Updated November 2026·Independently researched·11 min read
Commercial signage in Sydney runs $1,800–$5,000
for an illuminated lightbox fascia sign installed, GST included - letters, pylons, graphics and wraps below
An illuminated lightbox fascia on a Sydney shopfront costs $1,800–$5,000 installed, with $3,000 typical. A Wetherill Park distributor pricing a single-tenant pylon on the street frontage looks at $8,000–$30,000, and a Surry Hills cafe that only needs an A-frame at $120–$600.
+4.4%Commercial Signage costs in Sydney are up around 4.4% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical illuminated lightbox fascia in Sydney
$3,000
per sign installed, Sydney 2026, GST included
Illuminated lightbox fascia sign, installed
$1,800-$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000-$10,000
Single-tenant pylon sign, 4-6 m, installed
$8,000-$30,000
$1,800$3,000$5,000
Commercial signage in Sydney is priced by sign type: $1,800–$5,000 for an illuminated lightbox fascia installed, $3,000–$10,000 for a set of illuminated 3D letters, $8,000–$30,000 for a single-tenant pylon of 4 to 6 metres and $15,000–$50,000 for a multi-tenant pylon of 8 metres and up. Window work runs $40–$180 a square metre for frosted film and $80–$250 a square metre for printed graphics.
What separates two Sydney quotes for the same fascia is the frontage, not the sign. A heritage shopfront on Oxford Street in Paddington or in The Rocks is a planning question before it is a fabrication one, a tenancy in Westfield Parramatta or Bondi Junction has centre guidelines on top of the council's, and a Pitt Street Mall frontage needs after-hours access and a boom lift. Every illuminated sign carries an electrical connection at $200–$2,400 by a licensed electrician, shown as its own line.
The small lines add up: design and artwork setup at $150–$960 when the logo arrives as a JPEG, old sign removal and make-good at $200–$800 when a King Street Newtown tenancy changes hands, and a full van wrap at $3,500–$8,500 for the fleet that drives the brand around. Prices include GST.
Quick answerCommercial signage in Sydney runs $1,800–$5,000 for an illuminated lightbox fascia sign installed in 2026, $3,000–$10,000 for a set of illuminated 3D letters and $8,000–$30,000 for a single-tenant pylon, with the fascia size, illumination and council approvals setting the total. All figures on this page include GST. Get free Sydney quotes →
Commercial Signage Prices in Sydney 2026: Cost Table and Price List
Service
Low
Typical
High
Illuminated lightbox fascia sign, installed
$1,800per sign
$3,000
$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000per set
$5,500
$10,000
Face-lit LED 3D letter, 300-500 mm (letters only)
$150per letter
$400
$700
Single-tenant pylon sign, 4-6 m, installed
$8,000per sign
$18,000
$30,000
Multi-tenant pylon sign, 8 m and up, installed
$15,000per sign
$30,000
$50,000
Monument or entry sign, installed
$2,500per sign
$6,000
$18,000
Printed A-frame sign
$120per sign
$300
$600
Frosted or privacy window film, installed
$40/m²
$100
$180
Printed window or wall graphics, installed
$80/m²
$150
$250
Full vehicle wrap, car or sedan
$2,500per vehicle
$3,500
$4,500
Full vehicle wrap, van
$3,500per vehicle
$5,500
$8,500
Statutory safety sign, supply only
$7.50each
$40
$165
Wayfinding sign suite, per office floor
$2,000per floor
$3,500
$6,000
Electrical connection for an illuminated sign
$200per sign
$600
$2,400
Design and artwork setup
$150per job
$400
$960
Old sign removal and make-good
$200per job
$450
$800
Scoping commercial signage work in Sydney? Get a quote from a local commercial contractor - free, no obligation.
What does an illuminated shopfront sign cost in Sydney?$1,800–$5,000 installed for a lightbox fascia, $3,000 typical. A set of illuminated 3D letters costs $3,000–$10,000, and the electrical connection by a licensed electrician is a separate $200–$2,400 line.
What gets added to a Sydney signage quote?Design and artwork setup at $150–$960 when there are no vector files, old sign removal and make-good at $200–$800 when taking over a tenancy, the electrical connection at $200–$2,400 for anything illuminated, and the council's own permit fee where a sign needs approval.
Worked Commercial Signage Cost Scenarios — Sydney
Sydney examples priced from this page's rows: a Crown Street Surry Hills cafe, a Macquarie Park office floor and a Smithfield distribution yard. Each line names the row it draws on; the quote you receive prices your own frontage and approvals.
Crown Street Surry Hills cafe. A new cafe takes over a Crown Street tenancy and has the previous fit-out's fascia removed and made good at $200–$800, then fits an illuminated lightbox fascia at $1,800–$5,000 ($3,000 typical) with the electrical connection at $200–$2,400 on its own line, frosted film on the lower glazing at $40–$180 a square metre and a printed A-frame at $120–$600 for the footpath.
Macquarie Park office floor. A tenant fitting out a floor in a Macquarie Park building orders a wayfinding sign suite at $2,000–$6,000 for the floor, supply-only statutory safety signs at $7.50–$165 each for the fire stairs and plant rooms, and illuminated 3D letters in the lift lobby at $3,000–$10,000, with design and artwork setup at $150–$960 because the brand files are not vector.
Smithfield distribution yard. A freight business on a main road in Smithfield puts up a single-tenant pylon of 4 to 6 metres at $8,000–$30,000, typically $18,000, with the engineering certificate and council application named on the quote, and wraps three delivery vans at $3,500–$8,500 each.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping commercial signage work in Sydney? Get a quote from a local commercial contractor - free, no obligation.
Sydney's signage work runs from CBD and Barangaroo tower lobbies and the retail strips of Oxford Street, King Street Newtown and The Corso at Manly, through the centres at Parramatta, Bondi Junction and Macquarie Centre, to the industrial frontages of Wetherill Park, Eastern Creek, Smithfield and Moorebank and the hospitality precincts at Darling Harbour and Bondi Beach.
Retail strips: Paddington, Newtown, Surry Hills, Manly - An illuminated lightbox fascia at $1,800–$5,000 or a set of illuminated 3D letters at $3,000–$10,000 is the usual order, with frosted film at $40–$180 a square metre on the glazing and a printed A-frame at $120–$600; heritage frontages in Paddington and The Rocks go through the planning step first.
Shopping centres: Parramatta, Bondi Junction, Macquarie Centre - Centre tenancies specify illuminated 3D letters on the bulkhead, $3,000–$10,000 installed or $150–$700 a letter for the letters alone, and the centre's own guidelines sit on top of the council's approval.
Industrial frontages: Wetherill Park, Eastern Creek, Smithfield, Moorebank - A single-tenant pylon at $8,000–$30,000 on the street, a multi-tenant pylon at $15,000–$50,000 on an estate entry and a monument or entry sign at $2,500–$18,000 at the gate, each with engineering certification on the quote.
Offices: CBD, North Sydney, Macquarie Park, Parramatta Square - A wayfinding sign suite at $2,000–$6,000 a floor, supply-only statutory safety signs at $7.50–$165 each, and printed window or wall graphics at $80–$250 a square metre in reception.
Fleets and hospitality: Mascot, Darling Harbour, Bondi - A full van wrap at $3,500–$8,500 and a car or sedan wrap at $2,500–$4,500 for trades and delivery fleets based around Mascot and Alexandria; venues at Darling Harbour and Bondi Beach add menu and price displays, which the ACCC says must show one total price including GST to consumers.
What a Compliant Commercial Signage Quote Includes — Cost in Sydney
Before comparing Sydney quotes, check each one prices the same sign size, substrate and illumination, says whether install, electrical connection and council approval are in or out, and shows design, removal and GST on their own lines.
Sign type, dimensions, substrate and finish - lightbox, fabricated letters, pylon, film or print - with illumination stated as face-lit, halo or unlit
Install as its own line, naming access equipment such as a boom lift or scaffold and any after-hours or traffic-management requirement
Electrical connection for an illuminated sign at $200–$2,400, done by a licensed electrician, with the certificate named
Design and artwork setup at $150–$960 where no print-ready vector files are supplied, or a nil line where they are
Old sign removal and make-good at $200–$800 when the frontage carries a previous tenant's sign
Sign-permit or planning application fees shown as a pass-through at the council's published rate, and who lodges it
Engineering certification for a pylon, monument or projecting sign, and the wind rating it is built to
Warranty terms on LEDs, laminates and print fade, and the service call-out basis after the warranty
A single GST basis across every line, with the sign company's ABN and proof of insurance
Commercial signage cost in Sydney: shopfronts, centres and industrial frontages
Commercial signage cost in Sydney for a shopfront starts with an illuminated lightbox fascia at $1,800–$5,000 installed (typically $3,000) or a set of illuminated 3D letters at $3,000–$10,000, and steps up to $8,000–$30,000 for a single-tenant pylon and $15,000–$50,000 for a multi-tenant pylon on an industrial estate entry. Priced per letter, a face-lit LED letter of 300 to 500 mm is $150–$700 before install, and a monument or entry sign at a gate is $2,500–$18,000.
The frontage writes the rest of a Sydney quote. Heritage shopfronts in Paddington, The Rocks and Balmain and centre tenancies at Parramatta and Bondi Junction add an approval step and often a guideline-driven letter style; a Pitt Street Mall or Barangaroo frontage adds after-hours access and a boom lift; a Smithfield or Eastern Creek street frontage adds engineering for wind on a pylon. Around the sign itself sit the electrical connection at $200–$2,400, design and artwork setup at $150–$960 where the files are not vector, and old sign removal and make-good at $200–$800 on a changeover.
The NSW Planning Portal says a business identification sign can be exempt development when it is securely fixed, has the owner's written consent and stays within the cap of three signs on a single-tenant building or six per building, that a sign over a road needs approval under section 138 of the Roads Act, and that projecting wall, pylon and directory signs in business and industrial zones are complying development under the Commercial and Industrial Alterations Code. Its fact sheet adds that an illuminated exempt sign must conceal its cables, must not animate or flash, and within 50 metres of a residential zone may only be lit between 7 am and 10 pm. For a Sydney sign that needs approval, the quote should name who lodges with the council and show the council's published fee as a pass-through line.
Commercial signage cost by sign type and size in Sydney
Quick answerSydney pricing steps by sign type: a Newtown or Surry Hills cafe sits in the $120–$600 A-frame and $1,800–$5,000 lightbox bracket, a Bondi Junction or Macquarie Centre tenancy at $3,000–$10,000 for illuminated 3D letters, and a Wetherill Park or Moorebank frontage at $8,000–$30,000 to $15,000–$50,000 for a pylon.
Size moves a Sydney sign price in two ways. Fascias and lightboxes are priced by width and illumination, so a long illuminated frontage on Oxford Street sits toward the top of $1,800–$5,000; fabricated letters are priced per letter at $150–$700 for a 300 to 500 mm face-lit letter, so a long trading name on a Parramatta bulkhead climbs through the $3,000–$10,000 set band. Film and print are priced by the square metre, $40–$180 for frosting and $80–$250 for printed graphics, so a full glazed frontage at Barangaroo is simply more metres.
Height is the other lever. A single-tenant pylon of 4 to 6 metres at $8,000–$30,000 needs a footing, engineering and a crane day; a multi-tenant pylon of 8 metres and up at $15,000–$50,000 on an Eastern Creek estate entry needs all three at a larger scale and a council application. Vehicles scale the same way: a car or sedan wrap at $2,500–$4,500 against a full van wrap at $3,500–$8,500 for a long-wheelbase van based at Mascot.
Frequently Asked Questions — Commercial Signage Cost in Sydney
What is the price of commercial signage in Sydney?
From our Sydney table: $1,800–$5,000 for an illuminated lightbox fascia sign installed (typically $3,000); $3,000–$10,000 for an illuminated 3D letter set (typically $5,500); $8,000–$30,000 for a single-tenant pylon sign (typically $18,000).
How much does an illuminated shopfront sign cost in Sydney?
An illuminated lightbox fascia sign in Sydney costs $1,800–$5,000 installed, with $3,000 typical, plus the electrical connection at $200–$2,400 by a licensed electrician. A Pitt Street Mall or Barangaroo frontage adds after-hours access and a boom lift to the install line; a single-storey shop on King Street Newtown usually needs neither.
What does a pylon sign cost in Sydney?
Going by our Sydney table, a single-tenant pylon sign of 4 to 6 metres costs $8,000–$30,000 installed, typically $18,000, and a multi-tenant pylon of 8 metres and up $15,000–$50,000. Industrial estates at Wetherill Park, Eastern Creek and Moorebank are the usual Sydney buyers, and the quote should name the engineering certificate, the footing and who lodges the council application.
How much are illuminated 3D letters in Sydney?
A set of 5 to 8 illuminated 3D letters installed costs $3,000–$10,000 on our Sydney table, with $5,500 typical; priced per letter, a face-lit LED letter of 300 to 500 mm is $150–$700 for the letters alone, before install.
Do I need council approval for a sign in Sydney?
The NSW Planning Portal says a business identification sign can be exempt development when it is securely fixed, has the owner's written consent and stays within the cap of three signs on a single-tenant building or six per building, that a sign over a road needs approval under section 138 of the Roads Act, and that projecting wall, pylon and directory signs in business and industrial zones are complying development under the Commercial and Industrial Alterations Code. Its fact sheet adds that an illuminated exempt sign must conceal its cables, must not animate or flash, and within 50 metres of a residential zone may only be lit between 7 am and 10 pm. In Sydney the council's own fee schedule applies on top, and heritage frontages in Paddington, The Rocks and Balmain and centre tenancies at Parramatta and Bondi Junction add their own approval steps; ask the sign company to show the fee as a pass-through line and name who lodges.
Who connects an illuminated sign in Sydney?
Energy Safe Victoria says to always engage a registered electrical contractor, who sends a licensed electrician, that do-it-yourself electrical work is illegal and that a Certificate of Electrical Safety is issued for installation work; Building Commission NSW says a licence is required for any electrical wiring work regardless of value, with a Certificate of Compliance for Electrical Work lodged through its eCert portal. On our Sydney table the electrical connection for an illuminated sign is $200–$2,400, with $600 typical, and the sign quote should show it as its own line.
What do window graphics and frosting cost in Sydney?
Frosted or privacy window film costs $40–$180 a square metre installed in Sydney, and printed window or wall graphics $80–$250 a square metre. Glazed frontages at Barangaroo, Macquarie Park and the Bondi Junction centres are the usual Sydney jobs, and the quote should price film and print by the square metre with the measured area shown.
What does a vehicle wrap cost in Sydney?
A full wrap on a car or sedan costs $2,500–$4,500 in Sydney, with $3,500 typical, and a full van wrap $3,500–$8,500. Trades and delivery fleets based around Mascot, Alexandria and Wetherill Park are the usual Sydney buyers; fleet pricing is per vehicle, and the quote should name the film brand and warranty.
What signs does a Sydney workplace have to have?
The National Construction Code 2022, Volume One Part E4, requires an exit sign on, above or beside every required exit, direction signs where an exit is not readily apparent, and exit signs that comply with AS/NZS 2293.1 or the Specification 25 photoluminescent alternative and are lit whenever the building is occupied. WorkSafe ACT classes workplace safety signs as prohibition, mandatory, danger, warning, emergency and fire signs, with colours and placement set by AS 1319-1994 Safety signs for the occupational environment, and the Safe Work Australia model code of practice for the work environment says exit locations should be easy to identify, with signs pointing to exit doors. Supply-only statutory safety signs cost $7.50–$165 each on our Sydney table. A Sydney office floor usually bundles those with a wayfinding sign suite at $2,000–$6,000; ask for the floor plan the signs were set out from.