Independent Australian Cost Guides
Updated October 2026

How much does plastering cost in Perth?

Most plastering jobs in Perth cost $160–$2,625
from a single room to a whole house
Gyprock per sqm in Perth costs $26–$68/sqm. A single room of plasterboard costs $630–$2,625. A 3-bedroom house – typically 8–10 rooms and ceilings – runs $5,040–$26,250 at the single-room rate. Repairs (cracks, holes) cost $160–$295.

Want an exact price for your job?

A local installer calls you with a real number — usually same day.

Your number goes to one or two local tradies — never five, never a call centre, never resold.

You're in. We’ll text you to ask what you need done — reply there. A local installer will be in touch about your job. No spam, no middleman.

+3.5% Plastering costs in Perth are up around 3.5% over the past year, re-verified against 90+ sources in October 2026. Year on year

Perth plasterers charge $52–$125 an hour, or $26–$68 a square metre to hang and set new Gyprock, with the sheets bought on top. Re-skimming the walls of one room comes to $630–$2,625, and replacing the ceiling of a single room, from strip-out to paint-ready, is $840–$3,150. Small fixes are priced as a visit: a patched hole is $160–$295 and a filled crack $84–$315. Homes here are large by national standards, so the cost of doing a whole house comes down to counting its rooms and ceilings rather than one flat price. All figures include GST.

Comparing cities, or after the Australia-wide picture? See the national guide: Plastering cost in Australia.

Quick answerPlastering in Perth costs $52–$125 /hr, with most averaging $81 /hr. GST included — verified October 2026. Get free Perth quotes →
Perth plastering pricing guide 2026$

Detailed Pricing — Plastering Cost in Perth 2026

ServiceLowTypicalHigh
Plastering (hourly rate)$52/hr$81$125
Plasterboard / Gyprock, labour (per sqm)$26/sqm$43$68
Patch repair (small hole)$160per job$240$295
Crack repair (per crack, filled and set ready for paint)$84per job$180$315
Single room re-skim (walls)$630total$1,250$2,625
Ceiling replacement (single room, 12–16 m²: strip-out, new plasterboard, set ready for paint)$840total$2,000$3,150
Cornice installation (per linear metre)$10/lm$16$52
Water damage repair$315per job$735$1,575
Skim coat (per sqm)$16/sqm$29$52
New stud wall (non-load-bearing, framed, plasterboard both sides, set ready for paint; per m² of wall face)$63/sqm$100$160
Acoustic / soundproof plasterboard (per sqm)$37/sqm$58$89
Full day plastering$370per day$580$890
Step 1 of 2

What do you need a callback about?

One tap — we'll show you the going rate, then take your number.

You're in.

A local installer will be in touch about your job. No spam, no middleman.

Getting quotes for plastering work in Perth? Get a quote from a verified local tradie — free, no obligation.

Get Perth quotes →
Prices verified October 2026 · Cross-referenced against 90+ Australian trade pricing sources · See methodology

Prices include GST. Based on Perth metro area, October 2026. Outer suburbs may vary.

Get a fair plastering quote in Perth

Local tradies · Free quotes. No obligation, no spam.

Get Quotes in Perth →Max 2 tradies will contact you

Cost to replace a Gyprock ceiling in Perth (2026): ceilings, walls and per m² rates

A plasterer in Perth charges $370–$890 a day, with $580 typical, and prices most jobs per square metre: $26–$68/m² to hang and set plasterboard (Gyprock) and $16–$52/m² for a skim coat over existing walls. As whole jobs, replastering the walls of a single room is $630–$2,625, replacing a room's ceiling $840–$3,150, patching a small hole $160–$295 and new cornice $10–$52 per metre. Painting is a separate trade and price.

JobLowTypicalHigh
Plasterboard / Gyprock (per m²)$26/m²$43$68
Skim coat (per m²)$16/m²$29$52
Full day plastering$370/day$580$890
Single room re-skim (walls)$630$1,250$2,625
Ceiling replacement (single room, 12–16 m²: strip-out, new plasterboard, set ready for paint)$840$2,000$3,150
Patch repair (small hole)$160$240$295
Cornice installation (per m)$10/m$16$52

How plasterers in Perth charge: the day rate ($370–$890) is what sits behind the per-square-metre prices; a plasterer quotes the job from the area and the finish rather than the hours. Gyprocking a whole house is the per-m² rate ($26–$68/m²) across every wall and ceiling, plus cornice; a skim coat ($16–$52/m²) is the cheaper way to get old, sound walls smooth again.

What moves a plastering quote in Perth:

For a plastering quote in Perth that compares, give the square metres of wall and ceiling, the finish level and whether the old plaster has to come off.

Factors affecting plastering cost in Perth

What Affects Plastering Costs in Perth

Gyprocking a whole house

Four or more bedrooms is the layout of 45.7% of Perth dwellings, against 34.8% nationally (ABS 2021 Census), so a full re-sheet here tends to cover more rooms and more ceiling than a typical Australian home. Measure each wall and ceiling in square metres and multiply by the labour rate, typically $43, then add board, compound and cornice, or ask the plasterer for a room-by-room price instead.

Brick walls, not just board

Perth has a strong double-brick building tradition, and in those homes the internal walls are plaster on masonry rather than sheets on a timber frame. Cracks in that solid plaster are filled and set at $84–$315 each, a skim over a tired wall is $16–$52 a square metre, and plasterboard turns up mainly on ceilings and on any new framed wall ($63–$160).

Ceilings after a wet winter

Most of Perth's rain falls in June, July and August, with July the wettest month at 147.0 mm (BOM averages), and a blocked gutter or cracked roof tile in those months is a common reason a ceiling ends up stained or sagging. Water damage repair is $315–$1,575; once the sheet has dropped, a new ceiling for one room is typically $2,000. Fix the roof first or the new board will fail the same way.

Heat, cold and drying time

Setting compound cures as it dries, and Perth weather pushes it both ways. February averages a top of 31.7 °C, hot enough to skin the surface before the coat underneath has firmed, while July nights fall to 8.1 °C on average (BOM averages) and stretch the wait between coats. A paint-ready finish takes several coats with sanding in between, so ask how many days are allowed rather than pushing for a fast sign-off.

Labour, supply and the day rate

Many searches here ask what Gyprock costs per square metre, and the answer depends on what is in the price: our $26–$68 band is labour only, with the board supplied by the plasterer or by you. For a scatter of odd jobs, a booked day at $370–$890 can beat paying separately for each one, and cornice is quoted by the metre at $10–$52.

Quieter shared walls

Semi-detached homes such as townhouses and villas are 14.2% of Perth dwellings, a little above the 12.6% national share (ABS 2021 Census). Where a bedroom backs onto next door, acoustic plasterboard at $37–$89 cuts more noise than standard sheet. It only works if the wall cavity is insulated and the gaps are sealed, so ask what the price includes beyond the board itself.

How to Save Money on Plastering Cost in Perth

1
When comparing Gyprock prices per square metre, check whether each quote includes the sheets, compound and cornice, or labour alone.
2
If a ceiling is already stained, have the roof and gutters checked before the June rains so the repair is not undone in the wettest months.
3
Plan setting work away from the hottest February days where you can, or ask the plasterer how they stop the compound drying too fast.
4
In a double-brick home, ask whether a recurring crack needs a fill and skim or a look at movement in the wall first.
5
Save a list of dents, holes and cracks for one booked day at $370–$890 rather than calling the plasterer out for each.
6
Empty the room and tape plastic over doorways before sanding starts; fine dust travels quickly through a large open-plan home.

Plastering Cost in Perth by Room Size

Quick answerIn Perth a room is priced from its wall and ceiling area: a skim over solid plaster is $16–$52 a square metre, and new plasterboard labour is $26–$68 a square metre.

Say a double-brick bedroom in Perth has 26 square metres of wall to be skimmed and a 14 square metre ceiling to be sheeted. The skim at $16–$52 a square metre is $416–$1,352, and the ceiling at $26–$68 a square metre is $364–$952, a combined $780–$2,304. A single-room ceiling replacement row of $840–$3,150 also covers the strip-out.

What moves a room that size in Perth: crack movement in a double-brick wall, a wet winter that leaves a stained ceiling and a water damage repair of $315–$1,575, February heat that skins the compound surface, and a bedroom that backs onto next door and takes acoustic board at $37–$89 a square metre. Larger four-bedroom homes repeat the job room by room.

Plastering Cost in Perth: What the Quote Should Include

Double-brick houses are part of Perth's building tradition, so a plastering quote there should say whether the walls are plaster on masonry or sheets on a frame, and price each differently. Ask for every line to be written out so it can be read against the rows on this page.

Frequently Asked Questions — Plastering Cost in Perth

What does a plasterer cost per hour in Perth?
In our Perth table the hourly line is $52–$125, typically $81.
What do plasterers charge for a full day in Perth?
Going by our Perth table, expect $370–$890 a day for a full day of plastering; the typical price is $580.
How much should I pay to replaster a ceiling in Perth?
For replacing the ceiling of a single room, our Perth table shows $840–$3,150, with a typical price of $2,000.
How much does a plasterer cost per sqm in Perth?
Plasterboard installation labour in Perth costs $26–$68/sqm for standard walls. Ceilings cost 20–30% more. Hourly rates run $52–$125/hr for labour-only work.
How much does plastering a whole house cost in Perth?
Plastering a full 3-bedroom house in Perth – typically 8–10 rooms and ceilings at the single-room rate ($630–$2,625) – costs $5,040–$26,250, including supply and installation of all plasterboard, stopping, and cornice. A single room costs $630–$2,625.
What do plasterers charge for a small patch repair in Perth?
For a small patch repair, our Perth table shows $160–$295, with a typical price of $240.
How much does acoustic plasterboard cost in Perth?
Acoustic plasterboard is $37–$89 a square metre in our Perth table, typically $58.
Does a plasterer need to be licensed in Perth?
For small repairs and plasterboard installation, licensing requirements vary by state. For larger jobs, many states require the plasterer or builder to hold a licence or registration once the job's value passes a threshold that varies by state — check your state's rules.
What is the price of a skim coat in Perth?
Going by our Perth table, expect $16–$52 a square metre for a skim coat; the typical price is $29.

Our Methodology

These are independent estimates from public cost guides, marketplaces and industry rate data, and no tradesperson can influence them, so always get a few quotes. Last reviewed October 2026. Read our full methodology →

Advertise with us

Reach thousands of Australian homeowners researching trade costs. Fill in your details and we'll be in touch within 1 business day.

Thanks! We'll be in touch

Expect a reply within 1 business day.

Got a question about costs?
Chat with Sam
Sam the Platypus
Online now
Powered by What's The Damage