Updated November 2026·Independently researched·11 min read
Commercial signage in Gold Coast runs $1,800–$5,000
for an illuminated lightbox fascia sign installed, GST included - letters, pylons, graphics and wraps below
On the Gold Coast, an illuminated lightbox fascia runs $1,800–$5,000 installed, and most land near $3,000. A Yatala manufacturer putting a single-tenant pylon on its road frontage is looking at $8,000–$30,000; a James Street Burleigh Heads boutique that just wants a footpath A-frame spends $120–$600.
+4.5%Commercial Signage costs in Gold Coast are up around 4.5% over the past year, re-verified against 90+ sources in November 2026.Year on year
Typical illuminated lightbox fascia in Gold Coast
$3,000
per sign installed, Gold Coast 2026, GST included
Illuminated lightbox fascia sign, installed
$1,800-$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000-$10,000
Single-tenant pylon sign, 4-6 m, installed
$8,000-$30,000
$1,800$3,000$5,000
Sign type sets the Gold Coast price before anything else. An illuminated lightbox fascia installed sits at $1,800–$5,000, a set of illuminated 3D letters at $3,000–$10,000, a single-tenant pylon of 4 to 6 metres at $8,000–$30,000 and a multi-tenant pylon of 8 metres and up at $15,000–$50,000. On the glass, frosted film is $40–$180 a square metre and printed graphics $80–$250 a square metre.
The coast itself changes the spec. Salt air from the Broadwater down to Coolangatta is hard on mild-steel frames, so a Main Beach or Coolangatta quote should name marine-grade aluminium and fixings; a Pacific Fair or Robina Town Centre tenancy works to the centre's signage guidelines as well as the council's; and a Surfers Paradise frontage above a busy footpath means a boom lift and an early-morning or after-hours install. Anything lit adds an electrical connection by a licensed electrician at $200–$2,400, which belongs on its own line.
Then the extras: $150–$960 for design and artwork setup when the logo exists only as a screenshot, $200–$800 to take down a previous tenant's sign and make good the wall on a Tedder Avenue changeover, and $3,500–$8,500 to wrap a van so the brand is on the road between jobs. All prices include GST.
Quick answerCommercial signage in Gold Coast runs $1,800–$5,000 for an illuminated lightbox fascia sign installed in 2026, $3,000–$10,000 for a set of illuminated 3D letters and $8,000–$30,000 for a single-tenant pylon, with the fascia size, illumination and council approvals setting the total. All figures on this page include GST. Get free Gold Coast quotes →
Commercial Signage Prices in Gold Coast 2026: Cost Table and Price List
Service
Low
Typical
High
Illuminated lightbox fascia sign, installed
$1,800per sign
$3,000
$5,000
Illuminated 3D letter set, installed (5-8 letters)
$3,000per set
$5,500
$10,000
Face-lit LED 3D letter, 300-500 mm (letters only)
$150per letter
$400
$700
Single-tenant pylon sign, 4-6 m, installed
$8,000per sign
$18,000
$30,000
Multi-tenant pylon sign, 8 m and up, installed
$15,000per sign
$30,000
$50,000
Monument or entry sign, installed
$2,500per sign
$6,000
$18,000
Printed A-frame sign
$120per sign
$300
$600
Frosted or privacy window film, installed
$40/m²
$100
$180
Printed window or wall graphics, installed
$80/m²
$150
$250
Full vehicle wrap, car or sedan
$2,500per vehicle
$3,500
$4,500
Full vehicle wrap, van
$3,500per vehicle
$5,500
$8,500
Statutory safety sign, supply only
$7.50each
$40
$165
Wayfinding sign suite, per office floor
$2,000per floor
$3,500
$6,000
Electrical connection for an illuminated sign
$200per sign
$600
$2,400
Design and artwork setup
$150per job
$400
$960
Old sign removal and make-good
$200per job
$450
$800
Scoping commercial signage work in Gold Coast? Get a quote from a local commercial contractor - free, no obligation.
What does an illuminated shopfront sign cost in Gold Coast?$1,800–$5,000 installed for a lightbox fascia, $3,000 typical. A set of illuminated 3D letters costs $3,000–$10,000, and the electrical connection by a licensed electrician is a separate $200–$2,400 line.
What gets added to a Gold Coast signage quote?Design and artwork setup at $150–$960 when there are no vector files, old sign removal and make-good at $200–$800 when taking over a tenancy, the electrical connection at $200–$2,400 for anything illuminated, and the council's own permit fee where a sign needs approval.
Worked Commercial Signage Cost Scenarios — Gold Coast
Three Gold Coast jobs priced from the rows on this page: a Burleigh Heads cafe, a Robina office tenancy and a Molendinar workshop. Each line names its row, and a real quote prices your own frontage, materials and approvals.
James Street Burleigh Heads cafe. A cafe opening on James Street pays $200–$800 to have the last tenant's sign taken down and the wall made good, puts up an illuminated lightbox fascia at $1,800–$5,000 with $3,000 the typical spend, adds the electrical connection at $200–$2,400 as a separate line, and finishes with frosted film on the lower glass at $40–$180 a square metre and a printed A-frame for the footpath at $120–$600.
Robina office tenancy. A professional firm moving onto a Robina office floor orders a wayfinding sign suite at $2,000–$6,000 for the floor, supply-only statutory safety signs at $7.50–$165 each for the exits and plant room, and illuminated 3D letters behind reception at $3,000–$10,000; because the logo files are not vector, design and artwork setup adds $150–$960.
Molendinar workshop. A fabrication workshop on a Molendinar street frontage installs a single-tenant pylon of 4 to 6 metres at $8,000–$30,000, $18,000 typical, built in marine-grade aluminium with the engineering certificate and council application named on the quote, and wraps three service vans at $3,500–$8,500 each.
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Scoping commercial signage work in Gold Coast? Get a quote from a local commercial contractor - free, no obligation.
The Gold Coast's signage work stretches from the street frontages of Southport, Surfers Paradise and Broadbeach, through the strips at Tedder Avenue Main Beach, James Street Burleigh Heads and Griffith Street Coolangatta and the centres at Pacific Fair, Robina Town Centre and Harbour Town, to the office parks of Robina, Varsity Lakes and Bundall and the industrial estates of Yatala, Molendinar, Burleigh and Arundel.
Beachside strips: Main Beach, Burleigh Heads, Coolangatta - The usual order is an illuminated lightbox fascia at $1,800–$5,000 or a set of illuminated 3D letters at $3,000–$10,000, with frosted film on the glass at $40–$180 a square metre and a printed A-frame at $120–$600; this close to the water the frame and fixings should be marine-grade.
Shopping centres: Pacific Fair, Robina Town Centre, Harbour Town - Centre tenancies are lettered to the centre's guidelines, which apply as well as the council's approval: $3,000–$10,000 for an installed set of illuminated 3D letters on the bulkhead, or $150–$700 a letter for the letters alone.
Industrial estates: Yatala, Molendinar, Burleigh, Arundel - A single-tenant pylon on the street at $8,000–$30,000, a multi-tenant pylon at an estate entry at $15,000–$50,000 and a monument or entry sign at the gate at $2,500–$18,000, each quoted with engineering certification.
Offices: Robina, Varsity Lakes, Bundall, Southport - Office fit-outs take a wayfinding sign suite at $2,000–$6,000 per floor, supply-only statutory safety signs at $7.50–$165 each, and printed window or wall graphics in reception at $80–$250 a square metre.
Fleets and hospitality: Arundel, Surfers Paradise, Broadbeach - Trades and delivery fleets out of Arundel and Molendinar wrap vans at $3,500–$8,500 and cars or sedans at $2,500–$4,500; venues in Surfers Paradise, Broadbeach and Burleigh add menu and price displays, which the ACCC says must show one total price including GST to consumers.
What a Compliant Commercial Signage Quote Includes — Cost in Gold Coast
Before comparing Gold Coast quotes, check each one prices the same sign size, substrate and illumination, says whether install, electrical connection and council approval are in or out, and shows design, removal and GST on their own lines.
Sign type, dimensions, substrate and finish - lightbox, fabricated letters, pylon, film or print - with illumination stated as face-lit, halo or unlit
Install as its own line, naming access equipment such as a boom lift or scaffold and any after-hours or traffic-management requirement
Electrical connection for an illuminated sign at $200–$2,400, done by a licensed electrician, with the certificate named
Design and artwork setup at $150–$960 where no print-ready vector files are supplied, or a nil line where they are
Old sign removal and make-good at $200–$800 when the frontage carries a previous tenant's sign
Sign-permit or planning application fees shown as a pass-through at the council's published rate, and who lodges it
Engineering certification for a pylon, monument or projecting sign, and the wind rating it is built to
Warranty terms on LEDs, laminates and print fade, and the service call-out basis after the warranty
A single GST basis across every line, with the sign company's ABN and proof of insurance
Commercial signage cost on the Gold Coast: beachside strips, centres and estates
Commercial signage cost on the Gold Coast for a shopfront begins with an illuminated lightbox fascia at $1,800–$5,000 installed, typically $3,000, or illuminated 3D letters at $3,000–$10,000 for the set. Freestanding signs climb from there: $2,500–$18,000 for a monument or entry sign, $8,000–$30,000 for a single-tenant pylon and $15,000–$50,000 for a multi-tenant pylon at a Yatala or Arundel estate entry. Bought by the letter, a face-lit LED letter of 300 to 500 mm costs $150–$700 before install.
Where the sign goes decides much of the rest. Within reach of the salt, from the Broadwater to Griffith Street Coolangatta, frames and fixings move to marine-grade aluminium; a Pacific Fair or Harbour Town tenancy adds a centre guideline step and often a set letter style; a Surfers Paradise or Broadbeach frontage adds a boom lift and an off-peak install; a Yatala pylon adds wind engineering and a footing. Alongside sit the electrical connection at $200–$2,400, design and artwork setup at $150–$960 where the files are not vector, and old sign removal and make-good at $200–$800 on a changeover.
Whether a sign needs planning approval is set by the state planning scheme and the council, and each council publishes its own sign-permit fee schedule; the quote should name who lodges the application and show the council fee as a pass-through line rather than folding it into the sign price. For a Gold Coast sign that needs approval, ask the sign company to name who lodges with the council and to carry the council's published fee as a pass-through line.
Commercial signage cost by sign type and size in Gold Coast
Quick answerOn the Gold Coast the steps are by sign type: a Burleigh Heads or Coolangatta cafe sits in the $120–$600 A-frame and $1,800–$5,000 lightbox range, a Pacific Fair or Robina Town Centre tenancy at $3,000–$10,000 for illuminated 3D letters, and a Yatala or Molendinar frontage at $8,000–$30,000 to $15,000–$50,000 for a pylon.
A Gold Coast sign gets dearer with size in two ways. Fascias and lightboxes are priced on width and illumination, so a long lit frontage facing the Broadbeach foreshore sits near the top of $1,800–$5,000; fabricated letters are priced one by one at $150–$700 for a 300 to 500 mm face-lit letter, so a long trading name across a Robina Town Centre bulkhead works up through the $3,000–$10,000 set band. Film and print go by the square metre, $40–$180 for frosting and $80–$250 for printed graphics, so a fully glazed Southport ground floor is simply more metres.
Height is the second lever. A single-tenant pylon of 4 to 6 metres at $8,000–$30,000 needs a footing, engineering and a crane day; a multi-tenant pylon of 8 metres and up at $15,000–$50,000 at a Yatala estate entry needs the same at a larger scale plus a council application. Vehicles step up the same way: $2,500–$4,500 for a car or sedan wrap against $3,500–$8,500 for a full wrap on a long-wheelbase van working out of Arundel.
Frequently Asked Questions — Commercial Signage Cost in Gold Coast
What is the price of commercial signage in Gold Coast?
From our Gold Coast table: $1,800–$5,000 for an illuminated lightbox fascia sign installed (typically $3,000); $3,000–$10,000 for an illuminated 3D letter set (typically $5,500); $8,000–$30,000 for a single-tenant pylon sign (typically $18,000).
How much does an illuminated shopfront sign cost in Gold Coast?
An illuminated lightbox fascia sign in Gold Coast costs $1,800–$5,000 installed, with $3,000 typical, plus the electrical connection at $200–$2,400 by a licensed electrician. A Surfers Paradise or Broadbeach frontage usually adds a boom lift and an off-peak install to that line, and anything near the beach should be quoted in marine-grade aluminium; a single-storey shop on James Street Burleigh Heads often needs neither the lift nor the night work.
What does a pylon sign cost in Gold Coast?
Going by our Gold Coast table, a single-tenant pylon sign of 4 to 6 metres costs $8,000–$30,000 installed, typically $18,000, and a multi-tenant pylon of 8 metres and up $15,000–$50,000. On the Gold Coast the usual buyers are estates at Yatala, Molendinar and Arundel, and the quote should name the engineering certificate, the footing, the materials grade and who lodges the council application.
How much are illuminated 3D letters in Gold Coast?
A set of 5 to 8 illuminated 3D letters installed costs $3,000–$10,000 on our Gold Coast table, with $5,500 typical; priced per letter, a face-lit LED letter of 300 to 500 mm is $150–$700 for the letters alone, before install.
Do I need council approval for a sign in Gold Coast?
Whether a sign needs planning approval is set by the state planning scheme and the council, and each council publishes its own sign-permit fee schedule; the quote should name who lodges the application and show the council fee as a pass-through line rather than folding it into the sign price. On the Gold Coast the council's own fee schedule sits on top, and a Pacific Fair, Robina Town Centre or Harbour Town tenancy adds the centre's own signage approval; ask the sign company to show the fee as a pass-through line and say who lodges.
Who connects an illuminated sign in Gold Coast?
Energy Safe Victoria says to always engage a registered electrical contractor, who sends a licensed electrician, that do-it-yourself electrical work is illegal and that a Certificate of Electrical Safety is issued for installation work; Building Commission NSW says a licence is required for any electrical wiring work regardless of value, with a Certificate of Compliance for Electrical Work lodged through its eCert portal. On our Gold Coast table the electrical connection for an illuminated sign is $200–$2,400, with $600 typical, and the sign quote should show it as its own line.
What do window graphics and frosting cost in Gold Coast?
Frosted or privacy window film costs $40–$180 a square metre installed in Gold Coast, and printed window or wall graphics $80–$250 a square metre. Glazed frontages in Southport, Broadbeach and the Robina and Varsity Lakes office parks are the usual Gold Coast jobs; the quote should price film and print by the square metre, show the measured area and name a UV-stable laminate.
What does a vehicle wrap cost in Gold Coast?
A full wrap on a car or sedan costs $2,500–$4,500 in Gold Coast, with $3,500 typical, and a full van wrap $3,500–$8,500. Trades and delivery fleets based at Arundel, Molendinar and Yatala are the usual Gold Coast buyers; wraps are priced per vehicle, and the quote should name the film brand and the warranty.
What signs does a Gold Coast workplace have to have?
The National Construction Code 2022, Volume One Part E4, requires an exit sign on, above or beside every required exit, direction signs where an exit is not readily apparent, and exit signs that comply with AS/NZS 2293.1 or the Specification 25 photoluminescent alternative and are lit whenever the building is occupied. WorkSafe ACT classes workplace safety signs as prohibition, mandatory, danger, warning, emergency and fire signs, with colours and placement set by AS 1319-1994 Safety signs for the occupational environment, and the Safe Work Australia model code of practice for the work environment says exit locations should be easy to identify, with signs pointing to exit doors. Supply-only statutory safety signs cost $7.50–$165 each on our Gold Coast table. A Gold Coast office floor in Robina or Bundall usually adds a wayfinding sign suite at $2,000–$6,000; ask for the floor plan the signs were set out from.
Related Commercial Signage Cost Guides — Gold Coast