $60 per m².
Settled on a timber? Get quotes from local deck builders and compare them against the rows above.
Get decking quotes →Where these figures come from
Every price on this page is a row of the national price table in the cost guide named below, so it moves when that guide is re-priced. Worked examples are a stated size multiplied by a row, with the working shown. Anything that is not a price is taken from the official pages listed. Prices are guides, not quotes: your site, access and finish level decide the figure.
- Prices: the national price table in our decking cost guide, checked November 2026
- Queensland Government: Blackbutt timber properties (business.qld.gov.au) · source
- Queensland Government: Kwila (merbau) timber properties (business.qld.gov.au) · source
- Queensland Government: Spotted gum timber properties (business.qld.gov.au) · source