Electric storage

$800–$3,000

Supplied and installed · typically $1,800

  • The cheapest system to buy and install
  • Generally dearer to run, unless rooftop solar powers it
  • Goes indoors or out, with no flue

Gas storage

$1,200–$3,500

Supplied and installed · typically $2,200

  • Needs a gas connection and outdoor venting
  • Reheats a tank quickly
  • The least efficient gas option

Gas continuous flow

$1,500–$3,500

Supplied and installed · typically $2,200

  • Heats water only when a tap runs
  • The most common type of gas water heater
  • Generally uses less energy than gas storage

The short answer

Electric storage is the cheapest hot water system to put in: $800 to $3,000 installed, against $1,200 to $3,500 for gas storage and $1,500 to $3,500 for gas continuous flow. Purchase price is only half the decision. The Australian Government's energy guidance says electric storage is the cheapest to buy and install and is generally more expensive to run, unless it is powered by a solar PV system.

  • Already on gas with no solar? Gas continuous flow is the usual like-for-like choice.
  • Have rooftop solar? An electric system heated in the middle of the day can be cheap to run.
  • No gas at the house? Stay electric, and price a heat pump ($3,000 to $6,000) before you buy another storage tank.

What each system costs installed

These rows are the unit supplied and installed. A heat pump is shown beside them because it is the efficient electric option and the one most people now weigh against gas.

SystemLowTypicalHighBasis
Electric storage$800$1,800$3,000supplied and installed
Gas storage$1,200$2,200$3,500supplied and installed
Gas continuous flow$1,500$2,200$3,500supplied and installed
Heat pump (electric)$3,000$4,200$6,000supplied and installed

National price bands from the price table in our hot water system cost guide, GST included. City pages carry the prices for your city.

Running costs: what the official guidance says

Water heating accounts for about 25 percent of average household energy use, so the system you choose shows up on every bill.

Our hot water table carries one running-cost row, for an electric system: $500 to $1,200 per year. We do not publish a gas running-cost row, because it depends on your gas tariff and supply charge.

Costs people forget

ExtraLowTypicalHighBasis
Removing and disposing of the old system$75$130$200per job
Tempering valve$150$250$400per job
Gas connection (gas side only)$200$350$600per job
Urgent same-day replacement, like for like$1,300$2,300$4,000supplied and installed

National price bands from the price table in our hot water system cost guide and gas fitting cost guide, GST included. Switching fuel usually costs more than replacing like with like, because the plumbing, gas or electrical supply has to change. Ask for that work as its own line on the quote. City pages carry the prices for your city.

Gas vs electric hot water: for and against

Electric storage

For

  • Lowest price installed
  • No flue, so it can go in a cupboard or outdoors
  • Can run off rooftop solar or an off-peak tariff

Against

  • Generally more expensive to run on grid power
  • A tank can run out on a heavy-use morning
  • Takes time to reheat once empty

Gas

For

  • Continuous flow heats only what you use
  • Compact wall-mounted units free up floor space
  • Works whatever the weather or time of day

Against

  • Needs a gas connection and its supply charge
  • Usually installed outdoors because of venting
  • Gas storage is particularly inefficient

Which should you choose?

Rebates change the sums for heat pump and solar systems. Our hot water rebates guide lists what each state offers, and the hot water system cost guide has every row.

Frequently asked questions

Is gas or electric hot water cheaper to install?

Electric storage is cheapest: $800 to $3,000 supplied and installed on our national table. Gas storage is $1,200 to $3,500 and gas continuous flow is $1,500 to $3,500.

Is gas or electric hot water cheaper to run?

It depends on your tariffs and whether you have solar. The Australian Government guidance says electric storage is generally more expensive to run unless powered by a solar PV system, and that gas storage is particularly inefficient. Continuous flow gas generally uses less energy than gas storage.

What does it cost to run an electric hot water system?

Our national table puts an electric system at $500 to $1,200 per year. Your figure depends on the tariff, the tank size and how much hot water the household uses.

Is a heat pump better than gas or electric storage?

A heat pump costs more up front ($3,000 to $6,000 installed) but uses 30% of the energy of a conventional electric hot water system, so it is cheap to run.

What does it cost to remove the old hot water system?

Removal and disposal is $75 to $200 per job on our national table. Many installers include it in a like-for-like replacement, so check the quote.

Ready to replace your system? Get quotes from local installers and compare them against the rows above.

Get hot water quotes →

Where these figures come from

Every price on this page is a row of the national price table in the cost guide named below, so it moves when that guide is re-priced. Worked examples are a stated size multiplied by a row, with the working shown. Anything that is not a price is taken from the official pages listed. Prices are guides, not quotes: your site, access and finish level decide the figure.

  1. Prices: the national price table in our gas fitting cost guide, checked November 2026
  2. Prices: the national price table in our hot water system cost guide, checked November 2026
  3. energy.gov.au: Hot water systems (Australian Government) (energy.gov.au) · source
  4. YourHome: Hot water systems (Australian Government) (yourhome.gov.au) · source

Related guides