How much does concreting cost in Chermside?
A rapidly developing mix of older fibro and brick homes, new apartment towers and commercial buildings. The Western Brisbane tradie market is strong and competitive — hourly rates tend to run 5–10% below inner-city equivalents for comparable work. Most Brisbane tradies service Chermside at standard rates, though some add a small travel fee of $18–40 depending on their base.
Good parking throughout suburban streets. Not a factor.
How Chermside compares to nearby suburbs
Prices shift suburb-to-suburb based on travel time, parking, and local housing stock.
| Suburb | Concreter rate | Zone | Tradie supply |
|---|---|---|---|
| Stafford | Nearby | Good | |
| Kedron | Nearby | Good | |
| Wavell Heights | Nearby | Good | |
| Aspley | Nearby | Good | |
| Mcdowall | Nearby | Good |
Concreting in Chermside costs $75–$150 per sqm for a standard plain concrete slab, with decorative options like exposed aggregate running $120–$200/sqm. Most residential driveways fall in the $2,600–$9,000 range depending on size and finish.
Prices depend on the finish type, slab thickness, site access, soil conditions, and whether old concrete needs removing first. We've compiled this data from concreters across Chermside, plus hipages, ServiceSeeking, and Airtasker listings as of August 2026.
Detailed Pricing — Chermside 2026
| Service | Low | Typical | High |
|---|---|---|---|
| Plain concrete slab (per sqm) | $75/sqm | $110 | $150 |
| Coloured concrete (per sqm) | $95/sqm | $140 | $200 |
| Exposed aggregate (per sqm) | $120/sqm | $160 | $200 |
| Stamped / stencilled (per sqm) | $120/sqm | $155 | $200 |
| Polished concrete (per sqm) | $100/sqm | $170 | $270 |
| Spray-on resurfacing (per sqm) | $50/sqm | $65 | $80 |
| Driveway — plain (typical 40 sqm) | $2,600total | $4,000 | $6,000 |
| Driveway — exposed aggregate | $4,800total | $6,500 | $9,000 |
| Concrete path / footpath | $75/sqm | $110 | $160 |
| Concrete patio / entertaining | $80/sqm | $125 | $180 |
| Shed slab (typical 20 sqm) | $1,500total | $2,200 | $3,500 |
| Old concrete removal | $30/sqm | $50 | $80 |
You're in.
A local installer will be in touch about your job. No spam, no middleman.
Prices include GST. Based on Brisbane metro area, August 2026. Outer suburbs may vary.
What to Know About Concreting Work in Chermside
Chermside is a major suburban hub with both established residential areas and newer medium-density developments near the Westfield shopping centre. Electricians handle a mix of older home upgrades and new apartment fitouts. Many of the 1960s–1970s brick homes need switchboard replacements and rewiring to support modern air conditioning loads — a critical requirement in Brisbane's subtropical climate.
Common concreting issues in Chermside: Large driveways and flat blocks make pours efficient. Good concrete supply logistics from western Brisbane plants. Competitive pricing from a large trade pool.
Access & parking: Good in residential areas — CBD area has paid parking.
Concreting rates in Chermside typically range from $41–$101/sqm, with most concreters quoting around $64/sqm. This reflects Chermside's position in the west zone of Brisbane, where good tradie supply and easier access keep prices below the Brisbane metro average.
What Affects Concreting Costs in Chermside
Finish type
Plain concrete ($75–$150/sqm in Chermside) is the cheapest. Coloured ($95–$200/sqm), exposed aggregate ($120–$200/sqm), and polished ($100–$270/sqm) all cost progressively more.
Area size
Larger areas in Chermside often get a lower per-sqm rate. A 20 sqm shed slab will cost more per sqm than a 60 sqm driveway due to fixed setup costs being spread over less area.
Site access & preparation
If a bobcat or pump truck can't access your Chermside site easily, manual labour increases costs. Sloping blocks, retaining walls, or soft soil may need extra preparation.
Old concrete removal
Removing existing concrete in Chermside adds $30–$80/sqm. This includes saw-cutting, breaking, and disposal. Factor this in if you're replacing an old driveway or patio.
Reinforcement & thickness
Driveways need stronger reinforcement (typically SL82 mesh or rebar) than paths. Thicker slabs (100mm+ for driveways vs 75mm for paths) use more concrete.
Season & weather
Concrete cures best in mild Chermside conditions. Very hot or very cold weather can affect scheduling and may require additives, which add to the cost.
How to Save Money on Concreting in Chermside
Frequently Asked Questions
Our Methodology
Prices on this page are compiled from publicly available cost guides, leading tradie marketplaces, peak industry body data, and individual tradesperson websites across Australia. We cross-reference ranges from multiple sources and adjust for city-specific cost differences based on advertised rates, salary data, and cost-of-living indicators. Our price guides are produced independently. Pricing is compiled from public quotes, industry rate guides, and marketplace data, and no tradesperson can influence a published figure. All prices are estimates and will vary based on your specific job. Always get multiple quotes. Last reviewed August 2026. Read our full methodology →