How much does concreting cost in Spring Hill?
Mix of Victorian terraces, interwar semis and some newer apartment blocks near Broadway. Heritage conservation areas cover much of the older residential streets — check with your tradie if heritage concealment cabling is needed. Travel surcharges are rarely a factor — Spring Hill is well within the inner Brisbane tradie belt.
Spring Hill falls within a heritage conservation area. For concreter work this can mean requirements around concealed runs, material matching, and council notification for certain changes. Always confirm heritage conditions apply to your specific property before work begins.
Difficult — inner-city permit zones throughout. Metered parking available but limited duration.
How Spring Hill compares to nearby suburbs
Prices shift suburb-to-suburb based on travel time, parking, and local housing stock.
| Suburb | Concreter rate | Zone | Tradie supply |
|---|---|---|---|
| Fortitude Valley 🏛 | Inner | Very limited | |
| Petrie Terrace | Nearby | Good | |
| Paddington 🏛 | Inner | Hilly/limited | |
| Red Hill | Nearby | Good | |
| Cbd | Nearby | Good |
Concreting in Spring Hill costs $75–$150 per sqm for a standard plain concrete slab, with decorative options like exposed aggregate running $120–$200/sqm. Most residential driveways fall in the $2,600–$9,000 range depending on size and finish.
Prices depend on the finish type, slab thickness, site access, soil conditions, and whether old concrete needs removing first. We've compiled this data from concreters across Spring Hill, plus hipages, ServiceSeeking, and Airtasker listings as of June 2026.
Detailed Pricing — Spring Hill 2026
| Service | Low | Typical | High |
|---|---|---|---|
| Plain concrete slab (per sqm) | $75/sqm | $110 | $150 |
| Coloured concrete (per sqm) | $95/sqm | $140 | $200 |
| Exposed aggregate (per sqm) | $120/sqm | $160 | $200 |
| Stamped / stencilled (per sqm) | $120/sqm | $155 | $200 |
| Polished concrete (per sqm) | $100/sqm | $170 | $270 |
| Spray-on resurfacing (per sqm) | $50/sqm | $65 | $80 |
| Driveway — plain (typical 40 sqm) | $2,600total | $4,000 | $6,000 |
| Driveway — exposed aggregate | $4,800total | $6,500 | $9,000 |
| Concrete path / footpath | $75/sqm | $110 | $160 |
| Concrete patio / entertaining | $80/sqm | $125 | $180 |
| Shed slab (typical 20 sqm) | $1,500total | $2,200 | $3,500 |
| Old concrete removal | $30/sqm | $50 | $80 |
Prices include GST. Based on Brisbane metro area, Mar 2026. Outer suburbs may vary.
What to Know About Concreting Work in Spring Hill
Spring Hill sits immediately north of Brisbane's CBD with a heritage-rich residential pocket of colonial-era cottages and grand Queenslanders. Electricians encounter some of Brisbane's oldest residential wiring here — properties dating to the 1860s with multiple generations of electrical additions layered on top. Heritage listing restrictions mean all external work must be approved and sympathetically integrated.
Common concreting issues in Spring Hill: Foreshore areas have basalt rather than sandstone substrate. Heritage sidewalk requirements apply to front paths. Small job sizes typical — courtyards and rear paths.
Access & parking: Permit-only residential streets — some areas near Broadway have metered parking.
Concreting rates in Spring Hill typically range from $46–$115/sqm, with most concreters quoting around $74/sqm. This reflects Spring Hill's position in the inner zone of Brisbane, where moderate demand and mixed housing stock keep prices close to the Brisbane metro average.
What Affects Concreting Costs in Spring Hill
Finish type
Plain concrete ($75–$150/sqm in Spring Hill) is the cheapest. Coloured ($95–$200/sqm), exposed aggregate ($120–$200/sqm), and polished ($100–$270/sqm) all cost progressively more.
Area size
Larger areas in Spring Hill often get a lower per-sqm rate. A 20 sqm shed slab will cost more per sqm than a 60 sqm driveway due to fixed setup costs being spread over less area.
Site access & preparation
If a bobcat or pump truck can't access your Spring Hill site easily, manual labour increases costs. Sloping blocks, retaining walls, or soft soil may need extra preparation.
Old concrete removal
Removing existing concrete in Spring Hill adds $30–$80/sqm. This includes saw-cutting, breaking, and disposal. Factor this in if you're replacing an old driveway or patio.
Reinforcement & thickness
Driveways need stronger reinforcement (typically SL82 mesh or rebar) than paths. Thicker slabs (100mm+ for driveways vs 75mm for paths) use more concrete.
Season & weather
Concrete cures best in mild Spring Hill conditions. Very hot or very cold weather can affect scheduling and may require additives, which add to the cost.
How to Save Money on Concreting in Spring Hill
Frequently Asked Questions
Our Methodology
Prices on this page are compiled from publicly available cost guides, leading tradie marketplaces, peak industry body data, and individual tradesperson websites across Australia. We cross-reference ranges from multiple sources and adjust for city-specific cost differences based on advertised rates, salary data, and cost-of-living indicators. Our price guides are produced independently. Pricing is compiled from public quotes, industry rate guides, and marketplace data, and no tradesperson can influence a published figure. All prices are estimates and will vary based on your specific job. Always get multiple quotes. Last reviewed June 2026. Read our full methodology →