Updated November 2026·Independently researched·11 min read
Commercial solar in Gold Coast runs $22,000–$33,000
for a 30 kW system installed, after STCs, GST included - other sizes and site works below
On the Gold Coast a 30 kW commercial solar system costs $22,000–$33,000 installed after STCs, $27,000 typical. A Yatala manufacturer sizing up to 100 kW compares that with $70,000–$110,000; a Burleigh cafe at 10 kW compares it with $8,000–$12,000.
-1.3%Commercial Solar costs in Gold Coast are down around 1.3% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical 30 kW commercial system in Gold Coast
$27,000
30 kW installed after STCs, Gold Coast 2026, GST included
30 kW commercial system
$22,000-$33,000
50 kW commercial system
$35,000-$55,000
100 kW commercial system
$70,000-$110,000
$22,000$27,000$33,000
Gold Coast commercial solar is priced by the kilowatt: $8,000–$12,000 for a 10 kW system on a small shop or office, $15,000–$26,000 for 20 kW, $22,000–$33,000 for 30 kW, $35,000–$55,000 for 50 kW and $70,000–$110,000 for 100 kW, installed after STCs. Per watt that is $0.70–$1.20, with the wide Yatala and Stapylton sheds at the low end.
The building then moves a Gold Coast quote. Tilt frames on a Surfers Paradise or Southport tower roof need a structural engineering report at $800–$2,000, crane or cherry picker hire at $1,000–$3,000 a day and a dock booking; a Colorbond roof on a Molendinar or Burleigh industrial unit takes the same panels with a hoist. Older boards in the original Southport and Coolangatta shopfronts add a switchboard upgrade at $1,500–$5,000.
Anything over 30 kW may carry network upgrade or connection works at $2,000–$10,000, and commercial panel cleaning once the array is running costs $5–$15 a panel, booked often on the beachfront. All prices include GST.
Quick answerCommercial solar in Gold Coast runs $22,000–$33,000 for a 30 kW system in 2026, with roof type, switchboard condition and network connection works setting the total. All figures on this page include GST. Get free Gold Coast quotes →
Commercial Solar Prices in Gold Coast 2026: Cost Table and Price List
Service
Low
Typical
High
10 kW commercial system (small shop / office)
$8,000installed
$10,000
$12,000
20 kW commercial system
$15,000installed
$20,000
$26,000
30 kW commercial system
$22,000installed
$27,000
$33,000
50 kW commercial system
$35,000installed
$44,000
$55,000
100 kW commercial system
$70,000installed
$88,000
$110,000
Installed cost per watt, commercial (after STCs)
$0.70per W
$0.90
$1.20
Structural engineering report
$800report
$1,200
$2,000
Switchboard upgrade for a commercial system
$1,500per job
$3,000
$5,000
Network upgrade / connection works (systems over 30 kW)
$2,000per job
$5,000
$10,000
Crane or cherry picker hire
$1,000per day
$2,000
$3,000
Commercial panel cleaning
$5per panel
$10
$15
Scoping commercial solar work in Gold Coast? Get a quote from a local commercial contractor - free, no obligation.
What does a 30 kW commercial solar system cost in Gold Coast?$22,000–$33,000 installed after STCs, $27,000 typical. The next sizes: $35,000–$55,000 for 50 kW and $70,000–$110,000 for 100 kW.
What site works get added to a Gold Coast commercial solar quote?A structural engineering report at $800–$2,000, a switchboard upgrade at $1,500–$5,000 where the board is old, network upgrade or connection works at $2,000–$10,000 on systems over 30 kW, and crane or cherry picker hire at $1,000–$3,000 a day for tower and tilt-frame roofs.
Worked Commercial Solar Cost Scenarios — Gold Coast
Three Gold Coast jobs priced from the rows above: a Yatala manufacturer, a Robina office building and a Tamborine nursery. Each line names its row; the quote you get prices your own roof, board and connection.
Yatala manufacturer. A food manufacturer at Yatala fits 100 kW to a long factory roof at $70,000–$110,000, with $88,000 typical. Over 30 kW, network upgrade or connection works are quoted on their own line at $2,000–$10,000, and a crane at $1,000–$3,000 a day lifts the panel pallets.
Robina office building. The owner of a four-storey Robina office installs 30 kW on tilt frames at $22,000–$33,000. The concrete roof gets a structural engineering report at $800–$2,000 first, and the base-building switchboard is upgraded at $1,500–$5,000 to accept the inverter.
Tamborine nursery upkeep. A wholesale nursery on Tamborine Mountain runs a 20 kW array installed at $15,000–$26,000 over the potting shed and books commercial panel cleaning at $5–$15 a panel after the summer storm season has left pollen and grime on the glass.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping commercial solar work in Gold Coast? Get a quote from a local commercial contractor - free, no obligation.
Gold Coast commercial solar reaches from the Yatala and Stapylton manufacturing belt, through the industrial units at Molendinar, Arundel, Burleigh Heads and Currumbin, to Surfers Paradise and Southport towers, Robina and Varsity Lakes offices, retail at Broadbeach, Burleigh and Coolangatta, and the farms and nurseries of Tamborine, Mudgeeraba and the Numinbah Valley.
Yatala and Stapylton sheds - Manufacturing and distribution roofs at the northern end take 100 kW arrays at $70,000–$110,000, the size at which the installed cost per watt sits nearest the $0.70 floor of $0.70–$1.20.
Molendinar, Arundel and Burleigh units - Workshops and trade units buy 30 kW to 50 kW at $22,000–$33,000 to $35,000–$55,000; over 30 kW they carry network upgrade or connection works at $2,000–$10,000.
Surfers Paradise, Southport and Robina towers - Tilt frames over concrete need a structural engineering report at $800–$2,000 and crane or cherry picker hire at $1,000–$3,000 a day, on top of a 20 kW or 30 kW system at $15,000–$26,000 or $22,000–$33,000.
Broadbeach, Burleigh and Coolangatta retail - A cafe, bar or surf shop fits a 10 kW system at $8,000–$12,000; the older Southport and Coolangatta shopfronts are where a switchboard upgrade at $1,500–$5,000 joins the quote, and salt air calls for marine-grade clamps.
Tamborine and hinterland growers - Packing sheds, nurseries and coolrooms run 30 kW to 50 kW at $22,000–$33,000 to $35,000–$55,000, with commercial panel cleaning at $5–$15 a panel after the storm season.
What a Compliant Commercial Solar Quote Includes — Cost in Gold Coast
Before comparing Gold Coast quotes, check each one prices the same kilowatts and the same panel and inverter brands, states how the installer gets panels and people onto the roof, and shows site works, certificates and GST on their own lines.
System size in kW, panel count, panel and inverter make and model, and whether the inverter is single or three phase
The STC assignment shown as a separate line, so the installed price after STCs and the price before it are both visible
A structural engineering report, priced at $800–$2,000, listed as included or excluded
Switchboard upgrade work, at $1,500–$5,000 where needed, shown as its own line
For systems over 30 kW, network upgrade or connection works at $2,000–$10,000 and who lodges the network application
Crane or cherry picker hire at $1,000–$3,000 a day, and any lift, dock or after-hours access charges for towers
Commercial panel cleaning at $5–$15 a panel if a maintenance visit is bundled, priced per visit
Install, site works and any monitoring or maintenance each on its own line, on a single GST basis
The installer's accreditation number and proof of insurance
Commercial solar cost on the Gold Coast: Yatala sheds, beachfront towers and hinterland farms
A Gold Coast small business starts at $8,000–$12,000 for a 10 kW system installed after STCs (typically $10,000), then $15,000–$26,000 for 20 kW and $22,000–$33,000 for 30 kW. Manufacturers and distributors buy 50 kW at $35,000–$55,000 and 100 kW at $70,000–$110,000, and those arrays are what take the installed cost per watt to the floor of $0.70–$1.20.
The roof and the salt air then write the rest of a Gold Coast quote. New sheds at Yatala and Stapylton have clean metal decks and modern three-phase boards, so the quote stays close to the system price. Towers along the Surfers Paradise and Broadbeach strip put panels on tilt frames over concrete, bringing a structural engineering report at $800–$2,000, crane or cherry picker hire at $1,000–$3,000 a day and a dock booking, with marine-grade fixings specified for the beachfront. The older shopfronts of Southport, Coolangatta and Nerang are where a switchboard upgrade at $1,500–$5,000 most often appears.
The Clean Energy Regulator says eligibility for solar PV systems under the Small-scale Renewable Energy Scheme has been expanded from 100 kW to 1 MW for eligible systems installed from 1 October 2026, with a fixed 5-year deeming period for 100 kW to 1 MW systems, and that STC applications for those mid-scale systems will not open until mid to late November 2026. Existing arrangements for systems smaller than 100 kW are not affected. On a Gold Coast quote look for the STC line on its own, the name of whoever lodges the network application on a system over 30 kW, where $2,000–$10,000 of connection works can apply, and commercial panel cleaning at $5–$15 a panel priced per visit.
Commercial solar cost by system size in Gold Coast
Quick answerGold Coast pricing steps by kilowatts: a Burleigh cafe or Broadbeach shop sits in the $8,000–$12,000 10 kW bracket, a Molendinar workshop or Tamborine nursery at 20 kW to 30 kW pays $15,000–$26,000 to $22,000–$33,000, and a Yatala or Stapylton shed at 50 kW to 100 kW pays $35,000–$55,000 to $70,000–$110,000.
A bigger Gold Coast array buys a lower per-watt price, $0.70–$1.20 across the range with the 100 kW Yatala sheds at the bottom. Fixed items do not move with size: a structural engineering report at $800–$2,000 is much the same at 20 kW or 50 kW, and a switchboard upgrade at $1,500–$5,000 depends on the board's age, not the array.
Access and salt are the other levers on a Gold Coast job of any size. Beachfront towers need crane or cherry picker hire at $1,000–$3,000 a day plus dock and lift slots, and every coastal site from Coolangatta to Paradise Point needs fixings rated for salt air. Over 30 kW the network upgrade or connection works line at $2,000–$10,000 appears, and commercial panel cleaning at $5–$15 a panel is the running cost at every size, booked more often on the sand.
Frequently Asked Questions — Commercial Solar Cost in Gold Coast
What is the price of commercial solar in Gold Coast?
From our Gold Coast table: $8,000–$12,000 for a 10 kW commercial system (typically $10,000); $22,000–$33,000 for a 30 kW system (typically $27,000); $70,000–$110,000 for a 100 kW system (typically $88,000), all installed after STCs.
How much does a 30 kW commercial solar system cost in Gold Coast?
A 30 kW commercial solar system in Gold Coast costs $22,000–$33,000 installed after STCs, with $27,000 typical. A Southport tenancy on a tower roof adds a structural engineering report at $800–$2,000 and crane or cherry picker hire at $1,000–$3,000 a day; a Tamborine packing shed on a metal roof usually needs neither.
What does a 100 kW commercial solar system cost in Gold Coast?
Going by our Gold Coast table, expect $70,000–$110,000 for a 100 kW commercial system installed after STCs; the typical price is $88,000. Yatala and Stapylton sheds are the usual Gold Coast buyers, and network upgrade or connection works at $2,000–$10,000 are priced on top because the system is over 30 kW.
What is the installed cost per watt for commercial solar in Gold Coast?
$0.70–$1.20 per watt installed after STCs on our Gold Coast table, with $0.90 typical. The larger the array the lower the figure: a 100 kW system at $70,000–$110,000 sits near the floor, a 10 kW system at $8,000–$12,000 near the top.
Does a Gold Coast business need a switchboard or network upgrade for solar?
Often one or both. A switchboard upgrade for a commercial system costs $1,500–$5,000 and is common in the older shopfronts of Southport, Coolangatta and Nerang. Network upgrade or connection works at $2,000–$10,000 apply to systems over 30 kW, so ask the installer to show the line and name who lodges the network application.
What changed for commercial solar systems over 100 kW?
The Clean Energy Regulator says the Renewable Energy (Electricity) Regulations 2001 have been amended to expand eligibility for solar PV systems under the Small-scale Renewable Energy Scheme from 100 kW to 1 MW, applying to eligible mid-scale systems installed from 1 October 2026, with a fixed 5-year deeming period; STC applications for mid-scale systems will not open until mid to late November 2026. Existing arrangements for systems smaller than 100 kW are not affected.
Does a commercial solar install in Gold Coast need a structural engineering report?
A structural engineering report costs $800–$2,000 on our Gold Coast table, typically $1,200. Owners of Surfers Paradise, Southport and Robina towers usually ask for one before tilt frames go onto a concrete roof; a single-storey metal unit at Molendinar rarely needs it.
What does commercial solar panel cleaning cost in Gold Coast?
Commercial panel cleaning in Gold Coast costs $5–$15 a panel, with $10 a panel typical. Beachfront sites from Coolangatta to Surfers Paradise book it more often because of salt spray; have the quote price it per visit.
Do Gold Coast commercial solar installers need accreditation?
For mid-scale systems of 100 kW to 1 MW, the Clean Energy Regulator says the system must have its panels, batteries or inverters listed on the Clean Energy Council list of approved components and meet Solar Accreditation Australia install guidelines. Ask for the accreditation number on your Gold Coast quote and check the panel and inverter models against the listed products.