Updated November 2026·Independently researched·11 min read
Commercial signage in Townsville runs $1,800–$5,000
for an illuminated lightbox fascia sign installed, GST included - letters, pylons, graphics and wraps below
A lit lightbox fascia over a Townsville shopfront is $1,800–$5,000 installed, with $3,000 typical. A Bohle transport yard putting a single-tenant pylon on its road frontage is looking at $8,000–$30,000, while a Palmer Street bar that only wants a footpath A-frame pays $120–$600.
+4.5%Commercial Signage costs in Townsville are up around 4.5% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical illuminated lightbox fascia in Townsville
$3,000
per sign installed, Townsville 2026, GST included
Illuminated lightbox fascia sign, installed
$1,800-$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000-$10,000
Single-tenant pylon sign, 4-6 m, installed
$8,000-$30,000
$1,800$3,000$5,000
Sign type sets the price of commercial signage in Townsville. On this page's rows an illuminated lightbox fascia is $1,800–$5,000 installed, an illuminated 3D letter set $3,000–$10,000, a single-tenant pylon of 4 to 6 metres $8,000–$30,000 and a multi-tenant pylon of 8 metres and up $15,000–$50,000. Glazing is priced by the square metre: $40–$180 for frosted or privacy film and $80–$250 for printed graphics.
Two Townsville quotes for the same fascia rarely differ on the sign itself; they differ on the site. A pylon on a Garbutt or Mount St John frontage carries cyclone-rated fixings and engineering and is usually booked for the dry-season install window, a tenancy at Stockland Townsville or Castletown has the centre's own sign guidelines to meet as well as the council's, and anything printed on a Strand frontage takes a UV load that the quote should answer with a UV-stable laminate. Every illuminated sign needs an electrical connection by a licensed electrician at $200–$2,400, shown as a separate line.
Then come the smaller lines. Design and artwork setup is $150–$960 if the logo only exists as a JPEG, taking down a previous tenant's sign and making good the wall is $200–$800 when a Flinders Street shop changes hands, and a full van wrap at $3,500–$8,500 puts the name on the side of every service van heading out of Garbutt. Prices include GST.
Quick answerCommercial signage in Townsville runs $1,800–$5,000 for an illuminated lightbox fascia sign installed in 2026, $3,000–$10,000 for a set of illuminated 3D letters and $8,000–$30,000 for a single-tenant pylon, with the fascia size, illumination and council approvals setting the total. All figures on this page include GST. Get free Townsville quotes →
Commercial Signage Prices in Townsville 2026: Cost Table and Price List
Service
Low
Typical
High
Illuminated lightbox fascia sign, installed
$1,800per sign
$3,000
$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000per set
$5,500
$10,000
Face-lit LED 3D letter, 300-500 mm (letters only)
$150per letter
$400
$700
Single-tenant pylon sign, 4-6 m, installed
$8,000per sign
$18,000
$30,000
Multi-tenant pylon sign, 8 m and up, installed
$15,000per sign
$30,000
$50,000
Monument or entry sign, installed
$2,500per sign
$6,000
$18,000
Printed A-frame sign
$120per sign
$300
$600
Frosted or privacy window film, installed
$40/m²
$100
$180
Printed window or wall graphics, installed
$80/m²
$150
$250
Full vehicle wrap, car or sedan
$2,500per vehicle
$3,500
$4,500
Full vehicle wrap, van
$3,500per vehicle
$5,500
$8,500
Statutory safety sign, supply only
$7.50each
$40
$165
Wayfinding sign suite, per office floor
$2,000per floor
$3,500
$6,000
Electrical connection for an illuminated sign
$200per sign
$600
$2,400
Design and artwork setup
$150per job
$400
$960
Old sign removal and make-good
$200per job
$450
$800
Scoping commercial signage work in Townsville? Get a quote from a local commercial contractor - free, no obligation.
What does an illuminated shopfront sign cost in Townsville?$1,800–$5,000 installed for a lightbox fascia, $3,000 typical. A set of illuminated 3D letters costs $3,000–$10,000, and the electrical connection by a licensed electrician is a separate $200–$2,400 line.
What gets added to a Townsville signage quote?Design and artwork setup at $150–$960 when there are no vector files, old sign removal and make-good at $200–$800 when taking over a tenancy, the electrical connection at $200–$2,400 for anything illuminated, and the council's own permit fee where a sign needs approval.
Worked Commercial Signage Cost Scenarios — Townsville
Three Townsville jobs worked from this page's rows: a Palmer Street restaurant, a Douglas office floor and a Bohle transport depot. Each line names the row it comes from; your own quote prices your frontage, access and approvals.
Palmer Street restaurant. A restaurant opening in a Palmer Street tenancy in South Townsville pays $200–$800 to have the last operator's sign taken down and the fascia made good, then installs an illuminated lightbox fascia at $1,800–$5,000 ($3,000 typical), with the licensed electrician's connection at $200–$2,400 as its own line, frosted film across the lower glass at $40–$180 a square metre and a printed A-frame for the footpath at $120–$600.
Douglas office floor. A practice taking a floor in a Douglas building orders a wayfinding sign suite at $2,000–$6,000 for the floor, statutory safety signs supply-only at $7.50–$165 each for the stairwells and plant room, and a set of illuminated 3D letters behind reception at $3,000–$10,000, plus design and artwork setup at $150–$960 because the logo files are not vector.
Bohle transport depot. A transport operator on a Bohle road frontage stands up a single-tenant pylon of 4 to 6 metres at $8,000–$30,000, typically $18,000, with the cyclone-rated engineering certificate and the council application both named on the quote, and wraps three vans at $3,500–$8,500 each.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping commercial signage work in Townsville? Get a quote from a local commercial contractor - free, no obligation.
In Townsville the signage work spreads from the CBD, Flinders Street and The Strand, along Palmer Street in South Townsville and Charters Towers Road in Hermit Park, into the centres at Stockland Townsville, Castletown and Willows, and out to the industrial frontages of Garbutt, Bohle, Mount St John and Stuart, with hospitality along Palmer Street, The Strand and the Magnetic Island ferry precinct.
Retail strips: Flinders Street, Palmer Street, Hermit Park, The Strand - Most strip shops order an illuminated lightbox fascia at $1,800–$5,000 or illuminated 3D letters at $3,000–$10,000, then frosted film on the glass at $40–$180 a square metre and a printed A-frame at $120–$600; on The Strand the printed faces should carry a UV-stable laminate named on the quote.
Shopping centres: Stockland Townsville, Castletown, Willows - Centre tenancies tend to specify illuminated 3D letters on the bulkhead, $3,000–$10,000 installed or $150–$700 a letter supplied alone, and the centre's own sign guidelines apply on top of the council's approval.
Industrial frontages: Garbutt, Bohle, Mount St John, Stuart - A single-tenant pylon on the road at $8,000–$30,000, a multi-tenant pylon at $15,000–$50,000 at an estate entry and a monument or entry sign at $2,500–$18,000 by the gate, each with cyclone-rated engineering and the certificate on the quote.
Offices: the CBD, Garbutt, Douglas - A wayfinding sign suite at $2,000–$6,000 a floor, statutory safety signs supply-only at $7.50–$165 each, and printed window or wall graphics in reception at $80–$250 a square metre.
Fleets and hospitality: Garbutt, Palmer Street, The Strand - A full van wrap at $3,500–$8,500 and a car or sedan wrap at $2,500–$4,500 for trades and service fleets working out of Garbutt; venues on Palmer Street and The Strand add menu and price displays, which the ACCC says must show one total price including GST to consumers.
What a Compliant Commercial Signage Quote Includes — Cost in Townsville
Before comparing Townsville quotes, check each one prices the same sign size, substrate and illumination, says whether install, electrical connection and council approval are in or out, and shows design, removal and GST on their own lines.
Sign type, dimensions, substrate and finish - lightbox, fabricated letters, pylon, film or print - with illumination stated as face-lit, halo or unlit
Install as its own line, naming access equipment such as a boom lift or scaffold and any after-hours or traffic-management requirement
Electrical connection for an illuminated sign at $200–$2,400, done by a licensed electrician, with the certificate named
Design and artwork setup at $150–$960 where no print-ready vector files are supplied, or a nil line where they are
Old sign removal and make-good at $200–$800 when the frontage carries a previous tenant's sign
Sign-permit or planning application fees shown as a pass-through at the council's published rate, and who lodges it
Engineering certification for a pylon, monument or projecting sign, and the wind rating it is built to
Warranty terms on LEDs, laminates and print fade, and the service call-out basis after the warranty
A single GST basis across every line, with the sign company's ABN and proof of insurance
Commercial signage cost in Townsville: strip shops, centres and cyclone-rated frontages
For a Townsville shopfront, commercial signage cost starts with an illuminated lightbox fascia at $1,800–$5,000 installed, typically $3,000, or illuminated 3D letters at $3,000–$10,000; on an industrial frontage it climbs to $8,000–$30,000 for a single-tenant pylon and $15,000–$50,000 for a multi-tenant pylon at an estate entry. Bought by the letter, a face-lit LED letter of 300 to 500 mm is $150–$700 before install, and a monument or entry sign at a gate is $2,500–$18,000.
Most of the remaining spread in a Townsville quote comes from the site. Pylons and projecting signs on Garbutt, Bohle and Stuart frontages carry cyclone-rated fixings and engineering and are usually booked for the dry-season install window; Stockland Townsville and Castletown tenancies add an approval step and often a letter style set by the centre; printed faces on The Strand need UV-stable laminates. Around the sign sit the electrical connection at $200–$2,400, design and artwork setup at $150–$960 where files are not vector, and old sign removal and make-good at $200–$800 on a changeover.
Whether a sign needs planning approval is set by the state planning scheme and the council, and each council publishes its own sign-permit fee schedule; the quote should name who lodges the application and show the council fee as a pass-through line rather than folding it into the sign price. For a Townsville pylon or lit fascia, ask at the site visit whether the sign company or the business lodges with the council, and have the engineering certificate listed beside the council fee line.
Commercial signage cost by sign type and size in Townsville
Quick answerTownsville pricing steps by sign type: a Palmer Street cafe sits around the $120–$600 A-frame and the $1,800–$5,000 lightbox, a Castletown or Willows tenancy at $3,000–$10,000 for illuminated 3D letters, and a Bohle or Mount St John frontage at $8,000–$30,000 to $15,000–$50,000 for a pylon.
In Townsville, size works on a sign price two ways. Lightboxes and fascias are priced on width and illumination, so a wide lit frontage on Flinders Street sits toward the top of $1,800–$5,000; fabricated letters are priced per letter at $150–$700 for a 300 to 500 mm face-lit letter, so a long trading name across a Stockland Townsville bulkhead climbs through the $3,000–$10,000 set band. Film and print go by the square metre, $40–$180 for frosting and $80–$250 for printed graphics, so a fully glazed CBD frontage is simply more metres.
Height is the second lever. A single-tenant pylon of 4 to 6 metres at $8,000–$30,000 needs a footing, cyclone-rated engineering and a crane day; a multi-tenant pylon of 8 metres and up at $15,000–$50,000 at a Bohle estate entry needs the same at a bigger scale plus a council application. Vehicles scale the same way, from a car or sedan wrap at $2,500–$4,500 to a full van wrap at $3,500–$8,500 for a long-wheelbase service van out of Garbutt.
Frequently Asked Questions — Commercial Signage Cost in Townsville
What is the price of commercial signage in Townsville?
From our Townsville table: $1,800–$5,000 for an illuminated lightbox fascia sign installed (typically $3,000); $3,000–$10,000 for an illuminated 3D letter set (typically $5,500); $8,000–$30,000 for a single-tenant pylon sign (typically $18,000).
How much does an illuminated shopfront sign cost in Townsville?
An illuminated lightbox fascia sign in Townsville costs $1,800–$5,000 installed, with $3,000 typical, plus the electrical connection at $200–$2,400 by a licensed electrician. A Flinders Street or CBD frontage above a footpath can add after-hours access and a boom lift to the install line; a single-storey shop in Hermit Park often needs neither.
What does a pylon sign cost in Townsville?
Going by our Townsville table, a single-tenant pylon sign of 4 to 6 metres costs $8,000–$30,000 installed, typically $18,000, and a multi-tenant pylon of 8 metres and up $15,000–$50,000. Transport and trade yards at Garbutt, Bohle and Mount St John are the usual Townsville buyers, and the quote should name the cyclone-rated engineering certificate, the footing and who lodges the council application.
How much are illuminated 3D letters in Townsville?
A set of 5 to 8 illuminated 3D letters installed costs $3,000–$10,000 on our Townsville table, with $5,500 typical; priced per letter, a face-lit LED letter of 300 to 500 mm is $150–$700 for the letters alone, before install.
Do I need council approval for a sign in Townsville?
Whether a sign needs planning approval is set by the state planning scheme and the council, and each council publishes its own sign-permit fee schedule; the quote should name who lodges the application and show the council fee as a pass-through line rather than folding it into the sign price. For a Townsville pylon on a Bohle or Garbutt frontage, or a centre tenancy at Stockland Townsville or Castletown, ask the sign company to say up front whether an application is needed, who lodges it, and to keep the council fee as its own line.
Who connects an illuminated sign in Townsville?
Energy Safe Victoria says to always engage a registered electrical contractor, who sends a licensed electrician, that do-it-yourself electrical work is illegal and that a Certificate of Electrical Safety is issued for installation work; Building Commission NSW says a licence is required for any electrical wiring work regardless of value, with a Certificate of Compliance for Electrical Work lodged through its eCert portal. On our Townsville table the electrical connection for an illuminated sign is $200–$2,400, with $600 typical, and the sign quote should show it as its own line.
What do window graphics and frosting cost in Townsville?
Frosted or privacy window film costs $40–$180 a square metre installed in Townsville, and printed window or wall graphics $80–$250 a square metre. Glazed frontages in the CBD, on The Strand and at Castletown are the usual Townsville jobs, and the quote should price film and print by the square metre with the measured area shown and a UV-stable laminate named on anything printed.
What does a vehicle wrap cost in Townsville?
A full wrap on a car or sedan costs $2,500–$4,500 in Townsville, with $3,500 typical, and a full van wrap $3,500–$8,500. Trade and service fleets based around Garbutt, Bohle and Stuart are the usual Townsville buyers; fleet pricing is per vehicle, and the quote should name the film brand, the laminate and the warranty.
What signs does a Townsville workplace have to have?
The National Construction Code 2022, Volume One Part E4, requires an exit sign on, above or beside every required exit, direction signs where an exit is not readily apparent, and exit signs that comply with AS/NZS 2293.1 or the Specification 25 photoluminescent alternative and are lit whenever the building is occupied. WorkSafe ACT classes workplace safety signs as prohibition, mandatory, danger, warning, emergency and fire signs, with colours and placement set by AS 1319-1994 Safety signs for the occupational environment, and the Safe Work Australia model code of practice for the work environment says exit locations should be easy to identify, with signs pointing to exit doors. Supply-only statutory safety signs cost $7.50–$165 each on our Townsville table. A Townsville office floor in the CBD or Douglas usually pairs those with a wayfinding sign suite at $2,000–$6,000; ask to see the floor plan the signs were set out from.
Related Commercial Signage Cost Guides — Townsville