Updated November 2026·Independently researched·11 min read
Commercial signage in Canberra runs $1,800–$5,000
for an illuminated lightbox fascia sign installed, GST included - letters, pylons, graphics and wraps below
A Canberra shopfront with an illuminated lightbox fascia pays $1,800–$5,000 installed, $3,000 being typical. Put a single-tenant pylon on a Fyshwick road frontage and the line is $8,000–$30,000; a Manuka cafe that wants nothing more than a printed A-frame on the footpath spends $120–$600.
+4.3%Commercial Signage costs in Canberra are up around 4.3% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical illuminated lightbox fascia in Canberra
$3,000
per sign installed, Canberra 2026, GST included
Illuminated lightbox fascia sign, installed
$1,800-$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000-$10,000
Single-tenant pylon sign, 4-6 m, installed
$8,000-$30,000
$1,800$3,000$5,000
Prices for commercial signage in Canberra follow the sign. An illuminated lightbox fascia installed is $1,800–$5,000; a set of illuminated 3D letters, $3,000–$10,000; a single-tenant pylon of 4 to 6 metres, $8,000–$30,000; and a multi-tenant pylon of 8 metres and up, $15,000–$50,000. Glazing is priced by area: $40–$180 a square metre for frosted film and $80–$250 a square metre for printed graphics.
Two Canberra quotes for the same fascia usually differ because of where it hangs. A tenancy inside the Canberra Centre, Westfield Belconnen or Westfield Woden works to the centre's own signage guidelines; a Lonsdale Street Braddon or Kingston Foreshore frontage over a busy footpath needs a boom lift and an early start; and where a sign needs approval, that is settled before anything is fabricated, with the quote naming who takes it to the ACT planning authority. Every lit sign also needs an electrical connection by a licensed electrician at $200–$2,400, quoted on its own line.
Smaller lines follow: $150–$960 for design and artwork setup when the only logo file is a low-resolution image, $200–$800 to remove an old sign and make good when a Manuka tenancy changes hands, and $3,500–$8,500 for a full van wrap on a fleet that works from Fyshwick to Belconnen. Every price includes GST.
Quick answerCommercial signage in Canberra runs $1,800–$5,000 for an illuminated lightbox fascia sign installed in 2026, $3,000–$10,000 for a set of illuminated 3D letters and $8,000–$30,000 for a single-tenant pylon, with the fascia size, illumination and planning approvals setting the total. All figures on this page include GST. Get free Canberra quotes →
Commercial Signage Prices in Canberra 2026: Cost Table and Price List
Service
Low
Typical
High
Illuminated lightbox fascia sign, installed
$1,800per sign
$3,000
$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000per set
$5,500
$10,000
Face-lit LED 3D letter, 300-500 mm (letters only)
$150per letter
$400
$700
Single-tenant pylon sign, 4-6 m, installed
$8,000per sign
$18,000
$30,000
Multi-tenant pylon sign, 8 m and up, installed
$15,000per sign
$30,000
$50,000
Monument or entry sign, installed
$2,500per sign
$6,000
$18,000
Printed A-frame sign
$120per sign
$300
$600
Frosted or privacy window film, installed
$40/m²
$100
$180
Printed window or wall graphics, installed
$80/m²
$150
$250
Full vehicle wrap, car or sedan
$2,500per vehicle
$3,500
$4,500
Full vehicle wrap, van
$3,500per vehicle
$5,500
$8,500
Statutory safety sign, supply only
$7.50each
$40
$165
Wayfinding sign suite, per office floor
$2,000per floor
$3,500
$6,000
Electrical connection for an illuminated sign
$200per sign
$600
$2,400
Design and artwork setup
$150per job
$400
$960
Old sign removal and make-good
$200per job
$450
$800
Scoping commercial signage work in Canberra? Get a quote from a local commercial contractor - free, no obligation.
Prices include GST. Canberra and Queanbeyan, November 2026.
What does an illuminated shopfront sign cost in Canberra?$1,800–$5,000 installed for a lightbox fascia, $3,000 typical. A set of illuminated 3D letters costs $3,000–$10,000, and the electrical connection by a licensed electrician is a separate $200–$2,400 line.
What gets added to a Canberra signage quote?Design and artwork setup at $150–$960 when there are no vector files, old sign removal and make-good at $200–$800 when taking over a tenancy, the electrical connection at $200–$2,400 for anything illuminated, and the ACT planning authority's own permit fee where a sign needs approval.
Worked Commercial Signage Cost Scenarios — Canberra
Three Canberra examples, each priced from this page's rows: a Braddon cafe, a Barton office floor and a Hume warehouse. Each line names the row it uses; your own quote prices your frontage and whatever approval it needs.
Lonsdale Street Braddon cafe. A cafe taking a Lonsdale Street shopfront pays $200–$800 to clear the previous tenant's fascia and make good, installs an illuminated lightbox fascia at $1,800–$5,000 (typically $3,000), lists the electrical connection separately at $200–$2,400, frosts the lower glazing at $40–$180 a square metre and sets a printed A-frame at $120–$600 on the footpath.
Barton office floor. A consultancy fitting out a floor in Barton orders a wayfinding sign suite at $2,000–$6,000, supply-only statutory safety signs at $7.50–$165 each for the exits and the plant room, and illuminated 3D letters for the reception wall at $3,000–$10,000, plus design and artwork setup at $150–$960 because nobody can find the vector logo.
Hume warehouse. A wholesaler with a Hume street frontage puts up a single-tenant pylon of 4 to 6 metres at $8,000–$30,000, $18,000 typical, with engineering certification and the approval application named on the quote, a monument sign at the driveway at $2,500–$18,000, and full wraps on two vans at $3,500–$8,500 each.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping commercial signage work in Canberra? Get a quote from a local commercial contractor - free, no obligation.
Prices include GST. Canberra and Queanbeyan, November 2026.
Commercial Signage Costs by Sector in Canberra
In Canberra the signage work runs from Civic, the Canberra Centre and the Lonsdale Street, Kingston Foreshore and Manuka strips, through the Westfields at Belconnen and Woden and the Canberra Outlet Centre, to the trade and industrial frontages of Fyshwick, Hume, Mitchell and Queanbeyan, the bars and restaurants of Braddon, Kingston Foreshore and NewActon and the office blocks of Barton, Woden and Belconnen.
Retail strips: Braddon, Kingston Foreshore, Manuka - Most orders are an illuminated lightbox fascia at $1,800–$5,000 or illuminated 3D letters at $3,000–$10,000, with frosted film on the glazing at $40–$180 a square metre and a printed A-frame at $120–$600; where a frontage needs approval, it goes through the planning step first.
Shopping centres: Canberra Centre, Westfield Belconnen, Westfield Woden - Bulkhead lettering inside a centre is specified by the centre's guidelines as well as any territory approval: $3,000–$10,000 installed for a set of illuminated 3D letters, or $150–$700 a letter for the letters alone.
Industrial and trade: Fyshwick, Hume, Mitchell, Queanbeyan - A single-tenant pylon at $8,000–$30,000 on the road, a multi-tenant pylon at $15,000–$50,000 where several businesses share an entry and a monument or entry sign at $2,500–$18,000 at the gate, each quoted with its engineering certification.
Offices: Barton, Woden, Belconnen, Civic - A wayfinding sign suite at $2,000–$6,000 per floor, supply-only statutory safety signs at $7.50–$165 each and printed window or wall graphics at $80–$250 a square metre for the reception and meeting rooms.
Fleets and hospitality: Fyshwick, Braddon, NewActon - Fleets based in Fyshwick and Mitchell wrap vans at $3,500–$8,500 and cars or sedans at $2,500–$4,500; bars and restaurants in Braddon, NewActon and on the Kingston Foreshore add menu and price displays, which the ACCC says must show one total price including GST to consumers.
What a Compliant Commercial Signage Quote Includes — Cost in Canberra
Before comparing Canberra quotes, check each one prices the same sign size, substrate and illumination, says whether install, electrical connection and planning approval are in or out, and shows design, removal and GST on their own lines.
Sign type, dimensions, substrate and finish - lightbox, fabricated letters, pylon, film or print - with illumination stated as face-lit, halo or unlit
Install as its own line, naming access equipment such as a boom lift or scaffold and any after-hours or traffic-management requirement
Electrical connection for an illuminated sign at $200–$2,400, done by a licensed electrician, with the certificate named
Design and artwork setup at $150–$960 where no print-ready vector files are supplied, or a nil line where they are
Old sign removal and make-good at $200–$800 when the frontage carries a previous tenant's sign
Sign-permit or planning application fees shown as a pass-through at the ACT planning authority's published rate, and who lodges it
Engineering certification for a pylon, monument or projecting sign, and the wind rating it is built to
Warranty terms on LEDs, laminates and print fade, and the service call-out basis after the warranty
A single GST basis across every line, with the sign company's ABN and proof of insurance
Commercial signage cost in Canberra: Civic frontages, town centres and Fyshwick yards
Commercial signage cost in Canberra for a shopfront opens at an illuminated lightbox fascia, $1,800–$5,000 installed with $3,000 typical, or a set of illuminated 3D letters at $3,000–$10,000. Out on the road the figures rise to $8,000–$30,000 for a single-tenant pylon and $15,000–$50,000 for a multi-tenant pylon, with a monument or entry sign at $2,500–$18,000. Letter by letter, a 300 to 500 mm face-lit LED letter is $150–$700 before it is installed.
Most of the remaining spread in a Canberra quote comes from the site. A centre tenancy at Belconnen or Woden adds a guideline review and often a set letter style; a Civic or Braddon frontage over a busy footpath adds a boom lift and an early start; a Hume or Mitchell pylon adds wind engineering and a footing; and anything that needs approval adds an application before fabrication. Around the sign sit the electrical connection at $200–$2,400, design and artwork setup at $150–$960 when the files are not vector, and old sign removal and make-good at $200–$800 on a changeover.
Whether a sign needs approval in the ACT is a question for the territory's planning authority rather than a council, and the authority publishes its own fee schedule; the quote should name who lodges the application and show the fee as a pass-through line rather than folding it into the sign price. For a Canberra sign that needs approval, the quote should name who lodges the application with the ACT planning authority and show the published fee as a pass-through line.
Commercial signage cost by sign type and size in Canberra
Quick answerCanberra prices step with the sign: a Braddon or Manuka cafe falls in the $120–$600 A-frame and $1,800–$5,000 lightbox range, a Westfield Belconnen or Woden tenancy in the $3,000–$10,000 band for illuminated 3D letters, and a Fyshwick or Hume frontage at $8,000–$30,000 to $15,000–$50,000 for a pylon.
In Canberra, size pushes a sign price up along two tracks. Lightboxes and fascias are priced by width and illumination, so a long lit frontage on Lonsdale Street lands toward the upper end of $1,800–$5,000; fabricated letters are counted one at a time at $150–$700 for a 300 to 500 mm face-lit letter, so a long business name on a Belconnen bulkhead moves up through the $3,000–$10,000 set band. Window film and print are measured in square metres, $40–$180 for frosting and $80–$250 for printed graphics, so a fully glazed office lobby in Barton is just more area.
The other lever is height. A single-tenant pylon of 4 to 6 metres at $8,000–$30,000 brings a footing, engineering and a crane day; a multi-tenant pylon of 8 metres and up at $15,000–$50,000 at a Fyshwick or Mitchell estate entry brings all three, larger, and an approval application. Vehicle wraps scale too: $2,500–$4,500 for a car or sedan, $3,500–$8,500 for a full wrap on a long-wheelbase van out of Fyshwick.
Frequently Asked Questions — Commercial Signage Cost in Canberra
What is the price of commercial signage in Canberra?
From our Canberra table: $1,800–$5,000 for an illuminated lightbox fascia sign installed (typically $3,000); $3,000–$10,000 for an illuminated 3D letter set (typically $5,500); $8,000–$30,000 for a single-tenant pylon sign (typically $18,000).
How much does an illuminated shopfront sign cost in Canberra?
An illuminated lightbox fascia sign in Canberra costs $1,800–$5,000 installed, with $3,000 typical, plus the electrical connection at $200–$2,400 by a licensed electrician. A frontage in Civic or on Lonsdale Street Braddon, where the footpath is busy, adds a boom lift and an early-start install to the job; a single-level shop at Manuka often needs neither.
What does a pylon sign cost in Canberra?
Going by our Canberra table, a single-tenant pylon sign of 4 to 6 metres costs $8,000–$30,000 installed, typically $18,000, and a multi-tenant pylon of 8 metres and up $15,000–$50,000. In Canberra the usual buyers are businesses in Fyshwick, Hume and Mitchell, and the quote should name the engineering certificate, the footing and who lodges any approval application.
How much are illuminated 3D letters in Canberra?
A set of 5 to 8 illuminated 3D letters installed costs $3,000–$10,000 on our Canberra table, with $5,500 typical; priced per letter, a face-lit LED letter of 300 to 500 mm is $150–$700 for the letters alone, before install.
Do I need planning approval for a sign in Canberra?
Whether a sign needs approval in the ACT is a question for the territory's planning authority rather than a council, and the authority publishes its own fee schedule; the quote should name who lodges the application and show the fee as a pass-through line rather than folding it into the sign price. In Canberra, ask the sign company who lodges the application with the ACT planning authority and to show the published fee as a pass-through line; tenancies in the Canberra Centre, Westfield Belconnen and Westfield Woden also go through the centre's own signage approval.
Who connects an illuminated sign in Canberra?
Energy Safe Victoria says to always engage a registered electrical contractor, who sends a licensed electrician, that do-it-yourself electrical work is illegal and that a Certificate of Electrical Safety is issued for installation work; Building Commission NSW says a licence is required for any electrical wiring work regardless of value, with a Certificate of Compliance for Electrical Work lodged through its eCert portal. On our Canberra table the electrical connection for an illuminated sign is $200–$2,400, with $600 typical, and the sign quote should show it as its own line.
What do window graphics and frosting cost in Canberra?
Frosted or privacy window film costs $40–$180 a square metre installed in Canberra, and printed window or wall graphics $80–$250 a square metre. Glazed frontages in Barton, Woden and around the Canberra Centre are the usual Canberra jobs; the quote should price film and print per square metre, show the measured area, and name a UV-stable laminate for glass that takes the afternoon sun.
What does a vehicle wrap cost in Canberra?
A full wrap on a car or sedan costs $2,500–$4,500 in Canberra, with $3,500 typical, and a full van wrap $3,500–$8,500. Trades and delivery fleets based at Fyshwick, Mitchell and Hume are the usual Canberra buyers; wraps are quoted per vehicle, and the quote should name the film brand and the warranty.
What signs does a Canberra workplace have to have?
The National Construction Code 2022, Volume One Part E4, requires an exit sign on, above or beside every required exit, direction signs where an exit is not readily apparent, and exit signs that comply with AS/NZS 2293.1 or the Specification 25 photoluminescent alternative and are lit whenever the building is occupied. WorkSafe ACT classes workplace safety signs as prohibition, mandatory, danger, warning, emergency and fire signs, with colours and placement set by AS 1319-1994 Safety signs for the occupational environment, and the Safe Work Australia model code of practice for the work environment says exit locations should be easy to identify, with signs pointing to exit doors. Supply-only statutory safety signs cost $7.50–$165 each on our Canberra table. An office floor in Barton or Woden typically pairs those with a wayfinding sign suite at $2,000–$6,000; ask to see the floor plan the signs were set out from.